Summary of the content on the page No. 1
X-Micro EVA 310 MP3 PLAYER
User Manual
V1.0
Summary of the content on the page No. 2
Contents 1. Precautions ……………………………………………………………………………………………………2 2. System requirement……………………………………………………………………………………………4 3. Installation instruction…………………………………………………………………………………………5 3.1 Installing the driver ………………………………………………………………………………………4 3.2 Recharge function ………………………………………………………………………..………………… 4. Connecting/ downloading/ disconnecting……………………………………………………………………5 4.1 Connect to PC………………………………………………………………………………….……………5 4.2 Download …………………………………………………………………………………………………6 4.3 Remo
Summary of the content on the page No. 3
6.2.2 Play voice files…………………………………………………………………………………………11 6.3 FM Tuner………………………………………………………………………………………..…..………12 6.3.1 Playing FM……………………………………………………………………………………..………12 6.3.2 Recording FM………………………………………………………………………………….………13 6.3.3 Setting FM……………………………………………………………………………………..………13 6.4 Function Setting…………………………………………………………………………………….………15 6.4.1 Setting EQ mode………………………………………………………………………………………15 6.4.2 Setting Play mode ……………………………………………………………………………….……15 6.4.3 Setting Contrast……………………………
Summary of the content on the page No. 4
7. Other function…………………………………………………………………………………….……………20 7.1 A-B play mode……………………………………………………………………….……………………20 7.2 Lock function………………………………………………………………………………………………21 7.3 Lyric sync……………………………………………………………………………………….….………21 8. FAQ………………………………………………………………………………………………………………22 9.Technical specifications……………………………………………………………...…………………………24 III
Summary of the content on the page No. 5
Notice: Thank you for choosing our products! Please read this manual carefully to ensure proper operation. Attention: 1. We are trying to perfect everything on this manual when we writing the description, however we cannot ensure there is not any miss or loss. 2. We take the responsibility to keep in good repair for this player, however we cannot take responsibility for everything damaged by software operation on mistakes, or even any data missing during product repaired or other mistakes.
Summary of the content on the page No. 6
1. Precautions (1) Never use the player during driving or operating other vehicles to avoid traffic accident, which is also restricted by the law in some districts. Even on foot, it is still dangerous to listen in extremely high volume especially during crossing the street. Wherever with potential risks, please stop using the player for safety purpose. (2) Please insert the earphone before powering on the player, which can not only avoid damaging the earphone but keep the player in good c
Summary of the content on the page No. 7
(8) As the software provided by the original equipment manufacturer has the optimum flash storage speed, all players with memory less than 128MB cannot be formatted as FAT-32 in the operating system. (9) Attention: Because of the different memory calculating method and the player software (firmware) is stored in the device flash memory and, it will cause the difference between flash memory marked capacity and real capacity. The real flash memory capacity is lesser than the marked memory ca
Summary of the content on the page No. 8
2. System requirement System requirement of MP3 player: Microsoft Windows 98se/2000/Me/XP Pentium 200MHZ or above. USB port 120MB hard disk space Mouse installed CD-ROM drive 4
Summary of the content on the page No. 9
3. Installation instruction 3.1Installing driver for Windows 98se (not required for Windows ME or above) A. Connect the MP3 Player to the USB port of a PC, "Find new hardware" appears on the screen, then click "Search latest driver for this device" and insert the driver CD into CD-ROM, and then click "Next". B. Select "Look in" to direct the installation directory to the "Drivers" files in the driver CD, then click Yes. C. PC will install the driver for Windows 98se automatically. 4
Summary of the content on the page No. 10
4.2 Download A. Copy the files from other device and paste them into this movable device.LCD screen may display relative icon when transmitting files between the Player and PC. Data transferring 4.3 Removing USB device A. Double click the Safely Remove Hardware icon in taskbar: B. From Safely Remove Hardware screen, highlight "USB Mass Storage Device" item. 6
Summary of the content on the page No. 11
C. Then click "Stop" button. "Stop a Hardware Device" window appears on the screen as shown in the picture below. D. Click “OK”. After the "Safe to Remove Hardware" window appears, the player can be disconnected from PC safely. Notice: Never unplug the USB cable when transmitting data with PC to avoid damaging the Player; after data transmitting, please do not disconnect the player from PC until "Device now be safely removed" appears; while using USB function, all o
Summary of the content on the page No. 12
5. Basic operation 5. 1 Buttons and functions (1) Microphone (2) Earphone jack (3) Hold (4) REC button (5) Next (6) VOL+ (7) Previous (8) VOL- (9) MENU button (10) Play/Pause/Stop (11) USB port 8
Summary of the content on the page No. 13
5.2 Power on/off From power off mode, press button to power the player on and enter the MP3 standby mode. Keep holding button 3 seconds to power off, the player will save the data and enter power off mode. MP3 standby mode Power off Importance：If the power is directly cut off in standby mode or play back process, all the data set can’t be saved! 5.3 Main menu setup From standby or playing mode, you can press the MENU button to enter the main men
Summary of the content on the page No. 14
6. How to use the MP3 player 6.1Playing music A. From MP3 standby mode, you can press the button to play MP3 music and press the button again to pause. To resume playing, please press the button the third time. Play Pause B. From play or pause mode, press and hold the button 2 seconds, the player will return to the MP3 standby mode, press and hold the button again, it will repeat step "A". C. From MP3 standby or play mode, you can push the
Summary of the content on the page No. 15
6.2 Voice mode 6.2.1Record function From MP3 mode or voice standby mode, keep pressing REC button to begin recording, press the button to pause recording. Repress the REC button to stop and save the voice file in wav format then come into the voice standby mode. 6.2.2 Play voice files You can press the button to play and press this button again to pause. To resume playing, please press this button a third time. 11
Summary of the content on the page No. 16
A. From voice standby or play mode, you can press the or button to select previous or next voice file. B. From STOP status, you can push and hold the or button to find your desired track quickly. C. From Play mode, you can push and hold or button to fast backward or forward in this track. D. From voice standby mode, press the button 3 seconds, player will enter the power off mode. 6.3 FM Tuner 6.3.1 Playing FM A. From MP3 playing, voice playing or standby mode
Summary of the content on the page No. 17
6.3.2 Recording FM From FM playing mode, you can keep pressing the REC button 2 seconds to begin recording. The FM track will be recorded in WAV format. Press the button to pause recording. Repress the REC button to finish recording and the player will return to the FM Tuner screen. You can play the FM recording files under the Voice mode. 6.3.3 Setting FM From FM playing mode, you can press the MENU button to enter the FM menu. Push the or button to select play music, voice,
Summary of the content on the page No. 18
C. Save station: Under the FM menu, push the or button to select save station and press the button to enter. Repress the button to confirm saving. D. Delete station: Under the FM menu, push the or button to select delete station and press the button to enter. Repress the button to confirm deleting. E. Auto scan: Under the FM menu, push the or button to select auto scan and press the button to begin scanning the stations automatically and playing under the neare
Summary of the content on the page No. 19
6.4 Function Setting From MP3 mode or voice standby mode, press the MENU button to enter the main menu, and push the or button to select and press the button to enter the desired mode. The function setting includes: EQ mode, Play mode, Contrast, Backlight, Power set, Record set, Language and Exit. You can press the button to save. 6.4.1 Setting EQ mode Under the setting mode. Push the or button to select the EQ mode: Normal, Pop, Rock, Classical, Jazz and Bass. Press t
Summary of the content on the page No. 20
6.4.3 Setting Contrast Under the setting mode. Push the or button to adjust the contrast of LCD. Press the button to save the selected setting. 6.4.4 Adjusting Backlight Under the setting mode. Push the or button to select the backlight setting, including: Off, 5s, 10s, on. Press the button to save the selected setting. 6.4.5 Setting Power set Under the setting mode. Push or button to select the Power set, including: 2m, 10m, 30m, off. Press the button to save the sel
