Краткое содержание страницы № 1
915GM-MIGF
System Board
User’s Manual
91300607
Краткое содержание страницы № 2
Copyright This publication contains information that is protected by copyright. No part of it may be reproduced in any form or by any means or used to make any transformation/adaptation without the prior writ- ten permission from the copyright holders. This publication is provided for informational purposes only. The manufacturer makes no representations or warranties with respect to the contents or use of this manual and specifically disclaims any ex- press or implied warranties of merchantabi
Краткое содержание страницы № 3
FCC and DOC Statement on Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio fre- quency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to ra
Краткое содержание страницы № 4
Table of Contents About this Manual................................................................................ 5 Warranty................................................................................................. 5 Static Electricity Precaution................................................................ 6 Safety Measures..................................................................................... 6 About the Package..........................................................
Краткое содержание страницы № 5
About this Manual This user’s manual contains detailed information about the system board. If, in some cases, some information doesn’t match those shown in the multilingual manual, the multilingual manual should al- ways be regarded as the most updated version. The multilingual manual is included in the system board package. Warranty 1. Warranty does not cover damages or failures that arised from misuse of the product, inability to use the product, unauthorized replacement or alteration of compo
Краткое содержание страницы № 6
1 Introduction Static Electricity Precautions It is quite easy to inadvertently damage your PC, system board, components or devices even before installing them in your system unit. Static electrical discharge can damage computer components without causing any signs of physical damage. You must take extra care in handling them to ensure against electrostatic build-up. 1. To prevent electrostatic build-up, leave the system board in its anti-static bag until you are ready to install it. 2. Wear an
Краткое содержание страницы № 7
1 Introduction About the Package The system board package contains the following items. If any of these items are missing or damaged, please contact your dealer or sales representative for assistance. The system board A user’s manual One IDE cable One floppy cable One Serial ATA data cable One Serial ATA power cable One “Main Board Utility” CD One I/O shield The system board and accessories in the package may not come similar to the information listed above. This may differ in accordance
Краткое содержание страницы № 8
1 Introduction Chapter 1 - Introduction Specifications ® ® Processor Intel Pentium M Dothan processor - 533MHz/400MHz system data bus ® ® Intel Celeron M processor - 400MHz system data bus Processor socket: mPGA479M ® Chipset Intel chipset ® - North bridge: Intel 915GM Express chipset ® - South bridge: Intel ICH6M System Memory Two 184-pin DDR SDRAM DIMM sockets Supports single channel (64-bit wide) memory interface Unbuffered PC2700 (DDR333) or PC3200 (DDR400) DDR SDRAM DIMM Supports maximum of
Краткое содержание страницы № 9
1 Introduction Audio Realtek ALC850 True stereo line level outputs S/PDIF-in/out interface 8-channel audio output LAN RTL8110SB Gigabit ethernet controller Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE- TX) and 802.3ab (1000BASE-T) standards IDE Supports up to UltraDMA 100Mbps IDE devices Serial ATA Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0 specification (1.5Gbps interface) IEEE 1394 VIA VT6307 Supports two 100/200/400 Mb/sec ports Rear Panel I/O 1
Краткое содержание страницы № 10
1 Introduction Features PCI Express is a high bandwidth I/O infrastructure that possesses the ability to scale speeds by forming multiple lanes. The system board currently supports the physical layer of x1 and x16 lane widths. The x1 PCI Express lane supports transfer rate of 2.5 Gigabytes (250MBbps) per sec- ond. The PCI Express architecture also provides a high performance graphics infrastructure by enhancing the capability of a x16 PCI Ex- press lane to provide 4 Gigabytes per second transfer
Краткое содержание страницы № 11
1 Introduction The onboard Realtek ALC850 which is an AC’97 com- patible audio codec and the 6 audio jacks at the rear I/O panel provides 8-channel audio output for advanced 7.1-channel super surround sound audio system. ALC850 also supports S/PDIF input and output, allow- ing digital connections with DVD systems or other audio/video mul- timedia. S/PDIF is a standard audio file transfer format that trans- fers digital audio signals to a device without having to be converted first to an analog f
Краткое содержание страницы № 12
1 Introduction The system board is equipped with an IrDA connector IrDA for wireless connectivity between your computer and peripheral devices. The IRDA (Infrared Data Association) specification supports data transfers of 115K baud at a distance of 1 meter. The system board supports USB 2.0 and USB 1.1 ports. USB 1.1 supports 12Mb/second bandwidth while USB 2.0 supports 480Mb/second bandwidth providing a marked improvement in device transfer speeds between your computer and a wide range of simul
Краткое содержание страницы № 13
1 Introduction This function allows you to use a USB key- Wake-On-USB board or USB mouse to wake up a system from the S3 (STR - Suspend To RAM) state. Important: If you are using the Wake-On-USB Keyboard/Mouse function for 2 USB ports, the 5VSB power source of your power supply must support ≥1.5A. For 3 or more USB ports, the 5VSB power source of your power supply must support ≥2A. The system board is designed to meet the ACPI (Ad- ACPI vanced Configuration and Power Interface) specification. AC
Краткое содержание страницы № 14
2 Hardware Installation Chapter 2 - Hardware Installation System Board Layout 14
Краткое содержание страницы № 15
2 Hardware Installation . . . Warning: . . . . . Electrostatic discharge (ESD) can damage your system board, proces- sor, disk drives, add-in boards, and other components. Perform the upgrade instruction procedures described at an ESD workstation only. If such a station is not available, you can provide some ESD protec- tion by wearing an antistatic wrist strap and attaching it to a metal part of the system chassis. If a wrist strap is unavailable, establish and maintain contact with the system
Краткое содержание страницы № 16
2 Hardware Installation BIOS Setting Configure the system memory in the Advanced Chipset Features submenu of the BIOS. Installing the DIM Module A DIM module simply snaps into a DIMM socket on the system board. Pin 1 of the DIM module must correspond with Pin 1 of the socket. Notch Key Tab Tab Pin 1 1. Pull the “tabs” which are at the ends of the socket to the side. 2. Position the DIMM above the socket with the “notch” in the module aligned with the “key” on the socket. 3. Seat the module verti
Краткое содержание страницы № 17
2 Hardware Installation CPU Overview The system board is equipped with a surface mount mPGA479M (Socket 479) CPU socket. This socket is exclusively designed for in- ® ® ® stalling an Intel Pentium M / Celeron M processor. Installing the CPU 1. Make sure the PC and all other peripheral devices connected to it has been powered down. 2. Disconnect all power cords and cables. 3. Locate the 479-pin CPU socket on the system board. 4. Use a screwdriver to turn the screw to its unlock position. Lock Un
Краткое содержание страницы № 18
2 Hardware Installation 5. Position the CPU above the socket. The gold triangular mark on the CPU must align with pin 1 of the CPU socket. Important: Handle the CPU by its edges and avoid touching the pins. Pin 1 of the socket Gold triangular mark 6. Insert the CPU into the socket until it is seated in place. The CPU will fit in only one orientation and can easily be inserted without exerting any force. Use a screwdriver to turn the screw to its lock position. Important: Do not force the CPU int
Краткое содержание страницы № 19
2 Hardware Installation Installing the Fan and Heat Sink The CPU must be kept cool by using a CPU fan with heat sink. Without sufficient air circulation across the CPU and heat sink, the CPU will overheat damaging both the CPU and system board. Note: • Use only the fan and heat sink assembly included in the system board package. • The fan and heat sink package contains the fan and heat sink assembly, and a retension module base. CPU fan and Retention heat sink assembly module base 1. Match and i
Краткое содержание страницы № 20
2 Hardware Installation 2. Place the heat sink on top of the CPU. The 4 screws around the heat sink must match the screw holes of the retention module base. Refer to the figure below for the correct position of the heat sink. This is important so that the fan / heat sink will pro- vide adequate cooling to the components of the system board. Turn each Phillips head screw half way down first to initially stabi- lize the heat sink onto the system board, then finally tighten each screw. Important: D
