Краткое содержание страницы № 1
P2WW-2410-01ENZ0
How to use ScandAll PRO
Краткое содержание страницы № 2
Краткое содержание страницы № 3
CONTENTS Chapter 1 LAUNCHING AND SETTINGS ................................ 1 1.1 Launching ScandAll PRO .................................................. 2 1.2 Selecting a Scanner Driver ................................................ 3 1.3 Selecting a Scanner............................................................ 4 1.4 How to Display the Scanner Driver Setup Dialog Box .... 5 Chapter 2 HOW TO SCAN DOCUMENTS ............................... 7 2.1 Scan.....................................
Краткое содержание страницы № 4
INTRODUCTION Thank you for using ScandAll PRO. ScandAll PRO is application software to show the list of images scanned with the FUJITSU fi-series image scanner and edit those images. ScandAll PRO has the following features: • Both TWAIN/ISIS standards are supported. • Scanning condition, file format, and destination to save the file can be specified before scanning by batch process. (The settings can be saved as profiles.) • Scanned image data can be edited by such as rotation/reversion/deske
Краткое содержание страницы № 5
Use in High-safety Applications This product has been designed and manufactured on the assumption that it will be used in office, personal, domestic, regular industrial, and general-purpose applications. It has not been designed and manufactured for use in applications (simply called "high-safety applications" from here on) that directly involve danger to life and health when a high degree of safety is required, for example, in the control of nuclear reactions at nuclear power facilities, au
Краткое содержание страницы № 6
Regulatory Information Symbols Used In This Manual This symbol alerts operators to particularly important information. Be ATTENTION sure to read this information. This symbol alerts operators to helpful advice regarding operation. HINT Screen Examples In This Manual The screen examples in this manual are subject to change without notice in the interest of product improvement. If the actual displayed screen differs from the screen examples in this manual, operate by following the actual displa
Краткое содержание страницы № 7
Chapter 1 1 LAUNCHING AND SETTINGS This chapter describes how to launch and set ScandAll PRO. In this chapter Windows XP screenshots are illustrated. The screens and operations may differ slightly depending on the operating system (OS) or the scanner model used. Also, when the FUJITSU TWAIN32 or FUJITSU ISIS scanner driver is updated the screens and operations noted in this chapter will differ slightly. In such case, refer to the relevant manuals or materials, which are to be supplied when u
Краткое содержание страницы № 8
1.1 Launching ScandAll PRO This section describes how to launch ScandAll PRO. 1. From the [Start] menu, select [All Programs] [Fujitsu ScandAll PRO] [Fujitsu ScandAll PRO]. ⇒ ScandAll PRO starts up. 2
Краткое содержание страницы № 9
LAUNCHING AND SETTINGS 1.2 Selecting a Scanner Driver 1.2 Selecting a Scanner Driver ScandAll PRO supports both TWAIN and ISIS standards and allows you to invoke either the TWAIN driver or the ISIS driver for scanning images with the scanner. This scanner comes with two drivers, FUJITSU TWAIN 32 Scanner Driver and FUJITSU ISIS Scanner Driver, which you 1 can use with this scanner. The following explains how to select a scanner driver with ScandAll PRO (how to switch between the FUJITSU TWAIN
Краткое содержание страницы № 10
1.3 Selecting a Scanner To scan documents with a scanner, you have to select its name from the list beforehand. The following explains how to select a scanner to use. 1. From the [Scan] menu, select [Select Scanner]. 2. Select a scanner you want to use. Select a scanner you want to use and click the [Select] button. FUJITSU ISIS FUJITSU TWAIN 32 4
Краткое содержание страницы № 11
LAUNCHING AND SETTINGS 1.4 How to Display the Scanner Driver Setup Dialog Box 1.4 How to Display the Scanner Driver Setup Dialog Box You can configure settings for scanning documents with the selected scanner in the setup dialog 1 box of a scanner driver. Select the [Scan] menu, and then select [Setting] to display the setup dialog box. For information about setting items you can configure, refer to the section on the scanner driver settings in the Operator's Guide provided with the scanner.
Краткое содержание страницы № 12
6
Краткое содержание страницы № 13
Chapter 2 HOW TO SCAN DOCUMENTS 2 This section describes how to scan documents with ScandAll PRO. In this chapter Windows XP screenshots are illustrated. The screens and operations may differ slightly depending on the operating system (OS) or the scanner model used. Also, when the FUJITSU TWAIN32 or FUJITSU ISIS scanner driver is updated the screens and operations noted in this chapter will differ slightly. In such case, refer to the relevant manuals or materials, which are to be supplied wh
Краткое содержание страницы № 14
2.1 Scan In this section, the scanning condition, such as file format, save-in folder or other scanning option, is specified before each scanning. 1. Place the document on the scanner. 2. From the [Scan] menu, select [Scan Settings]. Or, select the [Scan Settings] button ( ) on the toolbar. For launching ScandAll PRO, refer to "1.1 Launching ScandAll PRO" HINT ⇒ The [Scan Settings] dialog box appears. 3. In the [Scan Settings] dialog box, configure various settings for saving scanned docume
Краткое содержание страницы № 15
HOW TO SCAN DOCUMENTS 2.1 Scan 2 [Save to file] Checkbox To save scanned document images immediately after scanning, mark this checkbox. If you want to verify scans before saving them to file, clear this checkbox. Folder Name You can specify a folder to save scanned document images. Type in a full path in the box or click the [Browse] button to select a desired folder. File Name A file name used to save scanned document image files is displayed. When you want to use the name rule for file names,
Краткое содержание страницы № 16
Compression You can select how to compress files to save. Document When scanning a document containing more than one page, you can specify whether to create one file containing all pages or to divide into files each containing the specified number of pages. This becomes selectable only when a multi-page format is selected. File Overwrite Warning You can select whether to receive a confirmation message when scanned document image files with the same names already exist in the destination folde
Краткое содержание страницы № 17
HOW TO SCAN DOCUMENTS 2.1 Scan 2 FUJITSU ISIS FUJITSU TWAIN 32 6. When you finished setting, click the [OK] button in the dialog box (FUJITSU TWAIN 32 Scanner Driver/ FUJITSU ISIS Scanner Driver). ⇒ You are returned to the [Scan Setting] dialog box. 7. Click the [Scan] button. When you use the FUJITSU TWAIN 32 Scanner Driver, clicking the [Scan] HINT button may display the scanner driver’s setup dialog box. If so, you can also change settings in the dialog box displayed. Click the [Scan] but
Краткое содержание страницы № 18
• If you do not mark the [Save to file] checkbox in the [Scan Settings] dialog HINT box, scanned document images are not saved. To save the files, from the [File] menu, select [Save As]. • To scan the next document with the same settings, from the [Scan] menu, select [Scan]. Or, click the [Scan] button ( ) on the toolbar. For the scanning operations other than described above, refer to "2.2 Batch Scan" and "Chapter3 SCANNING VARIOUS TYPES OF DOCUMENTS". For information about the feature
Краткое содержание страницы № 19
HOW TO SCAN DOCUMENTS 2.2 Batch Scan 2.2 Batch Scan You can save various settings as profiles beforehand. Batch Scan allows you to scan documents by using those profiles. 2.2.1 Creating/Editing Profiles Creating, editing and deleting profiles are described as follows. 2 1. From the [Scan] menu, select [Batch Scan Settings]. Or, click the [Batch Scan Settings] button ( ) on the toolbar. For launching ScandAll PRO, refer to "1.1 Launching ScandAll PRO" HINT ⇒ The [Batch Scan Setting] dialog box
Краткое содержание страницы № 20
2. Do the following as necessary: • To create a new profile: Click the [Add] button. ⇒ A new profile appears in the [Profile Editor] dialog box. (Go to step 3.) • To create a new profile based on an existing profile: Select a profile you want to use as the basis from the profile list, and then click the [Copy] button. ⇒ A new profile based on the selected profile appears in the [Profile Editor] dialog box. (Go to step 3.) • To change the settings of an existing profile: Select a profile you w
