Walker Edison WQ60C73 WQ60C73TB user manual

Summary of the content on the page No. 1

Item #: WQ60C73
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 09/2010

Summary of the content on the page No. 2

General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hol

Summary of the content on the page No. 3

Parts List

Summary of the content on the page No. 4

Hardware List Wood dowel Cam bolt Cam lock Door stopper Medium screw Door stopper plate Small screw Handle Small bolt Door hinge Extra-large screw Shelf support pin Plastic wedge Large screw Large bolt Wrench Glue tube Sticker

Summary of the content on the page No. 5

Screw cam bolts (B) into stand top (1). Attach door stoppers (D) to stand top (1) using medium screws (E). Screw cam bolts (B) into panels (3,4,5,6). Insert dowels (A) into panels (3,4,5,6), slat (7) and shelves (9).

Summary of the content on the page No. 6

Screw cam bolts (B) into panels (14,15,17,18). Insert dowels (A) into panels (14,15,17,18) and shelves (12,13). Screw cam bolts (B) into panels (5,6) and slat (20). Insert dowels (A) into slats (20,22,23).

Summary of the content on the page No. 7

Attach slats (22,23) to slat (20) using cam bolts as guides. Insert cam locks (C) into slats (22,23) and tighten with a screwdriver. Screw cam bolts (B) into panels (16,19). Attach handles (H) to panels (16,19) using small bolts (J). Attach door stopper plates (F) to panels (16,19) using small screws (G).

Summary of the content on the page No. 8

Attach panels (14,15) to shelves (12,13) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (12,13) and tighten with a screwdriver. Note that two cam locks (C) will be inserted into each shelf (12,13). Attach panels (17,18) to shelves (12,13) using cam bolts and dowels as guides. Insert cam locks (C) into shelves (12,13) and tighten with a screwdriver. Note that two cam locks (C) will be inserted into each shelf (12,13).

Summary of the content on the page No. 9

Attach the panel (14,15) assembly to panel (16) using cam bolts and dowels as guides. Insert cam locks (C) into panels (14,15) and tighten with a screwdriver. Attach the panel (17,18) assembly to panel (19) using cam bolts and dowels as guides. Insert cam locks (C) into panels (17,18) and tighten with a screwdriver.

Summary of the content on the page No. 10

Attach panels (5,6) to slat (7) using cam bolts and dowels as guides. Insert cam locks (C) into slat (7) and tighten with a screwdriver. Attach shelf (9) to the panel (5,6) assembly, then attach panel (3) to shelf (9) using cam bolts and dowels as guides. Insert cam locks (C) into shelf (9) and tighten with a screwdriver.

Summary of the content on the page No. 11

Attach shelf (9) to the panel (5,6) assembly, then attach panel (4) to shelf (9) using cam bolts and dowels as guides. Insert cam locks (C) into shelf (9) and tighten with a screwdriver. Attach the panel (3,4,5,6) assembly to stand top (1) using cam bolts and dowels as guides. Insert cam locks (C) into panels (3,4,5,6) and tighten with a screwdriver. Note that two cam locks (C) will be inserted into each panel (3,4,5,6).

Summary of the content on the page No. 12

Slide back panels (10,11) into the appropriate grooves at the back of the stand assembly. Attach feet (21) to stand base (2) using large bolts (Q) and wrench (R).

Summary of the content on the page No. 13

Attach stand base (2) to the stand assembly using large bolts (Q) and wrench (R). Attach the slat (20,22,23) assembly to stand base (2) using cam bolts and dowels as guides.

Summary of the content on the page No. 14

Attach door hinges (K) to panels (15,17) using extra-large screws (L). Attach the panel (14,15) assembly to the stand assembly at door hinges (K) using extra-large screws (L).

Summary of the content on the page No. 15

Attach the panel (17,18) assembly to the stand assembly at door hinges (K) using extra-large screws (L). Insert shelf support pins (M) into the stand assembly at desired shelf heights. Carefully place shelves (8) onto shelf support pins (M). Note that there will be two shelf support pins (M) on either end of each shelf (8).

Summary of the content on the page No. 16

Secure back panels (10,11) using plastic wedges (N) and large screws (P).