Краткое содержание страницы № 1
English
OWNER'S MANUAL
NETWORK MONITOR
Please read the safety information carefully before using the product.
Network Monitor Model
N1910LZ
www.lg.com
Краткое содержание страницы № 2
English ENG Table of Contents 2 TABLE OF CONTENTS 3 ASSEMBLING AND 24 TROUBLESHOOTING PREPARING 3 Unpacking 26 PRODUCT SPECIFICATION 4 Parts and buttons 27 Preset Mode 6 Setting Up the Monitor set 27 Power Indicator 6 - Attaching the Stand Base 6 - Detaching the stand base 7 - Adjusting the stand height 28 PROPER POSTURE 7 - Adjusting the angle 28 Proper posture for using the monitor 8 - Mounting on a table 8 - Using the Kensington locking device 29 USING PCOIP SOLUTION 9 - Detaching the stand
Краткое содержание страницы № 3
English ENG ASSEMBLING AND PREPARING 3 ASSEMBLING AND PREPARING Unpacking Please check whether all the components are included in the box before using the product. If there are missing components, contact the retail store where you purchased the product. Note that the product and components may look different from those shown here. User Manual/Card Power Cord Adaptor 15-pin D-SUB Signal Cable Stand Base CAUTION y Only use an approved LG power adapter. y Damage caused by other power adapters i
Краткое содержание страницы № 4
English ENG ASSEMBLING AND PREPARING 4 Parts and buttons Input Connectors (See p.14 ) Power Indicator y LED On : Power is on y LED Off: Power is off (Power Button) Front Side Buttons Input Connectors (See p.11 to 14)
Краткое содержание страницы № 5
English ENG ASSEMBLING AND PREPARING 5 Button Description MENU Activates the main menu. OSD Lock/Unlock Locks/unlocks the OSD screen. Functions y To lock the OSD screen, press and hold the MENU button for several seconds. The "OSD LOCKED" message will be displayed and the screen will be locked. y To unlock the OSD screen, press and hold the MENU button again for several seconds. The "OSD UNLOCKED" message will be displayed and the screen will be unlocked. MODE Moves to the F-ENGINE and PHOT
Краткое содержание страницы № 6
English ENG ASSEMBLING AND PREPARING 6 Detaching the stand base Setting Up the Monitor set Place the monitor's screen face down. 1 Attaching the Stand Base To protect the screen from scratches, cover the Place the monitor's screen face down. surface with a soft cloth. 1 CAUTION y To protect the screen from scratches, cover Using a coin, turn the screw in the stand base 2 the surface with a soft cloth. counterclockwise. Detach the stand base from the stand body. Check the position (at the
Краткое содержание страницы № 7
English ENG ASSEMBLING AND PREPARING 7 Adjusting the stand height Adjusting the angle Place the monitor mounted on the stand base Place the monitor mounted on the stand base 1 1 in an upright position. in an upright position. 2 Remove the tape attached at the bottom rear Adjust the angle of the screen. The angle of the 2 of the stand body, then pull out the locking screen can be adjusted up to 15° forwards and 5° backwards for a comfortable viewing experi- pin. ence. Stand Body - 5 15
Краткое содержание страницы № 8
English ENG ASSEMBLING AND PREPARING 8 Mounting on a table Using the Kensington locking device Lift the monitor and place it on the table in an 1 The connector for the Kensington lock is located upright position. on the rear of the monitor. Install at least 10 cm away from the wall to For more information on installation and usage, ensure sufficient ventilation. refer to the Kensington lock user manual or visit the website at http://www.kensington.com. Connect the monitor to the table wit
Краткое содержание страницы № 9
English ENG ASSEMBLING AND PREPARING 9 Detaching the stand body Installing the wall mount plate This monitor has a VESA compatible mount on the Place the monitor's screen face down. To 1 back. Most mounts will require an LG mounting protect the screen from scratches, cover the plate. surface with a soft cloth. Using a screwdriver, remove the four screws 2 Place the monitor's screen face down. To 1 and detach the stand from the monitor. protect the screen from scratches, cover the surfac
Краткое содержание страницы № 10
English ENG ASSEMBLING AND PREPARING 10 Mounting on a wall Model N1910LZ VESA (A x B) 75 x 75 Install the monitor at least 10 cm away from the Stand Screw M4 wall and leave about 10 cm of space at each side 4 Required Screw of the monitor to ensure sufficient ventilation. De- RW120 Wall Mount Plate tailed installation instructions can be obtained from (Optional) your local retail store. Please refer to the manual to install and set up a tilting wall mounting bracket. CAUTION 10 cm y Unplu
Краткое содержание страницы № 11
English ENG USING THE MONITOR SET 11 USING THE MONITOR SET Connecting Input Signal Cable D-SUB OUT connection - PCoIP y This monitor supports the *Plug and Play feature. D-SUB OUT RGB OUT can only mirror the image displayed *Plug and Play: A feature that allows you to on the monitor. (it does not support an extended add a device to your computer, without having desktop). to reconfigure anything or install any manual drivers. Connect the monitor to the PC using the provided 15-pin D-SUB si
Краткое содержание страницы № 12
English ENG USING THE MONITOR SET 12 DVI connection - PCoIP CAUTION Transfers digital video signals to another monitor. y Connect the input signal Connect the monitor using the DVI cable as illus- cable and tighten in the trated below. direction of the arrow. To This connection is used to support an extended prevent disconnection monitor or replicate the image displayed on the secure the cable tightly. monitor. y Do not press on the screen for a prolonged time. This may cause image dist
Краткое содержание страницы № 13
English ENG USING THE MONITOR SET 13 Connecting LAN/Peripherals NOTE LAN connection - PCoIP y The LAN cable is sold separately. y The following LAN cable type can be used: The LAN connection transmits PCoIP signals to Standard: IEEE 802.3 ETHERNET the monitor. Connect the router or switch to the y When connecting the Earphone Out or Line monitor using a LAN cable as illustrated below. Out through the LAN, use the volume icon on the taskbar of your PC to adjust the volume. NOTE y Connect the
Краткое содержание страницы № 14
English ENG USING THE MONITOR SET 14 Peripheral device connection NOTE Connect peripheral devices to the monitor using y Peripheral devices are sold separately. USB, headphone, speaker, and microphone ports. y The USB ports on the left and bottom of the monitor can be used to connect the key- board, mouse, and other USB devices. y Cables with angled plugs may have clear- ance issues, use straight plugs when pos- sible. Angle Type Straight Type Left NOTE Headphones, speakers or microphone may
Краткое содержание страницы № 15
English ENG USING THE MONITOR SET 15 Self Image Adjustment Press the power button on the front to turn on the monitor. When powered on, the "Self Image Adjustment" function will run automatically (only available for analog [D-SUB input] signals). NOTE y What is "Self Image Adjustment"? This func- tion runs when the monitor is connected for the first time and performs automatic image adjustment for each signal (only available for analog [D-SUB input] signals) to provide an optimal screen d
Краткое содержание страницы № 16
English ENG CUSTOMIZING SETTINGS 16 CUSTOMIZING SETTINGS Accessing The Main Menus Press any button on the front of the monitor to display the MONITOR SETUP OSD menu. 1 2 Press to select the desired menu item. To change the settings of the selected item press the buttons on the front of the monitor. 3 To return to the upper menu or set other menu items, use the up arrow ( ) button. Select EXIT to leave the OSD menu. 4 Front Side Buttons AUTO / (See p.23) MENU (See p.17) EXIT(See p.5) Optimiz
Краткое содержание страницы № 17
English ENG CUSTOMIZING SETTINGS 17 MENU Settings Picture MENU PICTURE Press any button on the front of the monitor to dis- 1 play the MONITOR SETUP OSD menu. Press the MENU button to display the options in the 2 OSD menu. BRIGHTNESS CONTRAST 3 Set the options by pressing the buttons on the front of the monitor. SHARPNESS Select EXIT to leave the OSD menu. 4 To return to the upper menu or set other menu items, use the up arrow ( ) button. EXIT Each option is explained below. Menu Anal
Краткое содержание страницы № 18
English ENG CUSTOMIZING SETTINGS 18 Color MENU COLOR Press any button on the front of the monitor to dis- 1 play the MONITOR SETUP OSD menu. COLOR TEMP PRESET Press the MENU button to display the options in the 2 PRESET WARM OSD menu. RED 3 Set the options by pressing the buttons on the front GREEN of the monitor. BLUE GAMMA GAMMA 1 Select EXIT to leave the OSD menu. 4 To return to the upper menu or set other menu items, EXIT use the up arrow ( ) button. Each option is explained belo
Краткое содержание страницы № 19
English ENG CUSTOMIZING SETTINGS 19 Display MENU DISPLAY Press any button on the front of the monitor to dis- 1 play the MONITOR SETUP OSD menu. Press the MENU button to display the options in the 2 HORIZONTAL OSD menu. VERTICAL CLOCK Set the options by pressing the buttons on the front 3 PHASE of the monitor. Select EXIT to leave the OSD menu. 4 To return to the upper menu or set other menu items, EXIT use the up arrow ( ) button. Each option is explained below. Menu Analog PCoIP D
Краткое содержание страницы № 20
English ENG CUSTOMIZING SETTINGS 20 Others MENU OTHERS Press any button on the front of the monitor to dis- 1 play the MONITOR SETUP OSD menu. Press the MENU button to display the options in the 2 LANGUAGE English OSD menu. PCoIP ON WHITE BALANCE NO Set the options by pressing the buttons on the front 3 FACTORY RESET NO of the monitor. Select EXIT to leave the OSD menu. 4 To return to the upper menu or set other menu items, EXIT use the up arrow ( ) button. Each option is explained
