Краткое содержание страницы № 1
Elo Entuitive Touchmonitor
User Guide
17" LCD Desktop Touchmonitor
1725L Series
Revision A
P/N 008541
Elo TouchSystems, Inc.
1-800-ELOTOUCH
www.elotouch.com
Краткое содержание страницы № 2
Краткое содержание страницы № 3
Copyright © 2001 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Краткое содержание страницы № 4
ii
Краткое содержание страницы № 5
Table of Contents Chapter 1 Appendix B Introduction 1 Touchmonitor Safety 21 Precautions . . . . . . . . . . . . . . . . . . . . 1 Care and Handling of Your Touchmonitor. . . . 23 About the Product . . . . . . . . . . . . . . . . . 1 Appendix C Chapter 2 Technical Specifications 25 Installation and Setup 3 Compatibility Modes . . . . . . . . . . . . . . 25 Product Overview . . . . . . . . . . . . . . . . . 4 VESA Modes . .
Краткое содержание страницы № 6
iv
Краткое содержание страницы № 7
C HAPT ER 1 C HAP TER 1INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive LCD desktop touchmonitor. Your new high-resolution industrial touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between you and your touchmonitor. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximiz
Краткое содержание страницы № 8
Plug & Play High quality full screen re-scaling VESA DDC 1/2B data communication VESA DPMS power saving Worldwide agency approvals that include UL, CUL, TÜV- Bauart, FCC, CE, C-Tick, VCCI IntelliTouch or AccuTouch Technology For full Product Specifications refer to Appendix C. 1-2 Elo Entuitive Touchmonitor User Guide
Краткое содержание страницы № 9
C HAPT ER 2 C HAP TE R 2INSTALLATION AND SETUP This chapter discusses how to setup your LCD desktop touchmonitor and how to install Elo TouchSystems driver software. Please make sure that the following items are included in the carton and are in good condition. Video cable Serial touchscreen cable Brick power supply Quick Installation Guide CD Monitor power cable Software (US/Canada) User Guide European monitor power cable 2-3
Краткое содержание страницы № 10
Product Overview Main Unit LCD Display Rear View 2-4 Elo Entuitive Touchmonitor User Guide
Краткое содержание страницы № 11
Connecting Your Touchmonitor Before connecting the cables to your touchmonitor and computer, be sure that the touchmonitor and computer are off. Video cable Serial touchscreen cable Brick power supply Female 9-pin Serial Female 15-pin touchscreen video connector connector Monitor power cable (US/Canada) European monitor Power power cable Connections on underside Figure 2.1 Touchmonitor cables and connections 2-5
Краткое содержание страницы № 12
Video Cable Connection Connections on underside Female 15-pin video connector Video Video port cable Ferrite bead 1 Set the touchmonitor on a solid horizontal surface, such as a table or desk. 2 Connect the female end of the video cable connector to the back of the LCD monitor, and connect the other end to the back of the computer. 3 Secure the cable to your touchmonitor and computer by tightening the screws on the connector clockwise. 2-6 Elo Entuitive Touchmonitor User Guide
Краткое содержание страницы № 13
Touchscreen Cable Connection Connections on underside Female 9-pin serial touchscreen connector Serial touchscreen cable 1 Connect the female end of the 9-pin touchscreen cable to the serial port on the back of your computer. 2 Connect the male end of the cable to the serial touchscreen connector on your touchmonitor. 3 Secure the cable to your touchmonitor and computer by tightening the screws on the connector clockwise. 2-7
Краткое содержание страницы № 14
Power Cable Connection Connections on underside Brick power cable port Serial touchscreen cable Power cable Brick power supply 1 Depending on where you live, you will use either the European or US/Canadian power cable. Connect the female end of the power cable to the Brick power supply. 2 Connect the Brick power supply into the power port on the touchmonitor. To protect your equipment against risk of damage from electrical surges in the power line, plug the Brick supply’s power cord into a su
Краткое содержание страницы № 15
Video Input Pin Assignment This section describes the pin assignment of the LCD’s 15 Pin Mini D-sub (video cable) connector. Pin No. Signal Connector 1 Red Video Signal 2 Green Video Signal 3 Blue Video Signal 4 N.C. 5 Ground 6 Ground for red video signal 7 Ground for green video signal 8 Ground for blue video signal 9 N.C. 10 Ground 11 N.C. 12 DDC data 13 Horizontal sync signal 14 Vertical sync signal 15 DDC clock 2-9
Краткое содержание страницы № 16
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 Additional drivers and driver information for other operating systems (including MS DOS, Windows 3.x, OS/2, Macintosh and Linux) are available on the Elo TouchSystems web site at www.elotouch.com. Your Elo touchmon
Краткое содержание страницы № 17
C HAPT ER 3 C HAP TER 3OPERATION Variations in video output and application will likely require you to adjust your touchmonitor to optimize the quality of the display. For best performance, your monitor should be operating in native resolution; that is, 1280 x 1024 at 75 Hz. Use the Display control panel in Windows to choose 1280 x 1024 resolution. Operating in other resolutions will degrade video performance. For further information, please refer to Appendix A. All adjustments you make to t
Краткое содержание страницы № 18
Touchmonitor Controls All adjustments are made using the on-screen display (OSD) controls. Figure 3.1 Touchmonitor Controls Control Function Press the power key to turn the monitor on. Press it again to turn the Power monitor off. Menu Enable or disable the OSD adjustment menu. Move from the submenu back to the previous menu. Select To select the adjustment items from the OSD menu. Adjust To scroll up in the menu or to increase the value of the selected item. To scroll down in the menu or to
Краткое содержание страницы № 19
Screen Adjustments The setting switches are normally in stand-by mode. 1 Push the MENU button once to display the main menu of the screen adjustment. The adjustable items will be displayed in the main menu. 2 Use the ADJUST and ADJUST buttons to select the desired setting icon. 3 Push the SELECT button to enter the sub-menu. 4 Once the sub-menu appears, use the ADJUST and ADJUST buttons to change the setting values. 5 After making the adjustment, push the SELECT button to memorize the se
Краткое содержание страницы № 20
H-POSITION H-Position is used to adjust the horizontal image position. A slider with the current value is displayed. V-POSITION V-Position is used to adjust the vertical image position manually. A slider with the current value is displayed. CLOCK Reduce vertical stripes in the screen image. PHASE Reduce horizontal stripes in the screen image. AUTO CONFIG Adjustment This function will automatically set the parameters of PHASE, CLOCK, H-POSITION, and V-POSITION. NOTE: To manually change the AU
