Краткое содержание страницы № 1
BeoCom 6000
Guide
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Before you start … 3 This Guide contains instructions in how to set up and use the BeoCom 6000 handset with a BeoLine base. You can also use the handset with other bases, such as a BeoCom 6000 base, a BeoLine PSTN base, or a BeoLine ISDN base. However, note that some functions work differently or are unavailable when you use the handset with one of these bases. Differences are described in this Guide.
Краткое содержание страницы № 4
4
Краткое содержание страницы № 5
Contents 5 Get started, 6 Find out how to connect and set up BeoCom 6000, use the handset keys *NOTE! This is only possible if you and the display. You can also find information about maintenance and use the handset with the BeoLine accessories available from your Bang & Olufsen retailer. base. Daily use, 18 Find out how to make and answer calls, adjust the handset volume, make calls from the Phonebook, Caller ID and Redial lists, store a number in the Phonebook after a call, silence the
Краткое содержание страницы № 6
6 Get started Charge the handset battery When getting started, follow this If the handset requires charging, this occurs automatically when procedure: the handset is placed in the charger. For safety reasons, the 1 Connect the charger to the battery is not charged prior to shipping. We recommend that you power outlet as described in the charge the handset for at least one hour before proceeding charger’s Guide further with first-time registration of the handset. 2 Charge the handset batte
Краткое содержание страницы № 7
7 Replace the battery > Remove the battery cover; press the cover lightly and slide it off. > Remove the battery and pull out the battery plug. > Insert the battery plug (A) and place the battery and the cords as shown. > Replace the battery cover. Make sure that the tabs and the slots snap into place correctly at the top and bottom of the cover. A Placement and surroundings The phone must not be placed in damp, dusty or polluted surroundings and should not be exposed to direct sunlight
Краткое содержание страницы № 8
8 >> Get started First-time registration of the handset to a base For the base and the handset to be able to communicate, the handset must be registered to a base. Up to eight handsets can be registered to the same base*. You can not register a handset to more than one base. > Disconnect the base from the mains for at least two seconds and then reconnect it. The indicator light flashes, and the base is open for registration for five minutes. Indicator light When your base is open for r
Краткое содержание страницы № 9
9 Press to switch on the handset. Register handset OK to base? is shown in the display Register handset to base? Press OK. The handset searches for an open base OK When a base is located, the PARK number* for Base 01/02 the base is shown. Check the number against 36-000077123456 the number on the base If the numbers do not match, turn the wheel to view the available bases. If your base is not Base 02/02 shown, open the base for registration once more 36-000077234567 and
Краткое содержание страницы № 10
10 >> Get started Name the handset You can name the handset, for When registration is complete, the display prompts you to name example, after the room in which it the handset. This is practical if you have more than one handset. is placed, or after the person who You can enter this setting at a later date, if you wish. uses it most frequently. The display prompts you to enter a name Enter handset The functions described on these name? pages are also accessible via the Settings menu.
Краткое содержание страницы № 11
11 Set the time and date After you have registered the first handset and named it, the *You can register additional display prompts you to set the time and date. The time is shown handsets in this way only if you use when the phone is not in use and when there is no new the handset with the BeoLine base. information in the display. Time and date are also shown with Caller ID and Redial information. Set clock? is shown Set clock? Press OK to be able to set the clock, or press C if OK you wi
Краткое содержание страницы № 12
R 12 >> Get started Handset keys CALLER ID Access the Caller ID list Press to make and end a call . REDIAL A V Access the Redial list Press to be able to adjust the volume of Bang & Olufsen audio PHONEBOOK and video systems 1: Access the Phonebook. Also used 09:51 20 Jan for storing names and numbers in INT CALLER ID REDIAL PHONEBOOK the Phonebook Press to be able to call an internal handset. You can then look through the list of handsets with Turn the wheel to search in Phone
Краткое содержание страницы № 13
13 Phone feedback – indicator lights Indicator light on the handset The indicator light flashes red when… – The phone is off the hook – The phone rings – Unanswered calls are registered Indicator light – Conditions exist which affect or impede the optimal use of your phone. Refer to page 15 for more information. You can turn off the handset indication of unanswered calls. The indicator light shines green when the handset is in the charger and Refer to the chapter ‘Preference none of th
Краткое содержание страницы № 14
14 >> Get started The handset display 98765432 Open the display … Call? > Press OK while the handset is in standby. A black arrow indicates that more > Turn the wheel to view options in the display. options are available if you turn > Press OK to select an option. the wheel – clockwise for right, and counter-clockwise for left. A Options in the main menu grey arrow indicates that no more – Lock keypad?… Lock the handset keypad. Refer to page 19. options are available. –
Краткое содержание страницы № 15
15 Troubleshooting via the display – the Alert menu Other messages in standby: If conditions exist which impede or otherwise affect the optimal use of Register your phone, Alert appears in the display while the handset is in standby handset to base? and remains as long as the conditions apply. The handset is not registered to a base. Press OK to start the first- ‘Alert’ appears in the display … time setup procedure. > Press OK to be able to view the cause of the alert > Turn the wheel to see
Краткое содержание страницы № 16
CLICK CLICK 16 >> Get started Attach the clip With the clip you can attach the handset to your pocket. Attach 2 the clip on the back of the handset: 1 To attach the clip … > Slide the two flaps down along the two grooves on the sides of the B handset. > When the clip is positioned correctly, approximately 4.5 cm from the top of the handset, it will click into place. Make sure the clip is firmly attached on both sides of the handset. To remove the clip … > Pull the left flap (B) out to
Краткое содержание страницы № 17
17
Краткое содержание страницы № 18
18 Daily use Make and answer calls If you end a call to or from a The key on the BeoCom 6000 is used to start and end a call. number not previously stored in During the call, the phone displays the duration of the call and the the Phonebook, the display number or name of the person called. If you do not wish to answer prompts you to do so. Refer to a call, you can mute the ringing signal. Store a number after a call on page 22 for more information. To make a call … Enter the telephone n
Краткое содержание страницы № 19
19 Lock the handset keypad You can lock the handset keypad to avoid pressing keys when, for You can also lock the handset key example, you carry the handset in a pocket. If you lock the hand- pad by pressing and holding the set keypad, you can still answer calls, but you have to unlock the button. key pad to make a call. You can set the handset to lock To lock the handset keypad … automatically when not in use. You Press while the handset is in standby OK activate and deactivate this fun
Краткое содержание страницы № 20
20 >> Daily use Silence the handset ringer and battery alert You can silence the handset ringer if you do not want to be disturbed. While the handset is silenced, the ringer is deactivated, but incoming calls are still registered in the New calls menu, as described on page 14. To silence the handset ringer … Press to bring up the main menu OK Turn the wheel until Silence? is shown and press OK. Silence selected appears briefly in the Silence? display, and this changes to Si
