Краткое содержание страницы № 1
220S4L
www.philips.com/welcome
EN User manual 1
Customer care and warranty 32
Troubleshooting & FAQs 37
Краткое содержание страницы № 2
Table of Contents 1. Important ...............................................1 1.1 Safety precautions and maintenance .1 1.2 Notational Descriptions ............................2 1.3 Disposal of product and packing material ...............................................................3 2. Setting up the monitor .......................4 2.1 Installation .........................................................4 2.2 Operating the monitor ..............................7 2.3 Remove the Bas
Краткое содержание страницы № 3
1. Important Please use approved power cord provided 1. Important by Philips all the time. If your power cord is missing, please contact with your local This electronic user’s guide is intended for service center. (Please refer to Customer anyone who uses the Philips monitor. Take time Care Consumer Information Center) to read this user manual before you use your Do not subject the monitor to severe monitor. It contains important information and vibration or high impact conditions
Краткое содержание страницы № 4
1. Important 1.2 Notational Descriptions Temperature: 0-40°C 32-95°F Humidity: 20-80% RH The following subsections describe notational conventions used in this document. Important information for Burn-in/Ghost image Notes, Cautions and Warnings IMPORTANT: Always activate a moving Throughout this guide, blocks of text may be screen saver program when you leave accompanied by an icon and printed in bold or your monitor unattended. Always activate italic type. These blocks contain
Краткое содержание страницы № 5
1. Important Taking back/Recycling Information for 1.3 Disposal of product and packing Customers material Philips establishes technically and economically Waste Electrical and Electronic Equipment- viable objectives to optimize the environmental WEEE performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primaril
Краткое содержание страницы № 6
2. Setting up the monitor Install the base 2. Setting up the monitor 220S4LS/220S4LA 1. Place the monitor face down on a smooth 2.1 Installation surface. Pay attention not to scratch or damage the screen. Package contents 220S4LS/220S4LA 220S4L 2. Hold the base with both hands. (1) Gently attach the base to the column until the three guiding pins rest into the position holes.
located at the bottom of the base, and secure the base to the column
Краткое содержание страницы № 7
2. Setting up the monitor 220S4LC 3. Hold the base with both hands. (1) Gently attach the base to the column 1. Place the monitor face down on a smooth until the three guiding pins rest into the surface. Pay attention not to scratch or position holes. damage the screen.
located at the bottom of the base, and secure the base to the column tightly. 2 2. Snap in the base in the VESA mount area. 1 5
Краткое содержание страницы № 8
2. Setting up the monitor Connecting to your PC Connect to PC 1. Connect the power cord to the back of 220S4LS
! 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the 1 2 3 video connector on the back of your 2 4 2 L 0 S S 4 computer. 4. Plug the power cord of your computer and 3 your monitor into a nearby outlet. 2 1 5. Turn on your computer and monitor. If the monitor displays an image, installation is 220S4LA complete. 1 5 2
Краткое содержание страницы № 9
2. Setting up the monitor Description of the On Screen Display 2.2 Operating the monitor What is On-Screen Display (OSD)? Description of the control buttons On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below:
220S4LS/220S4LC
Краткое содержание страницы № 10
2. Setting up the monitor The OSD Menu Below is an overall view of the structure of This monitor is designed for optimal the On-Screen Display. You can use this as a performance at its native resolution, 1680 × reference when you want to work your way 1050 @ 60 Hz. When the monitor is powered around the different adjustments later on. on at a different resolution, an alert is displayed on screen: Use 1680 × 1050 @ 60 Hz for best Main menu Sub menu results. Input VGA D
Краткое содержание страницы № 11
2. Setting up the monitor Height adjustment 2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 220S4LS/220S4LA 1. Place the monitor face down on a smooth 110mm surface. Pay attention not to scratch or damage the screen. (220S4LC) Pivot 90° 0° 2. =
mylars from the hinge cover. (220S4LC) 3. Remove the screws from hinge cover. 9
Краткое содержание страницы № 12
2. Setting up the monitor 4. Remove the base assembly. 3. Remove the screws from hinge cover. 1 2 220S4LC 1. Place the monitor face down on a smooth surface. Pay attention not 4. Remove the base assembly. to scratch or damage the screen. Note 2. =
This monitor accepts a 100mm x 100mm mylars from the hinge cover. VESA-Compliant mounting interface. 1 100mm 100mm 2 10
Краткое содержание страницы № 13
3. Image Optimization 2. Keep pressing to toggle among # 3. Image Optimization Photo, Movie, Game, Economy and Off. 3. The SmartImage on screen display will remain on screen for 5 seconds, or you can 3.1 SmartImage >#?>J
! What is it? 4. When SmartImage is enabled, the sRGB SmartImage provides presets that optimize scheme is disabled automatically. To use display for different types of content, dynamically sRGB, you need to disable SmartImage adjusting
Краткое содержание страницы № 14
3. Image Optimization washout in brighter areas maintaining a 3.3 Philips SmartControl Premium dynamic natural values for the ultimate The new SmartControl Premium software video display. by Phillips allows you to control your monitor Game: Turn on over drive circuit for best via an easy to use on-screen graphic interface. response time, reduce jaggy edges for fast Complicated adjustments are a thing of the moving objects on screen, enhance contrast past as this user friendly softwar
Краткое содержание страницы № 15
3. Image Optimization You can adjust more options without wizard by Standard pane. Start with Standard pane Adjust menu Adjust Menu allows you to adjust Brightness, Contrast, and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation. Color menu Color Menu allows you to adjust RGB, Black Level, White Point, Display Gamma, Calibration, SmartImage, and SmartKolor. You can follow the instruction and do t
Краткое содержание страницы № 16
3. Image Optimization 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. 6. Must have patent info in calibration screen. 14
Краткое содержание страницы № 17
3. Image Optimization First Color Calibration Screen Eco Power menu Previous button is disabled until the second color screen. Next goes to the succeeding target (6-targets). Final next goes File > Presets pane. Options menu Cancel closes the UI and returns to the plug in page. Options>Preferences - Will only be active when selecting Preferences from the drop- SmartImage down Options menu. On a non-supported Allow users to change setting for better display display capable of D
Краткое содержание страницы № 18
3. Image Optimization menu displays SmartControl Premium Option>Auto Pivot. selections for Select Preset and Tune Display in the desktop right-click context menu. Disabled removes SmartControl Premium from the right click context menu. Enable Task Tray icon is checked (On) by default. Enable context menu shows the task tray menu for SmartControl Premium. A right click on the task tray icon displays the menu options for Help, Technical Support. Check for Update, About, and Exit. Whe
Краткое содержание страницы № 19
3. Image Optimization To enable Theft Deterrence, click on On button Help>Version - Will only be active when to bring up the following screen: selecting Version from the drop- down Help menu. On a non-supported display capable of User can enter PIN between 4 and 9 digits DDC/CI, only the Help and Options tabs are numbers only. available. After entering PIN, Accept button takes user to the pop-up dialog box on the following page. Minimum minutes set to 5. Slider set to 5 by de
Краткое содержание страницы № 20
3. Image Optimization Technical Support - Displays the tech support page. Check for Update - Takes the user to PDI Landing and checks the user’s version against the most current available. About - Displays detailed reference information: product version, release information, and product name. The Context Menu has four entries: Exit - Close SmartControl Premium. To run SmartControl Premium again, either SmartControl Premium - When selected select SmartControl Premium from
