Summary of the content on the page No. 1
Elo Entuitive Touchmonitor
User Guide
For 12.1" LCD Kiosk Touchmonitors
1247L Series
Revision A
Summary of the content on the page No. 2
Elo Entuitive Touchmonitor User Guide 12.1" LCD Kiosk Touchmonitor 1247L Series Revision A P/N 008570 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com
Summary of the content on the page No. 3
Copyright © 2003 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Summary of the content on the page No. 4
iv
Summary of the content on the page No. 5
Table of Contents Chapter 1 Chapter 4 Introduction 1 Troubleshooting 17 Product Description . . . . . . . . . . . . . . . . 1 Solutions to Common Problems . . . . . . . . 17 Precautions . . . . . . . . . . . . . . . . . . . . 1 Appendix A About the Product . . . . . . . . . . . . . . . . . 2 Native Resolution 19 Chapter 2 Installation and Setup 3 Appendix B Unpacking Your Touchmonitor. . . . . . . . . . . 3 Touchmonitor Safety 21 Product Overview . . . . . . .
Summary of the content on the page No. 6
C H A P TER 1 C HAPT ER 1INTRODUCTION Product Description Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. This LCD monitor incorporates 12.1” color active matrix thin-film-transistor (TFT) liquid crystal display to provide super
Summary of the content on the page No. 7
About the Product Your LCD Desktop Touchmonitor is a 12.1” SVGA TFT color display with the following features: High contrast color TFT LCD display support resolution up to SVGA 800x600. Compatible with IBM VGA and VESA. Power management system conforms to VESA DPMS standard. Universal power adapter. Supports DDC1/2B for Plug & Play compatibility. Advanced OSD control for picture quality adjustment. VESA lat panel monitor physical mounting inerface(75mm) Optional touch screen func
Summary of the content on the page No. 8
C HA P T E R 2 C HAP TER2INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 9 items are present and in good condition: Serial cable VGA cable European power cable Brick power supply CD and Quick Install Power cable US/Canada Guide OSD Remote 2-3
Summary of the content on the page No. 9
Product Overview Main Unit Rear View 2-4 Elo Entuitive Tou chmon ito r User Guide
Summary of the content on the page No. 10
Touch Interface Connection NOTE: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 1 Connect one end of the power adapter to the monitor and the other end to the connector of the power cord. 2 Connect one end of the video cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding. 3 Connect one end of the touchscreen (RS232) cable to the
Summary of the content on the page No. 11
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows XP Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 Additional drivers and driver information for other operating systems (including MS DOS, Windows 3.x, OS/2, Macintosh and Linux) are available on the Elo TouchSystems web site at www.elotouch.com. Your
Summary of the content on the page No. 12
Installing the Serial Touch Driver Installing the Serial Touch Driver for Windows XP, 2000, Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. 3 Follow the directions on the screen to complete the driver setup for your version of Windows. 4
Summary of the content on the page No. 13
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter).
Summary of the content on the page No. 14
C H A P TER 3 C HAP TER 3OPERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 800x600 at 60-75 Hz. Use the Display control panel in Windows to choose 800x600 resolution. Operating in other resolutions will degrade video performance. For f
Summary of the content on the page No. 15
− − Control Function Turns the display system power on or off. Power Switch 1 UP Displays the OSD menus on the screen and used to 2 select (“Up” direction) the OSD control options on the screen. Displays the OSD menus on the screen and used to Down 3 select (“Down” direction) the OSD control options on the screen. Adjusts the increasing value of the selected OSD + 4 control option. − Adjusts the decreasing value of the selected 5 OSD control option. 3-1
Summary of the content on the page No. 16
CONNECTIONS ON UNDERSIDE 4 2 3 1 1 Power Connector Connect the power adapter. 2 Video Connector This can be connected with the D-sub 15 pin signal connector. 3 Touchscreen connector This is for connecting the touch panel RS232 connector. (optional) 4 OSD Remote connector Connect the remote function key. 3-11
Summary of the content on the page No. 17
Controls and Adjustment OSD Menu Functions To Display and Select the OSD Functions: 1 Press once to display the OSD function main menu. UP 2 Press a second time to select the different OSD control option. DOWN UP DOWN To Adjust the Value of the Control Option: 1 Pressing + / - button changes the value of the selected OSD control option. DOWN UP After adjusting the values, the monitor will automatically save the changes when user selected Save Exit. DOWN UP NOTE: The OSD screen will disappear if
Summary of the content on the page No. 18
OSD Control Options OSD Menu Brightness Adjust the brightness using + and − buttons. Contrast Adjust the contrast using + and − buttons Color Adjust the value of color gain (RED, GREEN, or BLUE) using + and - buttons. Auto Tune Press + buttons to make LCD monitor adjust the related parameters automatically for optimal display status. 3-13
Summary of the content on the page No. 19
OSD Menu Qualtity (included Frequency, Phase, Track and Text/GRP) Frequency This item is used to decrease the vertical interference. 1 Select one display pattern from your computer. 2 Use + and − buttons on the LCD monitor to decrease the vertical interference to get the optimal display. Phase This item is used to decrease the horizontal interference. 1 Select one display pattern from your computer. 2 Use + and − buttons on the LCD monitor to decrease the horizontal interference to get the opt
Summary of the content on the page No. 20
OSD Menu OSD Menu Position (included Horizontal and Vertical) Horizontal Pressing + moves the display image to the right; Pressing − moves the display image to the left. Vertical Pressing + moves the display image upward; Pressing − moves the display image downward. Language (included ENGLISH, CHINESE, JAPANESE) Press + and - buttons to select English, Chinese and Japanese) Recall Press + or - buttons to recall values. Save Exit Pressing + or – buttons to save adjusting values and ex
