Summary of the content on the page No. 1
Owner's
Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not followed.
Keep others and pets away
from equipment when in use.
Always make sure all bolts and
nuts are tightened prior to
each use.
Summary of the content on the page No. 2
TABLE OF CONTENTS Page Page Safety Instructions 2 Maintenance 19 Before You Begin 4 Conditioning Guidelines 20 Warm-up and Cool-Down 21 Equipment Warning & Notice Labels 5 Hardware Identification Chart 6 Product Parts Drawing 22 Parts List 23 Assembly Instructions 7 Warranty 25 Set Up Instructions 13 Notes 26 Operational Instructions 14 Fax/Mail Ordering Form 27 Computer Instructions 15 Storage 19 SAFETY INSTRUCTIONS WARNING: To reduce the risk of serious injury, read the following Safety I
Summary of the content on the page No. 3
CALL US FIRST Customer Service 1(800) 375-7520 www.staminaproducts.com THANK YOU FOR PURCHASING THE Magnetic Fusion 7200 Bike To help you get started, we have pre-assembled most of your Magnetic Fusion 7200 Bike at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular workouts, you will be getting your body into shape and be on your way to achieving a happier and healthier lifes
Summary of the content on the page No. 4
BEFORE YOU BEGIN Thank you for choosing the Magnetic Fusion 7200 Although Stamina constructs its products with the Bike. We take great pride in producing this quality finest materials and uses the highest standards of product and hope it will provide many hours of quality manufacturing and quality control, there can exercise to make you feel better, look better, and sometimes be missing parts or incorrectly sized enjoy life to its fullest. parts. If you have any questions or problems with I
Summary of the content on the page No. 5
EQUIPMENT WARNING & NOTICE LABELS This chart is provided to help identify the warning & notice labels on the Magnetic Fusion 7200 Bike. Please take a moment to familiarize yourself with all of the warning & notice labels. Label is larger than actual size W1 WARNING LABEL(109) 5
Summary of the content on the page No. 6
HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers or the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 02 1/2 1 1/2 1/2 3 1/2 4 1/2 5 1/2 6 in. mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 length MILLIMETERS 6 8 10 12 NOTICE: The length of all bolts and screws, except those w
Summary of the content on the page No. 7
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1-800-375-7520 or e-mail us at customerservice@staminaproducts.com. STEP 1 Make the WHEEL(62) on the FRONT STABILIZER(2
Summary of the content on the page No. 8
ASSEMBLY INSTRUCTIONS STEP 3 Attach the REAR STABILIZER(6) to the REAR FRAME(5) with CARRIAGE BOLTS(M8x1.25x75mm)(69), ARC WASHERS(M8)(98), LOCK WASHERS(M8)(100), and ACORN NUTS(M8x1.25)(96). STEP 4 Screw the STAND(68) all the way up into the bottom of the FRONT FRAME(1). Connect the PULSE EXTENSION WIRE(43) to the CONTROL WIRE(25). Insert the REAR FRAME(5) onto the FRONT FRAME(1) and secure with BUTTON HEAD BOLTS(M10x1.5x20mm)(74), BUTTON HEAD BOLTS(M10x1.5x53mm) (75), ARC WASHERS(M10)(99), WAS
Summary of the content on the page No. 9
ASSEMBLY INSTRUCTIONS Socket of Pulse Extension Wire(43) STEP 5 Attach the SEAT FRAME(8) to the SEAT CARRIAGE(7) with BUTTON HEAD BOLTS(M10x1.5x200mm)(76), WASHERS(M10)(99), LOCK WASHERS(M10)(101), and ACORN NUTS(M10x1.5)(97). STEP 6 NOTE: The PULSE SENSOR WIRES(55) go through the tube of the HANDRAIL(9). Be careful not to damage the wires when inserting the BUTTON HEAD BOLTS(M8x1.25x45mm)(71) through the holes in the HANDRAIL(9) when attaching it to the SEAT CARRIAGE(7). To attach the HANDRAIL(
Summary of the content on the page No. 10
ASSEMBLY INSTRUCTIONS STEP 8 Attach the SEAT(59) and BACK CUSHION(60) to the SEAT FRAME(8) with ROUND HEAD BOLTS (M6x1x38mm)(82). STEP 9 Refer to the inset drawing. Press the NUT CAPS(M10)(53) onto the NYLOCK NUTS(M10x1.5)(95) on both sides of the SEAT CARRIAGE(7). 10
Summary of the content on the page No. 11
ASSEMBLY INSTRUCTIONS STEP 10 NOTE: The RIGHT PEDAL(41) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(41) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(39) has L stamped on the end of the pedal shaft. The LEFT PEDAL(39) has left hand threads and is tightened by turning counterclockwise. Thread the RIGHT PEDAL(41) into the RIGHT CRANK(36) as shown. Tighten the pedal securely. Select the RIGHT PEDAL STRAP(42) which has R marked on it. Snap the two hole
Summary of the content on the page No. 12
ASSEMBLY INSTRUCTIONS A. B. Socket of Power Wire(28) STEP 12 Refer to illustration A. Run the CONNECTION WIRE(26) through the hole in the plate on the HANDLEBAR(4). Attach the HANDLEBAR(4) to the UPRIGHT(3) with BUTTON HEAD BOLT(M8x1.25x40mm)(70) and FLAT HEAD SCREWS(M6x1x12mm)(78). STEP 13 Plug the CONNECTION WIRE(26) into the EXTENSION WIRE on the COMPUTER(27). Attach the COMPUTER(27) to the plate on the HANDLEBAR(4) with ROUND HEAD SCREWS(M5x0.8x15mm)(86). STEP 14 Attach the MOUNTING BRACKET(
Summary of the content on the page No. 13
SET UP INSTRUCTIONS Place the Magnetic Fusion 7200 Bike in the area where it will be used. It is recommended that the Magnetic Fusion 7200 Bike be placed on an equipment mat. The Magnetic Fusion 7200 Bike is approximately 57 3/8 inches long (max.) x 24 1/2 inches wide x 51 3/4 inches tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 7 feet long is required for safe operation of the Magnetic Fusion 7200 Bike. Make sure that adequate space is available for access to and passa
Summary of the content on the page No. 14
OPERATIONAL INSTRUCTIONS SEAT ADJUSTMENT Proper seat adjustment is important. There are nine adjustment holes in the SEAT RAIL(45). These adjustment holes allow users to adjust the position of the seat for efficient exercise. 1. Rotate the ADJUSTMENT KNOB(49) counterclockwise until the pin releases when the knob is pulled. Pull the ADJUSTMENT KNOB(49) and slide the SEAT CARRIAGE(7) up or down to desired position. Lock the SEAT CARRIAGE(7) in position by inserting the pin of the ADJUSTMENT KNOB(4
Summary of the content on the page No. 15
COMPUTER INSTRUCTIONS Your Magnetic Fusion 7200 Bike utilizes a magnetic braking system to create resistance for your workout. You control the amount and pattern of this resistance by means of the advanced computer console mounted at the center of the handlebar. We recommend that you use this computer console to vary your workout from session to session and note your progress toward your fitness goals. When used regularly in this way, the computer console can become an important source of motiva
Summary of the content on the page No. 16
COMPUTER INSTRUCTIONS PROGRAM NUMBER HEART RATE CONTROL PROGRAMS TIME CALORIE / WATT AGE / TARGET H.R. SPEED / RPM PULSE DISTANCE HEART SYMBOL PROGRAM PROFILE LCD DISPLAY INSTRUCTIONS PROGRAM: Displays programs for selection during setup, from P1 to P12. Displays the selected program during exercise. TIME: Displays the time. Counts upward from one second to 99:59 minutes. Counts down from preset value. SPEED/RPM: Displays the current speed from zero to 99.9 miles per hour, or RPM from zero to 99
Summary of the content on the page No. 17
COMPUTER INSTRUCTIONS PROGRAM DESCRIPTIONS This computer contains 12 different programs. You can preset the program time and the computer will divide the time chosen into 10 intervals. If you do not set the program time in advance, the computer will default to a 30 minute workout time. (P1) MANUAL MANUAL PROGRAM: P1 is a manual program allowing the user to have full manual control of the workload. Use the " " button to increase the load. Use the " " button to decrease the load. PRESET PROGRAMS:
Summary of the content on the page No. 18
COMPUTER INSTRUCTIONS HEART RATE CONTROL PROGRAMS: P11 and P12 are preset automatic Heart Rate Control Programs. You must input your age and always hold the pulse sensors on the HANDRAIL(9) with both hands when using the Heart Rate Control Programs. P11 is programmed to use 60% of your maximum heart rate as your target heart rate zone workout goal, and P12 is programmed to use 85% of your maximum heart rate as your target heart rate zone workout goal; therefore, P11 will be a less intense workou
Summary of the content on the page No. 19
COMPUTER INSTRUCTIONS OPERATION DESCRIPTIONS 1. To stop a running program, press the START / STOP button. In this mode, you can press the START / STOP button again to continue to run the current program. Or, you can use " / " buttons to select a new program. The function values of DISTANCE and CALORIE will continue to accumulate. 2. When you complete a program, press the START / STOP button to stop the program. You can use " / " buttons to select a new program. The function values of DISTANCE an
Summary of the content on the page No. 20
CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually by monitoring your heart rate while you exercise. Remember to follow these essentials: Have your doctor review your training and diet programs. Begin your training program slowly with realistic goals that have been set by you and your
