Краткое содержание страницы № 1
MultiSync FP950
MultiSync FP1350
User's Manual
Краткое содержание страницы № 2
Declaration Declaration of the Manufacturer We hereby certify that the color monitors MultiSync FP950 JC-1946UMW MultiSync FP1350 JC-2241UMW are in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 61000-3-2 - EN 61000-3-3 - EN 50082-1 (IEC 801-2) (IEC 801-3) (IEC 801-4) and marked with NEC Home Electronics, Ltd. 686-1, NISHIOI OI-MACHI ASHIGARAKAMI-GUN KANAGAWA 258-8533, JAPAN
Краткое содержание страницы № 3
Safety Instruction Caution: When operating the JC-1946UMW/JC-2241UMW with a 220-240V AC power source in Europe except UK, use the power cord provided with the monitor. In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier. When operating the JC-1946UMW/JC-2241UMW with a 220-240V AC power source in Australia, use the power cord provided with the monitor.
Краткое содержание страницы № 4
TCO’99 Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and ser
Краткое содержание страницы № 5
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be adhered to in each country where the company implements its operational policy. The energy requirements include a demand that the computer and/or display, after a certain period of inacti
Краткое содержание страницы № 6
The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries,
Краткое содержание страницы № 7
English Deutsch Français Español Italiano
Краткое содержание страницы № 8
English
Краткое содержание страницы № 9
Contents FP Series monitor box* should contain the following: • MultiSync FP Series Monitor with tilt/swivel base MultiSync FP950 (JC-1946UMW) or MultiSync FP1350 (JC-2241UMW) • Power Cord • Signal Cable • USB Cable • Monitor Control Software • User’s Manual • Sales Office List Power Cord 15-pin mini Signal Cable D-SUB USB Cable Monitor User's Manual Sales Office List Control Software * Remember to save your original box and packing material to transport or ship the monitor. E-1
Краткое содержание страницы № 10
Quick Start To attach the MultiSync FP Series monitor to your system, follow these instructions: 1. Turn off the power to your computer and MultiSync monitor. If you are using the signal cable, continue to Step 2. If you are using a BNC cable, please skip to Step 3. NOTE: BNC cables may be purchased at your local electronics store. 2. For the PC: Connect one end of the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.1) and the other end to the back of
Краткое содержание страницы № 11
Computer Computer 15-pin mini D-SUB Mac Adapter (not included) Signal Cable Signal Cable Figure B.1 Figure A.1 4. Connect one end of the power cord to the MultiSync FP Series monitor and the other end to the power outlet (Figure D.1). 5. Turn on the monitor (Figure E.1) and the computer. 6. The Factory Setting for your monitor is set for D-SUB installation. If you are using a BNC cable connection, push the BNC/D-SUB button on the front of the monitor (Figure E.1) to switch settings. NOTE: If you
Краткое содержание страницы № 12
Power Outlet BNC Con- nector Power Cord Figure C.1 Figure D.1 BNC/D-SUB Power Button Figure E.1 E-4
Краткое содержание страницы № 13
® If your computer is equipped with USB and uses the Windows 98 operating system and you want to operate the monitor’s user controls using your system, you can install USB support by using the following procedure. To attach the USB port on your MultiSync FP Series monitor to a USB port on your system: 1. Using the supplied USB cable, connect the USB Series B connector end to the USB upstream port on the monitor (Figure 1). 2. Connect the other end of the supplied cable to the USB downstream port
Краткое содержание страницы № 14
Controls OSM(On-Screen Manager) control buttons on the front of the monitor function as follows: Main Menu Sub-Menu Exits the OSM menu. Exits to the OSM main menu. EXIT Moves the highlighted area Moves the highlighted area CONTROL up/down to select one of the up/down to select one of the ▲ /▼ controls. controls. Moves highlighted area Moves the bar in the - or + CONTROL left/right to select one of the direction to decrease or -/+ controls. increase the adjustment. Has no function . Only executes
Краткое содержание страницы № 15
x Color Control Color Presets 1 through 5, selects the desired color setting. The bar is replaced by the color setting choice from 1 to 5. Each color setting is adjusted at the factory to the stated Kelvin. If a setting is adjusted, the name of the setting will change from Kelvin to Custom. RED, GREEN, BLUE: Decreases or increases red, green, or blue depending upon which is selected. The change in color will appear on screen and the direction (decrease or increase) will be shown by the bars. pq
Краткое содержание страницы № 16
AREA CONVERGENCE: A small window will appear to indicate the area of adjustment — Top Horizontal, Top Vertical, Bottom Horizontal or Bottom Vertical. CORNER CORRECTION: Allows you to adjust the geometry of the corners of your display — Top, Top Balance, Bottom or Bottom Balance. LINEARITY: The Linearity selection allows you to adjust the spacing of the areas on the screen. The purpose of this control is to ensure that a 2 cm circle is a true 2 cm circle wherever it is drawn on the screen. The be
Краткое содержание страницы № 17
OSM TURN OFF: The OSM menu will stay on as long as it is in use. In the OSM Turn Off sub-menu, you can select how long the monitor waits after the last touch of a button to shut off the OSM menu. The preset choices are 10, 20, 30, 60, 120 seconds. OSM LOCK OUT: This control completely locks out access to all OSM functions except brightness and contrast controls. When attempting to activate OSM while in the lockout mode, a screen will appear indicating that OSM controls are locked out. To activat
Краткое содержание страницы № 18
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC FP SERIES COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Use the monitor in a clean, dry area. • Do not spill any liquids into the cabinet or use your monitor near water. • Do n
Краткое содержание страницы № 19
• If the monitor has been dropped or the cabinet damaged. • If the monitor does not operate normally by following operating instructions. • Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor. • The power cable connector is the primary means of detaching the system from the power supply. The monitor should be installed close to a power
Краткое содержание страницы № 20
• Use a document holder placed close to the screen. • Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize turning your head while you are typing. • Get regular eye checkups. Ergonomics To realize the maximum ergonomics benefits, we recommend the following: • Adjust the Brightness until the background raster disappears • Do not position the Contrast controls to its maximum setting • Use the preset Size and Position controls
