Walker Edison 44" Columbus TV Console WQ44CMPTB user manual

Summary of the content on the page No. 1

Item #: WQ44CMP
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 09/2010

Summary of the content on the page No. 2

General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The four main types of hardware used to assemble this product are: wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate hol

Summary of the content on the page No. 3

Parts List

Summary of the content on the page No. 4

Hardware List Wood dowel Cam bolt Large cam lock Small cam lock Large bolt Small bolt Handle Large screw Small screw Plastic wedge Wrench Glue tube Sticker The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included.

Summary of the content on the page No. 5

Screw cam bolts (B) into stand top (1). Insert dowels (A) into shelves (9), stand base (2) and drawer divider (4).

Summary of the content on the page No. 6

Screw cam bolts (B) into drawer pieces (5,6,7,8). Insert dowels (A) into drawer pieces (5,6,7,8). Attach feet (10) and stand support (11) to stand base (3) using large bolts (E) and wrench (L).

Summary of the content on the page No. 7

Screw cam bolts (B) into stand base (3). Attach panels (5,6) to panel (2) using cam bolts and dowels as guides. Insert large cam locks (C) into panel (2) and tighten with a screwdriver.

Summary of the content on the page No. 8

Attach drawer divider (4) to the assembly from the previous step using dowels as guides. Slide back panel (13) into the grooves of the assembly. Attach the assembly from the previous step to stand base (3) using cam bolts and dowels as guides.

Summary of the content on the page No. 9

Insert large cam locks (C) into panels (5,6) and tighten with a screwdriver. Attach panels (7,8) to shelf (9) using cam bolts and dowels as guides. Insert large cam locks (C) into panel (9) and tighten with a screwdriver. Repeat this step for second set of panels (7,8,9).

Summary of the content on the page No. 10

Attach the first panel (7,8,9) assembly to the stand assembly. Ensure that panel (7) faces forward. Insert large cam locks (C) into panels (7,8) and tighten with a screwdriver. Attach the second panel (7,8,9) assembly to the stand assembly. Ensure that panel (7) faces forward. Insert large cam locks (C) into panels (7,8) and tighten with a screwdriver.

Summary of the content on the page No. 11

Slide back panel (12) into the grooves of the stand assembly. Insert large cam locks (C) into the stand assembly. Attach stand top (1) to the stand assembly using cam bolts and dowels as guides. Tighten large cam locks (C) with a screwdriver.

Summary of the content on the page No. 12

Cover all visible cam locks with stickers (N) as desired. Screw cam bolts (B) into drawer fronts (18,19). Attach handles (G) to drawer fronts (18,19) using small bolts (F).

Summary of the content on the page No. 13

Attach drawer sides (15,16) to drawer back (14) using large screws (H). Slide drawer bottom (17) into the grooves of the drawer assembly. Repeat this step for the second drawer. Attach drawer front (18) to the first drawer assembly using cam bolts as guides. Insert small cam locks (D) into drawer sides (15,16) and tighten with a screwdriver.

Summary of the content on the page No. 14

Attach drawer front (19) to the second drawer assembly using cam bolts as guides. Insert small cam locks (D) into drawer sides (15,16) and tighten with a screwdriver. Carefully slide drawers into the stand assembly.

Summary of the content on the page No. 15

Secure back panels (12,13) using plastic wedges (K) and small screws (J).