Краткое содержание страницы № 1
RC90
Ceramic Hob
User Guide
&
Installation & Service Instructions
U109917 - 02
Краткое содержание страницы № 2
Contents Before You Start... 1 Ceramic Hob Overview 3 Cleaning Your Hob 8 Troubleshooting 9 Installation 10 Circuit Diagram 13 Technical Data 14 Warranty/After Sales Service 15
Краткое содержание страницы № 3
DocNo.012-0001 - Introduction - BI hob ceramic 1. Before You Start... Thank you for buying a Rangemaster hob. It should give you Never operate the hob with wet hands. many years trouble-free cooking if installed and operated Never heat unopened food containers. Pressure correctly. It is important that you read this section before you build up may make the containers burst and cause start, particularly if you have not used a ceramic hob before. injury. This appliance is designed for do
Краткое содержание страницы № 4
Hob Care Cleaning Never cook directly on the hob surface. The ceramic surface should be washed after use in order to prevent it from becoming scratched or dirty. Do not use the hob surface as a cutting board. In the interests of hygiene and safety, the hob should be kept Do not leave utensils, foodstuffs or combustible items on clean at all times as a build up in fats and other foodstuffs the hob when it is not is use (e.g. tea towels, frying pans could result in a fire. containing oil). Clean
Краткое содержание страницы № 5
2. Hob Overview � ������������� �������������� � ������������� Fig.2-1 ����� �������������� �� ������� ������������ �� ������� ����� �������������� �� �������� � �� �� �������������� �� ������� � ������������������� �� �������� � �� �� �������������� �� ������� ArtNo.315-0001 90 Ceramic hob � ������������� � � ���� ��� �������������� � ������������� ������������ �� ������� ����� �������������� �� ������� � �� �� �������������� �� ������� The ceramic hob comprises of five cooking zones containing
Краткое содержание страницы № 6
Fig.2-5 � � � � � � � � � � ArtNo.315-0016 RC90 control panel � � �� � � � �� � 1. Power ON/Power OFF 5. Dual element selector key 7. Timer key 11. Child lock key 2. Cooking element ‘+’ key (Indicator light above) 8. Timer ‘+’ key (Indicator light above) 3. Cooking element ‘–’ key 6. Triple element selector key 9. Timer ‘–’ key 4. Cooking zone digital display (Indicator lights above) 10. Timer digital display pans wastes heat, and any spillage will be burnt on. Using a Fig.2-6 lid will
Краткое содержание страницы № 7
Note: The ‘+’ and ‘–‘ keys have a repeat function: holding a key Fig.2-9 pressed down will increase or decrease the power setting by one level every 0.3 seconds. To shutdown a cooking zone: Press the relevant ‘–‘ key to reduce the power to 0. Rapid shutdown: ArtNo.315-0021 RC90 Rapid shutdown To quickly switch off a selected zone press the ‘+’ and ‘–‘ keys simultaneously: this will immediately switch off that zone (Fig.2-9). Fig.2-10 Note: After a zone has been switched off an ‘H’ may appear in
Краткое содержание страницы № 8
Timer Function Fig.2-14 � ��� ����� ��������� � �� The timer has two settings: • Zone timer • Minute timer ArtNo.315-0026 RC90 Setting the zone timer Zone timer This allows any one of the cooking zones to be programmed to cook up to a maximum of 99 minutes at a set power level. At the end of the cooking time an alarm will sound and the zone will automatically turn off. � ������ �� Note: The timer function can only be assigned to one of the cooking zones at a time. Activating the timer: Fig.2-
Краткое содержание страницы № 9
Deactivating the timer: � � � ����� � �� �� �� ����������� Press and hold the timer key. The timer display will reset to � �������� ‘00’ and after a few seconds go out. � ������� � ������� Child Lock Function � �������� � ������� IMPORTANT: Make sure that all cooking zones are switched � ������� off before operating the child lock. If the lock is operated � ������� when any cooking zones are active they will remain on. Any � ������� active zones can be turned off by pressing the ‘+’ and ‘–‘ �
Краткое содержание страницы № 10
DocNo.042-0001 - Cleaning - BI hob ceramic 3. Cleaning Your Hob Essential information Cleaning burned-on spills Allow the hob to cool and isolate the electricity supply before Make sure that the residual heat indicators are off and that carrying out any thorough cleaning. the hob is cool. Remove the excess burned-on substance with a single-edged razor scraper. Hold the scraper at an angle of Never use paint solvents, washing soda, caustic cleaners, about 30° to the surface and then scrape off
Краткое содержание страницы № 11
DocNo.052-0001 - Troubleshooting ceramic & induction 4. Troubleshooting If there is an installation problem and I don’t get my original installer to come back to fix it, who pays? You do. Service organisations will charge for their call- outs if they are correcting work carried out by your original installer. Therefore, it’s in your own interest to keep track of this installer so that you can contact them as required. A crack has appeared in the hob surface. Isolate the hob immediately from
Краткое содержание страницы № 12
INSTALLATION Check the appliance is electrically safe when you have finished. 5. Installation Dear Installer Location of the Hob Before you start your installation, please complete the details The hob may be installed in a kitchen/kitchen diner but NOT BELOW. in a room containing a bath or shower. Should your customer have a problem relating to your This appliance is designed for domestic cooking only. Use for installation they will be able to contact you easily. any other purpose could invalid
Краткое содержание страницы № 13
INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob Fig.5-1 The hob should be fitted into a work surface, which is at least ������ ��� 600mm deep. In position, it has a maximum thickness of 5mm ���� from the top of the work surface. The cut-out dimensions are shown in (Fig.5-1) and the minimum clearances in (Fig.5-2). The minimum recommended distances from the hob to nearby surfaces are shown in (Fig.5-3). ����� ����� ��������� *Any hob hood shoul
Краткое содержание страницы № 14
INSTALLATION Check the appliance is electrically safe when you have finished. Electrical Connections Fig.5-4 ��� This appliance must be installed by a qualified electrician � ���� �� to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity ����� supply company requirements. WARNING: THIS APPLIANCE MUST BE EARTHED ����� � Note: All external wiring must comply with the IEE Regulations for the Electrical Equipment of Buildings. Connecti
Краткое содержание страницы № 15
���� ���� ���� ���� ������ � ����� ������ � ����� ����� ����� ����� ����� ����� ����� ������� ������ 6. Circuit Diagram � � � � � � � � � � �� �� � �� � � � � ����� � � ���� � � � ���� � � � � � �� � �� � � � � ���� � � � �� �� ���� � �� � ��� �� �� � � �� �� � �� � �� � �� � � � � � �� � � � � � � � ���� � � �� � ���� � �� � ��� �� �� �� �� �� �� �� � � �� �� �� �� �� �� �� �� �� � �� � ������� ��� � �� ���� ��� �� � �� ArtNo.080-0011 - RC90 circuit diagram ��� ����� � ��� �� ���� � �� � �� � �
Краткое содержание страницы № 16
DocNo.102-0003 - Technical data - RC90 7. Technical Data INSTALLER: Please leave these instructions with the user. DATA BADGE LOCATION: Base of the hob. COUNTRY OF DESTINATION: GB/IE Dimensions 45mm; Above worktop 5mm; Overall height (65mm including connection box) Below worktop 40mm Overall width 900mm; see ‘Positioning of the Hob’ Overall depth 510mm Space for fixing See ‘Positioning of the Hob’ Minimum space above hotplate 600mm Connections Electric 220 – 240V 50Hz Ratings Maximum total e
Краткое содержание страницы № 17
DocNo.111-0001 Warranty 8. Warranty/After Sales Service If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported within 90 days of delivery. For in-warranty service please call: 0845 6035312. For general enquiries please
Краткое содержание страницы № 18
16
Краткое содержание страницы № 19
17
Краткое содержание страницы № 20
DocNo.000-0001 - Back cover Rangemaster � � �� � ����������� �������� ������� ������� �� w w w . r a n g e m a s t e r . c o . u k ArtNo.000-0003 CE logo