Краткое содержание страницы № 1
®
ViewSonic
VE710s/VE710b
LCD Display
- User Guide
- Guide de l'utilisateur
- Bedienungsanleitung
- Guía del usuario
- Guida dell'utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Podr cznik u ytkownika
- Használati útmutató
- Py
- Uživatelská píruka
-
-
-
-
-
Краткое содержание страницы № 2
Contents Compliance Information ........................................................2 Important Safety Instructions .................................................3 Product Registration..............................................................4 For Your Records..................................................................4 Getting Started Package Contents.................................................................5 Precautions ..................................................
Краткое содержание страницы № 3
Compliance Information For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there i
Краткое содержание страницы № 4
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instruc- tions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarize
Краткое содержание страницы № 5
Copyright © ViewSonic Corporation, 2004. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DD
Краткое содержание страницы № 6
Getting Started ® Congratulations on your purchase of a ViewSonic LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” refers to Microsoft Windows 95, 98, NT, XP, 2000 and Me (Millennium). Package Contents IMPORTANT: Save all packing material. Your LCD display package includes: • LCD display • Power cords • ViewSonic Wizard CD-ROM NOTE: The CD jacket contains the Quick Start Guide, and the CD includes User Guide PDF files
Краткое содержание страницы № 7
Quick Installation Optional: For instructions on wall mounting, If your computer does not have a CD-ROM see page 5 of this user guide. drive,see Customer Support. (1) Wait for the CD-ROM to auto-start. 1 Connect power cord NOTE: If the CD-ROM does not auto-start: 2 Connect video cable double-click on the CD-ROM icon in the Windows Explorer, then double-click on Make sure both the LCD display and viewsonic.exe. computer are turned OFF (2) Follow the on-screen instructions. Connect the video cab
Краткое содержание страницы № 8
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: 1 Disconnect Power. 2 Push the LCD display back and down flat against the base as shown. 3 Lay the LCD display face down on a towel or blanket. Notice the four screw holes on the back cover. Four screw 4 Attach the mounting b
Краткое содержание страницы № 9
Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and refresh rate (or vertical frequency; ® example 60 Hz). After setting the timing mode, use the OnView controls to adjust the screen image. For the best picture quality set your LCD dislay timing mode to: VESA 1280 x 1024 @ 60 Hz. To set the Timing Mode: 1 Set the resolu
Краткое содержание страницы № 10
Adjusting the Screen Image ® Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in “Main Menu Controls” on page 9. Main Menu With OnView controls Front Control Panel shown below in detail Displays the control screen for the highlighted control. Scrolls through menu options and adjusts the displayed control. Also toggles between two controls on some P
Краткое содержание страницы № 11
Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. Main Menu AUTO SET Auto Adjust Contrast/Brightness Color Adjust i Information Image Adjust ? Setup Menu Memory Recall 1:EXIT 2:SELECT NOTE: All OnView menus and adjustment screens disappear automatically after about 15 seconds. This time period is adjustable through the Setup menu and the OSD timeout control described on page 11. 2 To highlight a control you want to adj
Краткое содержание страницы № 12
Main Menu Controls Adjust the menu items shown below by using the up and downbuttons. Control Explanation Auto Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE: Auto Adjust works with most common video cards. If this function does not work on your LCD dislay, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value. Contrast adjusts the difference
Краткое содержание страницы № 13
Control Explanation User — Individual adjustments for red, green, and blue. 1 To select color (R, G or B) press button [2]. 2 To adjust selected color, press or . 3 When you are finished making all color adjustments, press button [1] twice. Information displays the timing mode (video signal input) i coming from the graphics card in your computer. See your graphic card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). VESA 1280 x 1024 @ 60 Hz (
Краткое содержание страницы № 14
Control Explanation Fine Tune sharpens focus by aligning the illuminated text and/ or graphic characters. NOTE: Try the Auto Adjust (see page 9) before using the Fine Tune control. Sharpness adjusts the clarity and focus of the screen image. Setup Menu displays the menu shown below. ? The Setup Menu controls are explained below. Language Select allows you to choose the language used in the menus and control screens. Resolution Notice advises the optimal resolution to use. OSD Position allows yo
Краткое содержание страницы № 15
Control Explanation OSD Background allows you to turn the On-Screen display OSD background on or off. This means that while making adjustments from the OSD control screens you can also view open software applications, or the Windows desktop. Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed in this user guide. ViewSonic VE710b_VE710s 14
Краткое содержание страницы № 16
Other Information Specifications Type 17" (full 17" viewable diagonal area), TFT (Thin Film LCD Transistor), Active Matrix XGA LCD, 0.264mm pixel pitch Color Filter RGB vertical stripe Glass surface Anti-Glare +20° , -5° Panel tilt Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms) Input signal Separate Sync, f :30-82 kHz, f :50-75 Hz h v PC Up to 1280 x 1024 Non-interlaced Compatibility 1 Power Macintosh up to 1152 x 870 Macintosh Recommended
Краткое содержание страницы № 17
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD dislay. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Make sure the video cable supplied with the LCD dislay is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the L
Краткое содержание страницы № 18
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Web site T = Telephone Email Region F = FAX United States www.viewsonic.com/ T: (800) 688-6688 service.us@ support F: (909) 468-1202 viewsonic.com Canada www.viewsonic.com/ T: (800) 688-6688 service.ca@ support F: (909) 468-1202 viewsonic.com United Kingdom www.viewsoniceurope.com T: 0800 833 648 service.eu@ F: (01293) 643910 viewsonice
Краткое содержание страницы № 19
Cleaning the LCD Dislay • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1 Use a soft, dry cloth. 2 If still not clean, apply a small amount of a non-a
Краткое содержание страницы № 20
Limited Warranty VIEWSONIC LCD DISPLAY What the warranty covers: ® ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LC
