Краткое содержание страницы № 1
User’s Manual
MultiSync LCD8205
MultiSync LCD8205-P
Краткое содержание страницы № 2
Index Declaration of conformity ............................................................................................................................. English-1 Important Information ................................................................................................................................... English-2 Warning, Caution ................................................................................................................................ English-2 Declaration
Краткое содержание страницы № 3
Declaration of conformity For USA FCC Information 1. Use the attached specified cables with the MultiSync LCD8205 (L828N0)/MultiSync LCD8205-P (L828N0) color display so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance. (2) Please use the supplied shielded video signal cable. Use of other cables and adapters may cause interference with radio and television reception. 2. This equipment has been tested and found t
Краткое содержание страницы № 4
Important Information WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE
Краткое содержание страницы № 5
Safety Precautions, Maintenance & Recommended Use FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE Recommended Use FOLLOWING WHEN SETTING UP AND USING • For optimum performance, allow 20 minutes for warm-up. THE MULTI-FUNCTION MONITOR: • Rest your eyes periodically by focusing on an object at least • DO NOT OPEN THE MONITOR. There are no user 5 feet away. Blink often. serviceable parts inside and opening or removing covers • Position the monitor at a 90° angle to windows and other may expose you to dang
Краткое содержание страницы № 6
Contents Your new MultiSync LCD monitor box* should contain the following: • LCD monitor • Screw for clamp (M4 x 10) x 2 1 • Power Cord* • CD-ROM • Video Signal Cable • Eyebolt x 2 • Setup Manual • Washer x 2 • Wireless Remote Control and AAA Batteries • Hanger bolt x 8 • Clamp 15-pin mini D-SUB male to DVI-A DVI-D to DVI-D cable Screw for clamp Washer x 2 (M4 x 10) x 2 Clamp 1 Power Cord* Hanger bolt x 8 Setup Manual CD-ROM Eyebolt x 2 Setup Manual Wireless Remote Control and AAA Batteries 1 *
Краткое содержание страницы № 7
Installation This device cannot be used or installed without the Tabletop Orientation Stand or other mounting accessory for support. For proper • When using the display in the portrait position, the installation it is strongly recommended to use a trained, monitor should be rotated clockwise so that the left side NEC authorized service person. Failure to follow NEC is moved to the top and the LED indicator light is on the standard mounting procedures could result in damage to the bottom. This wi
Краткое содержание страницы № 8
3. Ventilation Requirements Attaching Mounting Accessories When mounting in an enclosed space or recessed area, The display is designed for use with the VESA mounting leave adequate room between the monitor and the system. enclosure to allow heat to disperse, as shown below. In order to aid in mounting, a lifting device must be used in conjunction with the attachable eyebolts. 1. Attach eyebolts for mounting This model is equipped with attachable eyebolts to aid in mounting. • Place the washer o
Краткое содержание страницы № 9
Parts Name and Functions Control Panel 1 POWER button ( ) Switches the power on/off. 2 CH +/- button Acts as button to move the highlighted area up or down to select adjustment items within OSD menu. 3 VOL +/- button Increases or decreases audio output level. Increases or decreases the adjustment level within OSD menu settings. 4 SEL button Enter Input Source OSD menu, [DVI], [PC], [HDMI], [AV1], [AV2], [S-Video] and [Component]. 5 MENU button Activates the OSD menu when the OSD menu is turned
Краткое содержание страницы № 10
Terminal Panel 1 HDMI connector 7 AV1 To input digital HDMI signals. AV1: For composite video signal. Audio L, R: To input audio signal from external equipment DVI IN (DVI-I) 2 such as a VCR or DVD player. To input digital or analogue RGB signals from a computer. 8 S-Video 3 SPDIF S-Video: To input the S-video (Y/C separate signal). Audio input connects to AV2’s Audio L/R. Optical digital audio out for HDMI input only. 9 AV2 4 EXTERNAL CONTROL (D-Sub 9 pin) AV2: For composite video signal. Con
Краткое содержание страницы № 11
Wireless Remote Control PC button 10 Selects input source of DVI connector. MENU button 11 Turns on the menu mode. 12 EXIT button Turns off the menu mode. 13 CH +/- button Acts as button to move the highlighted area up or down to select adjustment items within OSD menu. 14 VOL +/- button Increases or decreases audio output level. Increases or decreases the adjustment level within OSD menu settings. 15 ENTER button Makes selection. Operating Range for the Remote Control Point the top of the r
Краткое содержание страницы № 12
Setup NEC recommends the following battery use: 1. Determine the installation location • Place “AAA” size batteries matching the (+) and (-) signs CAUTION: Installing your LCD display must be done by a on each battery to the (+) and (-) signs of the battery qualified technician. Contact your dealer for compartment. more information. • Do not mix battery brands. CAUTION: IN ORDER TO AID IN MOUNTING, A LIFTING • Do not combine new and old batteries. This can shorten DEVICE MUST BE USED IN CONJUNCT
Краткое содержание страницы № 13
5. Switch on the power of all the attached external equipment When connected with a computer, switch on the power of the computer first. 6. Operate the attached external equipment Display the signal from the desired input source. 7. Adjust the sound Make volume adjustments when required. 8. Adjust the screen (See page 18) Make adjustments of the screen display position when necessary. 9. Adjust the image (See page 18) Make adjustments such as brightness or contrast when required. 10. Recommended
Краткое содержание страницы № 14
Connections Before making connections: * First turn off the power of all the attached equipment and make connections. * Refer to the user manual included with each separate piece of equipment. Connecting a Personal Computer Connecting your computer to your LCD monitor will enable you to display your computer’s screen image. Some video cards and a pixel clock over 162MHz may not display an image correctly. Your LCD monitor displays proper image by adjusting the factory preset timing signal automa
Краткое содержание страницы № 15
Connecting a DVD Player with component out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user’s manual for more information. Connect the LCD Monitor to a DVD Player • To connect the Component connector (RCA) on the LCD monitor, use an RCA connector cable (sold separately). LCD monitor To DVD Component video output To audio right output To audio left output English-13 RCA RCA English
Краткое содержание страницы № 16
Connecting a DVD Player with HDMI out Connecting your DVD player to your LCD monitor will enable you to display DVD video. Refer to your DVD player user’s manual for more information. Connect the LCD Monitor to a DVD Player • Please use an HDMI cable with HDMI logo. • It may take a moment for the signal to appear. • PC-DVI signals are not supported. LCD monitor To HDMI output HDMI connector Connecting to a Stereo Amplifier You can connect your stereo amplifier to your LCD monitor. Refer to your
Краткое содержание страницы № 17
Basic Operation Power ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red while powered off. Power Button English-15 English
Краткое содержание страницы № 18
Power Indicator Picture Size DVI, PC Mode Status Indicator Light Power ON Green 16:9 1:1 4:3 Power OFF (Standby)* Red Power consumption under 1W HDMI, AV1, AV2, S-Video, Component Power Save Red blinking 16:9 Panorama Zoom1 Zoom2 4:3 14:9 Power consumption under 15W Not connected Green blinking Aspect ratio 1 1 * When in Power OFF (Standby) mode, RS-232C control do not function. Unchanged view* Picture size example* of image 16:9 Using Power Management The LCD monitor follows the VESA approved D
Краткое содержание страницы № 19
OSD (On-Screen-Display) Controls NOTE: Some functions may not be available depending on the model or optional equipment. Main Menu Item Main Menu Icons Key Guide Press MENU button Press UP and DOWN Press Right button to Press EXIT to exit to show OSD menu. to select the main enter the sub menu. menu. menu. Remote Control Press MENU button Press CH+ and CH- Press VOL+ button to Press MENU button to show OSD menu. buttons to select the enter the sub menu. to back to previous main menu. menu. Contr
Краткое содержание страницы № 20
OSD Setting Picture Picture Mode User Store last value at User setting. Dynamic Selection of the picture appearance. Standard Movie Mild User Brightness Adjust the brightness. Contrast Adjust the Contrast. Color (AV1/AV2/S-Video/Component) Adjust the Color. Tint (AV1/AV2/S-Video/Component) Adjust the Tint. Sharpness Adjust the Sharpness. Phase (Component) Adjust the Phase Color Temp User (PC, DVI, HDMI) This Function is for user setting of color Temp. Cool 2 This Function is for selection of pre
