Краткое содержание страницы № 1
LM-8115 / TM-8115 / TM-8315
LCD Touch Monitor
User’s Manual
Rev. B0
I. FEATURES
• LM/TM-8115 is a stand along LCD monitor for industrial and commercial use.
• TM-8315 is a second display which suit for Posiflex POS Terminals with Gen.5
base stand.
• Application covers POS, Factory Automation etc.
• High quality 15” TFT LCD panel with scaling function for full screen display.
• TM-8315 support power supply through LCD cable from Posiflex Terminals
(Power supply need to setup f
Краткое содержание страницы № 2
II. CARTON CONTENTS 1. Touch Monitor (Main unit + Adjustable base stand assembly) 2. User’s Manual 3. VGA cable 4. USB cable 5. Power adaptor & power cord(For TM/LM-8115) (For TM-8315, please refer to the terminals manual to support power from VGA cable) 6. Posiflex Product Information CDROM 7. Option RS232 cable III. INSTALLATION GUIDE TM/LM-8115 Since the monitor and stand are packaged separately, please take out and hold the PE foams carefully and DO NOT detach and drop it
Краткое содержание страницы № 3
TM-8315 After open the carton, please take out the monitor carefully. Please place the monitor’s bracket to the back of base stand and fasten the screws which circled on the upper picture. IV. PARTS IDENTIFICATION A. FRONT VIEW TM/LM-8115 Main Unit Display Screen + Touch Panel Logo + Power Indicator Adjustable Base Assembly Option SD-400Z TM-8315 Main Unit Display Screen + Touch Panel Logo + Power Indicator Adjustable Base Assembly
Краткое содержание страницы № 4
B. SIDE VIEWS TM/LM-8115 Lock/release button to detach the main unit Control button area Push in this direction to adjust the tilt angle Lock/release lever of the display panel OSD button NXT button “+” button “-“ button Power switch TM-8315 Control button area Bracket to fix on the base stand OSD button NXT button “+” button “-“ button Power switch Part 4
Краткое содержание страницы № 5
V. INPUT / OUTPUT PORTS USB (B) USB (A) VGA COM 12 V DC (to Host) (to Devices) input (option RS232) input VI. AVAILABLE OPTION ITEMS 1. Side mount upgrade kit SD-400Z or KP-300 2. Wall mount kit (WB-6000V-B) VII. HARDWARE INSTALLATION A. Option Side Mount Upgrade Kit When a side-mount upgrade kit option such as SD-400Z is ordered with the LM-8115 / TM-8115 / TM-8315 monitor, this option is already installed in the delivery. No matter the kit itself contains MSR o
Краткое содержание страницы № 6
Step A: Prepare a soft clean flat surface, such A as a piece of cloth on the desk to seat B the front surface of main unit. C Step B: Press the Lock/Release button for main unit detach and meantime ... Step C: Slide the base stand assembly to separate the main unit from base stand Refer to the bottom view picture of the separated Cable Passage base, pass all cable through the cable tunnel as hollow arrowed with cable tie from the cable passage to the ma
Краткое содержание страницы № 7
C. Option Wall Mount Kit For TM/LM-8115 Select a flat surface on wall of adequate strength and with proper ventilation and space condition. Please use the right material to hold this monitor according to the wall material (Drywall, concrete, solid wood, etc). Consult with your contractor if it is necessary. Please fix WB-6000V-B at the holes inside the guide holes circled in the picture to the wall or Front Side Back side fix it to a VESA joint at bosses on back WB-6000V-B WB-6000V
Краткое содержание страницы № 8
clicking on the right button of a mouse, touching any point on the screen surface after touching the right-click sticky button results as a click on the right button of the mouse at that point. C. POSIFLEX USB TOUCH MANAGER a. USB touch manager Once the USB control program is installed, the user can utilize it to calibrate the touch screen, define mouse button emulation parameters, enable right button emulation or define the click sound’s tone and duration. Please go to “Program File
Краткое содержание страницы № 9
box is checked. Touch Mode Setting – Only one of the three radio buttons can be selected. The mouse emulation refers to the drag and drop function. OK – This button accepts all parameters set and closes the utility window. Apply – This button accepts all parameters set and remains in the utility window. Cancel – This button discards all changes to the parameters and closes the utility window. Help – This button provides explanations. b. USB touch calibrator This program he
Краткое содержание страницы № 10
full screen display of Windows DOS box should be avoided. E. APPLICATION LIMITATION The USB touch is not applicable for OS other than Windows as USB mouse is not supported in DOS environment. The USB touch is also not applicable when the monitor is used to be the extended screen in multiple monitor application. In using the MSR of the side mounted upgrade option for reading a magnetic stripe card, be sure to insert the card to the bottom with magnetic stripe facing the mark aside the
Краткое содержание страницы № 11
B. OSD functions Press “OSD” button with a normal display on the screen to activate the OSD functions (On Screen Display adjustment). The OSD window will pop up on the screen. On top part of this window is a Posiflex logo with the OSD firmware version indicated to its lower right. Below this area is a row of icons for main OSD menu. Below the main menu is a group of icons for submenu that corresponds to one icon selected in the main menu. An analysis of the video signal on resolution an
Краткое содержание страницы № 12
exits the OSD window leaving 2 icons below at center of the screen. Press “NXT” button to switch the selection. Press “OSD” button to make the choice. “ACCEPT”: Accept the adjustment setting. “REJECT”: Decline the adjustment setting and return to previous setting. “AUTO RGB RESET”: Upon an “OSD” button press on this icon the monitor will perform an automatic RGB reset and exits the OSD window leaving 2 icons below at center of the screen. Press “NXT” button to switch the selection. Pr
Краткое содержание страницы № 13
horizontal size, phase, horizontal position, vertical position and exit. “AUTO GEOMETRY ADJUST”: Upon an “OSD” button press on this icon the monitor will perform an automatic geometry adjustment and exits the OSD window leaving 2 icons below at center of the screen. Press “NXT” button to switch the selection. Press “OSD” button to make the choice. “ACCEPT”: Accept the adjustment setting. “REJECT”: Decline the adjustment setting and return to previous setting. “HORIZONTAL SIZE”: When t
Краткое содержание страницы № 14
OSD horizontal position, OSD vertical position and exit. “OSD TIME”: When this item is selected, there will be only the OSD time icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” or “-” button to adjust the waiting time for OSD operation before OSD termination between 5 to 60 seconds. Default is 30 seconds. Press “OSD” button to save the current setting and return to “OSD submenu”. “OSD HORIZONTAL POSITION”: When this item i
Краткое содержание страницы № 15
XI. SUPPORTED DISPLAY MODES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of screen. Maximum supported color depth is 24 bits or 16.2 M colors. Supported display modes are as in the table: Horizontal Frequency Display Resolution Refresh Rate (Hz) (KHz) 640*400 70 31.5 60 31.5 640*480 72 37.9 75 37.5 720*400 70 31.5 56 35.1 60 37.9 800*600 72 48.1 75 46.9 60 48.4 1024*768 70 56.5 75 60 XII. TROUBLE SHOOTING In case o
