Краткое содержание страницы № 1
Краткое содержание страницы № 2
Elo Entuitive Touchmonitor User Guide For 15", 17", 19" and 21" CRT Open Frame Series Touchmonitors ET1X8XC-4XWA-1 Series Models ET2187C-4XWA-1 Series Models Revision D P/N 008551 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com www.elogaming.com
Краткое содержание страницы № 3
Table of Contents Chapter 1 Regulatory Information 29 Introduction 1 Warranty 31 Precautions . . . . . . . . . . . . . . . . . . . . 1 About the Product . . . . . . . . . . . . . . . . . 1 Index 33 Chapter 2 Installation and Setup 3 Unpacking Your Touchmonitor. . . . . . . . . . . 3 Connecting Your Touchmonitor . . . . . . . . . . 4 Connect the Video Cable. . . . . . . . . . . . 4 Connect the Touchscreen Communication Cable . .
Краткое содержание страницы № 4
Copyright © 2003 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Краткое содержание страницы № 5
3
Краткое содержание страницы № 6
C H A P TER 1 C HAPT ER 1INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new high-resolution touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in CRT display design. This combination of features creates a natural flow of information between a user and the touchmonitor. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your
Краткое содержание страницы № 7
Patented iTouch technology from Elo TouchSystems. Either RS-232 serial or USB touch interface 1-2 Elo Entuitive Tou chmon ito r User Guide
Краткое содержание страницы № 8
C H A P TER 2 C HAP TER 2INSTALLATION AND SETUP This chapter discusses how to install your CRT touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 5 items are present and in good condition: NOTE: Power cord is not included. Or USB cable Serial cable CRT Touchmonitor Quick Installation Guide VGA cable CD Software Quick Installation CD Software Guide 2-3
Краткое содержание страницы № 9
Connecting Your Touchmonitor IMPORTANT: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. Female 9-pin serial or Video cable USB type touchscreen connector Female 15-pin Power video connector Serial touchscreen cable OR USB touchscreen cable Connect the Video Cable Connections on underside Female 15-pin video connector Video port Video cable Connect one end of the video cable to the video connector on your PC and the other
Краткое содержание страницы № 10
Connect the Touchscreen Communication Cable Connections on underside Female 9-pin serial or USB type touchscreen connector Serial or USB port Serial or USB cable Connect the touchscreen cable. Connect one end to the appropriate port on the back of your computer. Connect the other end of the cable to the touchscreen connector on your touchmonitor. The touchscreen cable connectors should fit snugly into the connectors on your touchmonitor and computer. Secure the cable by turning the thumb
Краткое содержание страницы № 11
Connect the Power Cable Connections on underside Power cable Power cable Your monitor does not include a power cable. You may either purchase a country specific power cable from Elo (www.elogaming.com), or construct your own custom power cable (see Appendix B for details). Connect the power cable to the AC connector on your touchmonitor. To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a switched surge prote
Краткое содержание страницы № 12
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows XP Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 Additional drivers and driver information for other operating systems are available on the Elo TouchSystems web site at www.elogaming.com. Your Elo touchmonitor is plug-and-play compliant. Information o
Краткое содержание страницы № 13
Installing the Touch Driver for Windows XP, Windows 1 2000 , Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. 2 Follow the directions on the screen to complete the driver setup for your version of Windows. If the AutoStart feature is not a
Краткое содержание страницы № 14
You must have already completed Steps 1 and 2 before proceeding. Refer to Chapter 2 of the Elo DOS and Windows Driver Guide as necessary for additional installation information. To run the INSTALL program: 1 Type INSTALL at the DOS prompt in the directory containing the driver install files. 2 INSTALL asks you to select the software to install. Then choose d:\EloDos_W31 from the displayed list. 3 INSTALL also asks you for the paths to use during installation, or you may use its defaults. IN
Краткое содержание страницы № 15
2-10 Elo En tuitive Touchmonitor User Gu ide
Краткое содержание страницы № 16
C H A P TER 3 C HAP TER 3OPERATION About Touchmonitor Adjustments By design, your Elo Entuitive touchmonitor should not require any adjustments. The factory settings will give you optimum video results with most standard PC video display adapters. However, after connecting your touchmonitor you can further optimize the settings to meet your requirements by following the directions in this chapter. All adjustments you make to the controls are automatically memorized, so you do not need to res
Краткое содержание страницы № 17
3 Push the OSD knob to adjust the highlighted item. The display unit automatically saves the new settings in about 45 seconds after your last adjustments. The menu will automatically disappear or you can push the OSD knob to make the menu disappear. EXIT RGB OSD R Figure 3.1 OSD Menu 3-12 Elo En tuitive Touchmonitor User Gu ide
Краткое содержание страницы № 18
OSD Adjustments Symbol Function Process Adjusts the horizontal size of the entire screen image. H. Size Adjusts the horizontal position of the entire screen image. H. Position Adjusts the vertical size of the entire screen image. V. Size Adjusts the vertical position of the entire screen image. V. Position Simultaneously changes vertical and horizontal image size. Zoom See Figure 3.3, page 3-16. Geometry If the vertical sides of the picture curve in or bulge out, you can correct the distortion
Краткое содержание страницы № 19
Corrects vertical top and bottom linearity. C. Correct Clears vertical moire if a series of concentric circles or arcs appear on your screen. Note: Moire is an interface pattern that makes the screen seem to have faint lines. A picture that is rastered or consists of small repeating figures is sensitive to moire interference. Strong colors are also liable to intensify moire. The moire V. Moire pattern on the screen does not affect the printout of the image. Clears horizontal moire if a seri
Краткое содержание страницы № 20
If you have moved the display unit, you should perform demagnetization. Demagnetizing takes place automatically when the display unit is switched on, and the unit normally maintains faultless color purity during operation. If you have tilted, swiveled or moved the display unit, you can perform demagnetization. During the process the picture is distorted for a few seconds. After demagnetization, the color impurities have disappeared if caused by stray magnetic fields. Do not use the degauss
