Краткое содержание страницы № 1
19” WIDE SCREEN LCD MONITOR
WITH INTEGRATED DIGITAL VIDEO RECORDER
Instruction Manual
English, French, and Spanish Version 2.0
Version angliase, française, et espagnol 2.0
Versión inglesa, francesa, y española 2.0
MODELS:
L19WD Series
Includes L19WD800 & L19WD1600
www.lorexcctv.com
Copyright © 2008 Lorex Technology Inc.
Краткое содержание страницы № 2
Thank you for purchasing this product. Lorex is committed to providing our customers with a high quality, reliable security solution. This manual refers to the following models: • L19WD800 Series (8-channel) • L19WD1600 Series (16-channel) To learn more about this system and our complete range of accessory products, along Manuals, Quick Start Guides, and Firmware, please visit our website at: http://www.lorexcctv.com CAUTION RISK OF ELECTRIC
Краткое содержание страницы № 3
L19WD Series Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1. Read
Краткое содержание страницы № 4
Important Safeguards Service Use 19. Cleaning - Unplug the video product from the 13. Servicing - Do not attempt to service this wall outlet before cleaning. Do not use liquid video equipment yourself as opening or cleaners or aerosol cleaners. Use a damp removing covers may expose you to cloth for cleaning. dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination should be mov
Краткое содержание страницы № 5
L19WD Series General Precautions 1. All warnings and instructions of this manual should be followed 2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth for cleaning 3. Do not use this unit in humid or wet places 4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked 5. During lightning storms, or when the unit is not used for a long time, disconnect the power
Краткое содержание страницы № 6
L19WD800 Series Features L19WD800 Series Features • High resolution 19” LCD widescreen monitor with integrated 8-channel digital video recorder • Pentaplex operation allows Viewing, Recording, Playback, and Backup the system simultaneously • Real-Time Recording: 240/480 FPS @ CIF Resolution (8/16ch) • H.264 video compression technology provides longer recording time and improved network transmission speed • Internet Remote Monitoring (software included) and Web Browser access • Mou
Краткое содержание страницы № 7
ENG L19WD Series Table of Contents Getting Started ..............................................................................................................................................8 Front Panel....................................................................................................................................................9 Front Panel (cont’d)...................................................................................................................
Краткое содержание страницы № 8
Getting Started Getting Started The system comes with the following components: 1 X INTEGRATED LCD DVR 1 X POWER ADAPTOR 1 X REMOTE SYSTEM WITH PRE-INSTALLED 1 X POWER ADAPTOR CABLE CONTROL HDD* 1 X USERS MANUAL 1 X ETHERNET 1 X MOUSE 1 X QUICK START GUIDE CABLE (PS/2) 1 X SOFTWARE CD *HARD DRIVE SIZE, NUMBER OF CHANNELS, AND CAMERA CONFIGURATION MAY VARY BY MODEL. PLEASE REFER TO YOUR PACKAGE FOR SPECIFIC CONTENT DETAILS. CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE REC
Краткое содержание страницы № 9
L19WD Series Basic Setup Make the following connections prior to starting the system for the first time. 1. Connect the cameras to the monitor Please see the Camera Installation section of this Front Panel manual for details. ATTENTION: Test the cameras prior to permanently mounting them by temporarily connecting the cameras and cables to your system. 2. Connect the Ethernet cable Connect one end of the Ethernet cable (for remote monitoring) to the LAN port on a rou
Краткое содержание страницы № 10
Front Panel Front Panel 1 2 3 4 8-channel model shown 1. IR Sensor: Receives the infrared signal from the remote control. 2. Function Buttons: The left set of function buttons consist of the following: • Menu: Press to enter the System Main Menu; press and hold to power off the monitor. • Mode: Switch between screen displays – full-screen, quad, and split-screen view. • Search: Search for recorded video on the HDD. • Zoom: Zoom in/out of an image using digital zoom. •
Краткое содержание страницы № 11
L19WD Series Front Panel (cont’d). 3 4 5 6 7 3. Numeric Keypad and Playback Buttons* (cont’d): • In Playback Mode, jump to start of recording • Slow motion speeds in Forward Playback: 1/4, 1/8, 1/16, and 1/32; Increase playback speed in Reverse Playback: 2X, 4X, 16X, and 32X. • Reverse playback; in Login Menu, also used as Backspace to delete digits. • Play • Pause • Stop • Increase playback speed in Forward Playback: 2X, 4X, 16X, and 32X; Slow motion
Краткое содержание страницы № 12
Rear Panel Rear Panel 1 2 3 4 5 6 7 8 9 10 1. Ethernet Port: Connects the System to a router or switch for networking purposes. 2. PS/2 Mouse: Dedicated connection for a PS/2 mouse. 3. 6-pin DIN Camera Inputs*: Channels 1~4 for 6-pin DIN cameras. Cameras with 6-pin DIN connectors draw power from the system; additional power adaptors are not required. 4. DC Input: Connects the system to the power adaptor. 5. Relay/PTZ/RS-232 Block: These terminals send a signa
Краткое содержание страницы № 13
L19WD Series Camera Installation Before you install the camera*, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the DVR. Installation Warnings • Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. • Plan the cables’ route so that it is not close to power or telephone lines, tran
Краткое содержание страницы № 14
Connecting BNC Cameras Connecting BNC Cameras 1. Connect the extension cable to the Camera and system: A. Connect the Barrel Power connector to a power adaptor. B. Connect the BNC connector to an available BNC Port on the DVR. C. Connect the Male Power connector to the Camera. D. Connect the BNC connector to the Camera. Connect to DVR and Power Adaptor 2. Connect the Power Adaptor to a wall outlet. ATTENTION: The ends of the ext
Краткое содержание страницы № 15
L19WD Series Connecting DIN Cameras* 1. Connect the female end of the extension cable (not included) to the camera. *DIN cameras are not included with this system Note: Ensure that the arrows on the DIN Camera Cable and the DIN Extension Cable point together when connecting the cable. If the pins in the DIN Cable are bent, the camera will not function. 2. Connect the male end of the extension cable to an open DIN camera input on the rear panel of the system. Not
Краткое содержание страницы № 16
Mouse Control Mouse Control This system has been designed to use a PS/2 mouse or remote control as its primary methods of navigation and configuration. Connect the mouse to the PS/2 port located on the rear panel before powering on the system. Once the unit has loaded, the mouse will be recognized by the system. Using the mouse The mouse functions in the same manner as a PC mouse. Use the left and right buttons to open menus and change options. Left Butt
Краткое содержание страницы № 17
L19WD Series Function Bar When using the mouse, the Function Bar is the primary on-screen tool for accessing and changing system settings and configurations. To open the Function Bar: Remote Control: Mouse: • Press the FUNC button. • Move the cursor over the bottom of the screen. The Function Bar contains two main components: 1. Channel Display 2. Function Icons 1 2 Channel Display Click the icon to view the status of each camera in Alarm, Cam-Loss, o
Краткое содержание страницы № 18
Mouse Control Function Icons Icon Description DISPLAY – Switches between Full-Screen, Quad, and split-screen views. CHANNEL – Click to view any channel in Full-Screen mode. AUDIO – Select an audio channel from 1~4; click OFF to turn off audio. FREEZE – Freezes the image. Press ESC to cancel Freeze Mode. SEQUENCE – Activates Sequence Mode for the connected cameras only. You can set the display view (Full-Screen, Quad, 9-split) prior to activating Sequence Mode. ZOOM – In Li
Краткое содержание страницы № 19
L19WD Series Remote Control Listed below is a quick reference for the Remote Control. 1. REC: Press REC to start Panic recording on the DVR. MENU: Press to open the System Main Menu. 1 2. DVR 1-6 – Select DVR ID for controlling multiple systems. 3. Numeric Keypad, – + – Press number buttons to cycle 2 through individual channels in full-screen mode*; Press – ,+ to cycle through display modes: full-screen, quad, eight. 3 4. FUNC – Opens and closes the Function
Краткое содержание страницы № 20
Menu Navigation Control & Tips Menu Navigation Control & Tips Using the Navigation Icons Use the Navigation Icons when navigating the system menus. • HOME Click the Home Icon while in any menu to return to the System Main Menu. • BACK Click the Back Icon to return to the previous menu. • EXIT Click the Exit Icon to exit menus. Using the Navigation Buttons When using the remote control, the Navigation Buttons are the primary way to move through the system menus. • ◄► Press the Left and
