Краткое содержание страницы № 1
Dell™ IN1940MW Monitor
Use'r Guide
Setting the display resolution to 1440 x 900 (Maximum)
Information in this document is subject to change without notice.
© 2012 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in
Краткое содержание страницы № 2
Dell ™ IN1940MW Monitor User's Guide About Your Monitor Setting Up Your Monitor Operating Your Monitor Troubleshooting Appendix Notes,Cautions,Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Information in this document is subject to change witho
Краткое содержание страницы № 3
Back to Contents Page About Your Monitor Dell™ IN1940MW Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability LCD Monitor Quality and Pixel Policy Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your Monitor. Some features or me
Краткое содержание страницы № 4
Stand Riser Stand Base Power Cable VGA Cable Drivers and Documentation media Quick Setup Guide Safety Information
Краткое содержание страницы № 5
Product Features The Dell™ IN1940MW display has an active matrix, thin-film transistor (TFT), liquid-crystal display (LCD). The monitor features include: ¦ 48.26 cm (19.0 inches) viewable area display. ¦ 1440 x 900 resolution plus full-screen support for lower resolutions. ¦ Tilt adjustment capabilities. ¦ Removable stand and Video Electronics Standards Association (VESA®) 100 mm mounting holes for flexible mounting solutions. ¦ Plug and play capability, if supported by your computer. ¦ On-Scree
Краткое содержание страницы № 6
Identifying Parts and Controls Front View Front Panel Controls Label Description Function buttons (For more information, see Operating 1 the Monitor) 2 Power On/Off button (with LED indicator)
Краткое содержание страницы № 7
Back View Label Description Use 1 Barcode serial number label To contact Dell for technical support. 2 Regulatory rating label Lists the regulatory approvals. VESA mounting holes (100mm) 3 To mount the monitor. (Behind attached base plate) 4 Security lock slot To help secure your monitor. 5 Dell Soundbar mounting brackets To attach the optional Dell Soundbar.
Краткое содержание страницы № 8
Side View Right View
Краткое содержание страницы № 9
Bottom View Label Description 1 AC power cord connector 2 DVI connector 3 VGA connector Monitor Specifications Flat Panel Specifications Model Dell IN1940MW Monitor Screen type Active matrix - TFT LCD Panel type TN Screen dimensions 19 inches (19-inch viewable image size) Preset display area 408.24 (H) X 255.15 (V) Horizontal 408.24 mm (16.08 inches) Vertical 255.15 mm (10.05 inches)
Краткое содержание страницы № 10
Pixel pitch 0.2835 mm 160° (vertical) typical, 170° (horizontal) Viewing angle typical Luminance output 250 cd/m² (typical) Contrast ratio 1000 to 1 (typical) Faceplate coating Antiglare with hard-coating 3H Backlight LED light bar system Response Time 5 ms typical Color depth 16.7 millions colors Color Gamut 83% CIE1976 (typical)* *[IN1940MW] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards. Resolution Specifications Model Dell IN1940MW Monitor Horizontal scan
Краткое содержание страницы № 11
VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.3 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 768 60.0 75.0 78.8 +/+ VESA, 1152 x 864 67.5 75.0 108.0 +/+ VESA, 1280 x 800 49.7 59.8 83.5 -/+ VESA, 1280 x 1024 64.0 60.0 108.0 +/+ VESA, 1280 x 1024 80.0 75.0 135.0 +/+ VESA, 1440 x 900 - Analog 55.9 59.9 106.5 -/+ VESA, 1440 x 900 (CTV-R) - Digital 55.5 59.9 88.8 +/- Electrical Specifications Analog RGB, 0.7 Volts +/- 5%, positive pola
Краткое содержание страницы № 12
Dimensions (with stand) Height 372.9 mm (14.68 inches) Width 443.8 mm (17.47 inches) Depth 163.5 mm (6.44 inches) Dimensions (without stand) Height 290.8 mm (11.45 inches) Width 443.8 mm (17.47 inches) Depth 52.0 mm (2.05 inches) Stand dimensions Height 140.4 mm (5.53 inches) Width 236.0 mm (9.29 inches) Depth 163.5 mm (6.44 inches) Weight Weight with packaging 3.6 kg (7.93 lb) Weight with stand assembly and 3.0 kg (6.61 lb) cables Weight without stand assembly (For wall mount or VESA mount 2.4
Краткое содержание страницы № 13
Storage: 5% to 90% (non-condensing) Non-operating Shipping: 5% to 90% (non-condensing) Altitude Operating 3,048 m (10,000 ft) max Non-operating 10,668 m (35,000 ft) max 78.5 BTU/hour (maximum) Thermal dissipation 58.0 BTU/hour (typical) Power Management Modes If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as Power Save Mode*. If the computer detects input from key
Краткое содержание страницы № 14
Pin Assignments VGA Connector Pin 15-pin Side of the Connected Signal Cable Number 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.3V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock
Краткое содержание страницы № 15
DVI Connector Pin 24-pin Side of the Connected Signal Number Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Self test 16 Hot Plug Detect 17 TMDS RX0- 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating
Краткое содержание страницы № 16
22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides its Extended Display Identification Data (EDID) to the computer using Display Data Channel (DDC) protocols so the computer can configure itself and optimize the monitor settings. Most monitor installations are . automatic; you can select different settings if desired. For more information about changing the monitor settings
Краткое содержание страницы № 17
Back to Contents Page Setting Up the Monitor Dell™ IN1940MW Monitor User's Guide Attaching the Stand Removing the Monitor Stand for VESA Wall Mount Connecting Your Monitor Attaching Dell Soundbar AX510PA (optional) Attaching the Stand NOTE: The stand base is detached when the monitor is shipped from the factory. 1. Assemble the stand riser to stand base. a. Place the monitor stand base on a stable table top. b. Slide the monitor stand body in the correct direction down onto the sta
Краткое содержание страницы № 18
2 Attach the stand assembly to the monitor. a. Place the monitor on a soft cloth or cushion near the edge of a desk. b. Align the stand assembly bracket to the monitor groove. c. Slide the bracket towards the monitor until it locks in place.
Краткое содержание страницы № 19
Removing the Monitor Stand for VESA Wall Mount To remove the stand assembly from the monitor: 1. Place the monitor panel on soft cloth or cushion on a stable flat table. 2. Use a long screwdriver to push the release latch located in a hole just above the stand. 3. Once the latch is released, remove the stand assembly from the monitor.
Краткое содержание страницы № 20
Connecting Your Monitor WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. Connect the blue (VGA) cable from your monitor to your computer. NOTE: If your computer supports a DVI connector, connect the white DVI cable (optional) from your monitor to your computer. NOTE: Do not connect both the VGA and the DVI cables to the computer as all monitors shi
