Summary of the content on the page No. 1
Owner's Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Summary of the content on the page No. 2
TABLE OF CONTENTS Page Page Safety Precautions 2 Adjustment Instructions 15 Before You Begin 4 Conditioning Guidelines 17 Hardware Illustrations 5 Warm-up and Cool-Down 18 Assembly Instructions 6 Warranty 19 Set Up Instructions 10 Product Parts Drawing 20 Operational Instructions 11 Parts List 21 Storage 14 Fax/Mail Ordering Form 23 Maintenance 14 SAFETY PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following Safety Precautions before using the UX2 AIR BIKE. 1.
Summary of the content on the page No. 3
CALL US FIRST THANK YOU FOR PURCHASING THE STAMINA UX2 AIR BIKE To help you get started, we have pre-assembled most of your UX2 AIR BIKE at the factory with the exception of those few parts left unassembled for shipping purposes. Simply follow the few assembly instructions set forth in this manual. With regular workouts you will be getting your body into shape and on your way to achieving a happier and healthier lifestyle. Should you have any questions, please call our Customer Service Departme
Summary of the content on the page No. 4
BEFORE YOU BEGIN Thank you for choosing the UX2 AIR BIKE. We Although Stamina constructs its products with the take great pride in producing this quality product and finest materials and uses the highest standards of hope it will provide many hours of quality exercise to manufacturing and quality control, there can make you feel better, look better and enjoy life to its sometimes be missing parts or incorrectly sized fullest. parts. If you have any questions or problems with Yes, it's a
Summary of the content on the page No. 5
HARDWARE IDENTIFICATION CHART This chart is provided to help identify the hardware used in the assembly process. Place the washers, the end of the bolts, or screws on the circles to check for the correct diameter. Use the small scale to check the length of the bolts and screws. 3/16" 1/4" 5/16" 3/8" 1/2" INCHES 02 1/2 1 1/2 1/2 3 1/2 4 1/2 5 1/2 6 in. mm. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 length MILLIMETERS 6 8 10 12 NOTICE: The length of all bolts and screws except those with
Summary of the content on the page No. 6
ASSEMBLY INSTRUCTIONS Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part please call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com STEP 1 Insert REAR SUPPORT(2) into the MAIN FRAME(1
Summary of the content on the page No. 7
ASSEMBLY INSTRUCTIONS Strap STEP 4 Attach the SEAT(43) to the SEAT POST(4) with NYLOCK NUTS(M8x1.25)(62) and WASHERS(M8)(67). Slide BELLOWS(45) over the SEAT POST(4). Insert the SEAT POST(4) into the MAIN FRAME(1) and lock in position with LOCKING KNOB(46). STEP 5 Slide the Cable of the TENSION KNOB(27) into the slot on the MONITOR POST(5). Hook the top end of the TENSION KNOB(27) into the square hole on the MONITOR POST(5) and secure with FLAT HEAD SCREW (M5x0.8x15mm)(58). STEP 6 There is a str
Summary of the content on the page No. 8
ASSEMBLY INSTRUCTIONS L R L R STEP 7 There is a "R" decal on the RIGHT HANDLEBAR(7) and RIGHT LINKAGE(74). Refer to above illustration. Press a LINKAGE BUSHING(42) into the RIGHT LINKAGE(74). Attach the RIGHT LINKAGE(74) onto the bottom end of LOWER BAR(8) with HEX HEAD BOLT(M8x1,25x45mm)(61), WASHER (M8xø22mmx1.5mm)(68), ARC WASHER(M8)(71), and NYLOCK NUT(M8x1.25)(62). STEP 8 Attach the right LOWER BAR ASSEMBLY(8) to the RIGHT HANDLEBAR(7) with ROUND HEAD BOLTS (M6x1x12mm)(59) and ARC WASHERS(M
Summary of the content on the page No. 9
ASSEMBLY INSTRUCTIONS IMPORTANT STUDY THE ABOVE ILLUSTRATION AND READ ALL OF STEP 11 "a" through "g" BEFORE ATTACHING PEDALS AND CONNECTING LINKAGES. STEP 11 The RIGHT PEDAL(32) has R marked on the bottom side of the pedal. The LEFT PEDAL(31) has NOTE: L marked on the bottom side of the pedal. Both PEDALS(31, 32) have RIGHTHAND THREADS. Tighten both PEDALS(31, 32) by turning clockwise. a. Push PEDAL BUSHINGS(33), with SHOULDER facing outside, into LINKAGE CONNECTORS(75). b. Insert PEDAL SHAFTS
Summary of the content on the page No. 10
SET UP INSTRUCTIONS Place the UX2 AIR BIKE in the area where it will be used. It is recommended that the UX2 AIR BIKE be placed on an equipment mat. The UX2 AIR BIKE is approximately 42 1/2" long x 22 1/4" wide x 45 1/4" tall. (These dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation of the UX2 AIR BIKE. Make sure that adequate space is available for access to and passage around the UX2 AIR BIKE. LEVELING: Use the LEVELING CAPS(48) on the FRONT
Summary of the content on the page No. 11
OPERATIONAL INSTRUCTIONS USING THE MONITOR POWER ON : Pedal movement or push the MODE button. POWER OFF : Automatic shut off after four minutes of inactivity. MODE BUTTON: Press to select display functions, include SCAN, TIME, SPEED, DISTANCE, and CALORIES. Press and hold for three seconds to reset all functions to zero. FUNCTIONS: SCAN: Automatically scans each function of TIME, SPEED, DISTANCE, and CALORIES in sequence with change every four seconds. Press and release the MODE button until "S
Summary of the content on the page No. 12
OPERATIONAL INSTRUCTIONS SEAT HEIGHT ADJUSTMENT Proper seat height is important for efficient exercise. To determine proper seat height, sit on the bike and center the ball of your foot on the pedal in the down position. Your leg should be slightly bent and relaxed as shown. If your leg is too straight or your foot cannot touch the pedal, you will need to lower the seat. If your leg is bent too much you will need to raise the seat. Remove the LOCKING KNOB(46). Lower or raise the SEAT(43) to the
Summary of the content on the page No. 13
OPERATIONAL INSTRUCTIONS Exercise Workout The secret to aerobic training is achieving a selected heart rate and maintaining it. The UX2 AIR BIKE, with its air resistance system allows the user to easily attain the desired pulse rate. Since no two people or life styles are alike, the UX2 AIR BIKE has been designed to allow the user to isolate portions of the body that may need greater emphasis in training. These exercises provide cardiovascular conditioning, muscle toning and joint flexing wi
Summary of the content on the page No. 14
STORAGE 1. To store the UX2 AIR BIKE simply keep it in a clean dry place. 2. The UX2 AIR BIKE is 42 1/2" long x 22 1/4" wide x 45 1/4" tall. 3. The UX2 AIR BIKE must be lifted for movement. Two people may be required. 4. To avoid damage to the electronics, remove the batteries before storing the UX2 AIR BIKE for one year or more. MAINTENANCE The safety and integrity designed into the UX2 AIR BIKE can only be maintained when the UX2 AIR BIKE is regularly examined for damage and wear. Special atte
Summary of the content on the page No. 15
ADJUSTMENT INSTRUCTIONS Chain Adjustment Chain Adjustment required if the Chain is too loose. 1. Loosen the NUTS(3/8"-26)(66) on both sides of the fan. 2. Adjust the NUT(M6x1)(65) on the chain side of bike to remove all slack from the chain. 3. Adjust the NUT(M6x1)(65) on the side opposite the chain so that the center of the NUT(3/8"-26)(66) is the same distance from TAB on both sides of bike. TAB 4. Tighten the NUTS(3/8"-26)(66) on both sides of the fan. Fan Adjustment Fan Adjustment is require
Summary of the content on the page No. 16
ADJUSTMENT INSTRUCTIONS Hold the FAN(18) so that the FRONT SPROCKET is on your left side as shown. STEP 6: STEP 7: Loosen NUTS "A" and "B" until at least 1/2" of FAN AXLE is showing between NUT "A" and the FAN BUSHING. STEP 8: Tighten NUT "C" completely until it bottoms out on the last FAN AXLE thread. STEP 9: Tighten NUT "A" completely against FAN BUSHING, then back off 1/4 turn or until the FAN AXLE has a very small amount of play side to side. STEP 10: Hold NUT "A" and tighten NUT "B" com
Summary of the content on the page No. 17
CONDITIONING GUIDELINES How you begin your exercise program depends on your physical condition. If you have been inactive for several years or are severely overweight, start slowly and increase your workout time gradually. Increase your workout intensity gradually, too, by monitoring your heart rate while you exercise. Remember to follow these essentials: Have your doctor review your training and diet programs. Begin your training program slowly with realistic goals that have been set by you a
Summary of the content on the page No. 18
WARM-UP and COOL-DOWN Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump rope, and running in place Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength or aerobic training se
Summary of the content on the page No. 19
LIMITED WARRANTY MODEL 15-0960 WARRANTY Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship under normal use, service and proper operation for a period of 90 days on the parts and one year on the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAI
Summary of the content on the page No. 20
20 PRODUCT PARTS DRAWING FRONT BACK
