Краткое содержание страницы № 1
INSTRUCTIONS
LCD DISPLAY MONITOR
GD-19L1G
GD-17L1G
Thank you for purchasing this JVC LCD display monitor. Before using it, read
and follow all instructions carefully to take full advantage of the monitor’s
capabilities.
(* “LCD” stands for Liquid Crystal Display.)
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet. Retain this
information for future reference.
Model No. : GD-19L1G，GD-17L1G Serial No. :
Краткое содержание страницы № 2
Contents Safety Precautions.................................................................................................... 3 Installation.................................................................................................................. 6 Unpacking the Monitor................................................................................................. 6 Setup............................................................................................................
Краткое содержание страницы № 3
Safety Precautions In order to prevent any fatal accidents caused by disoperation or mishandling the monitor, be fully aware of all the following precautions. WARNINGS To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself. WARNING: THIS APPARATUS MUST BE EARTHED.
Краткое содержание страницы № 4
– in places subject to direct sunlight, – in badly ventilated places, – in automobiles with doors closed. ● Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow. ● When dust accumulates on the screen surface, clean it with a soft cloth. ● Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions: – when the power cord is frayed or the plug is damaged, – if liquid has been sp
Краткое содержание страницы № 5
Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation. By disposing of this product correctly, you
Краткое содержание страницы № 6
Installation Please follow the instructions in this chapter to install your LCD Monitor. Note: Before connecting your monitor, first read through the instructions in this chapter and the safety precautions in the previous chapter. Unpacking the Monitor When you are unpacking the monitor, make sure that you have the following items: The LCD monitor AC power cord Analog video signal cable Remote control Battery x 2 BNC-RCA adaptor This instruction book Note: Place the mon
Краткое содержание страницы № 7
Installation on wall This monitor can be installed on walls with Wall Mounting Unit (TS-CV10WG) made by JVC of another sales. Moreover, another wall mounting unit, in accordance with VESA standard on markets can be also used. Note： ● Please request the installation on the wall to a special engineer. VESA mounting holes When installing a wall mounting unit in the rear of the monitor , detach the stand according to the following procedure. 1. Detach the hinge cover
Краткое содержание страницы № 8
Controls and Features 9 8 7 1 2 3 4 5 6 Press these buttons to adjust the sound volume. 1 □ '＋' and '－' buttons When a menu appears, use these buttons for menu operation. (see page 12). 2 Use this button for menu operation. (See page 12) □ ‘MENU’ button 3 □ Down ( ▼ ) button Use this button for menu operation. (See page 12) Use this button for menu operation. (See page 12) 4 □ Up ( ▲ ) button Starts the "AUTO ADJUST" in the PC mode when
Краткое содержание страницы № 9
To AC outlet 17 (120 V AC, For U.S.A. and Canada 50 H z/60 Hz) To AC outlet (220~240 V AC, 17 50 Hz/60 Hz) For Europe and Asia 17 For the United Kingdom 14 10 11 12 13 15 16 18 10 Connect the provided AC power cord 17 to this inlet. Then connect the AC □ AC inlet power cord 17 to the AC outlet (120V AC or 220~240V AC, 50Hz/60Hz) You can connect this monitor to your PC. 11 □ PC input terminal Before using this terminal, please see the "Video Modes (A
Краткое содержание страницы № 10
Remote control buttons and functions ‘POWER ON’ button Turns the monitor on. 1 ‘POWER OFF’ Turns the monitor off (standby). 2 button ‘PC’ button Selects the PC input. 3 ‘COMPO.’ button Selects the Component (Y/B-Y/R-Y) input. 4 ‘Y/C’ (S-video) Selects the Y/C (S-video) input. 5 button ‘VIDEO’ button Selects the Video input. 6 ‘MUTING’ button Mutes the sound. 7 ‘SELECT’ button Use this button for menu operation. 8 (See page 12) ‘MENU’ button Use t
Краткое содержание страницы № 11
Using Your Monitor This chapter contains information about using your LCD Monitor. Turning the Monitor On and Off Use the power ( ) button on the monitor or POWER button on the remote control to turn the monitor on and off. When the monitor is on, the Power indicator near the Power ( ) button lights in green. When no video signal is input or the input signal is out of range, the Power indicator blinks in amber. Note: Because of the technology used in LCD panels, screen savers will n
Краткое содержание страницы № 12
Using the Menu This chapter contains information about how to change monitor settings for your LCD Monitor. It is designed with an menu to help you easily adjust to its optimum performance. Note: In the PC mode, do the “AUTO ADJUST” setting first, before adjusting any settings. For details, see “AUTO ADJUST” on page 17. Menu Operation 1. Display the main menu With the remote control: Press the ‘MENU’ button. ・ To exit the main menu, press the ‘MENU’ button again. With the control
Краткое содержание страницы № 13
PICTURE ADJ. SHARPNESS SOFT 1 2 3 4 5 SHARP Note：If the item do not have the sub-menu, go to step 4. 4. Adjust the item or change setting of the item. With the remote control: Press the ‘＋’ or ‘－’ button. With the control buttons on the front panel: Press the ‘＋’ or ‘－’ button. Notes： You can change the indication time of the menu. For details, see “INDICATION TIME” on page15. ・ When no menu appears, pressing the ‘UP( ▲)’ button will start “AUTO ADJUST” (page.17
Краткое содержание страницы № 14
LUMINANCE menu LUMINANCE BACK LIGHT 80 CONTRAST 50 Exit BACK LIGHT： You can adjust the light output of the backlight. CONTRAST： You can adjust the contrast of the picture. Exit：You can return to the main menu. PICTURE ADJ. menu PICTURE ADJ. PHASE 50 CHROMA 50 SHARPNESS 3 Exit PHASE：You can adjust the picture hue. CHROMA：You can adjust the picture color density. SHARPNESS：You can adjust the screen sharpness. Exit：You can return to the main menu. POSITIO
Краткое содержание страницы № 15
COLOR TEMP. menu COLOR TEMP. HIGH MID. LOW USER Exit Choose one of four Color temperature settings; HIGH, MID., LOW and USER. Exit：You can return to the main menu. “USER” setting: You can adjust the "USER" setting. 1. Choose "USER", and then press 'SELECT' button or ‘＋’ or ‘－' button to display the sub-menu. COLOR TEMP. USER RED 50 GREEN 50 BLUE 50 Exit 2. Press ‘Up( ▲)’ or ‘Down( ▼)’ button to choose “RED”, and then press 'SELECT' b
Краткое содержание страницы № 16
FUNCTION SEL. menu FUNCTION SEL. STATUS DISPLAY AUTO INPUT INFORMATION CONTROL LOCK OFF Exit STATUS DISPLAY：If "STATUS DISPLAY" is set to "AUTO", the status information will appears when changing input or turning the monitor on. If it is set to "OFF", no information appears. INPUT INFORMATION：You can confirm the current status. In the Video mode: Color system and vertical frequency In the PC mode: Resolution and vertical frequency CONTROL LOCK：You can disable the control bu
Краткое содержание страницы № 17
Using the Monitor in the PC mode Since the inherent format of this monitor is 1280 pixels by 1024 lines, the monitor will perform best when your PC is set to a screen resolution of 1280 x 1024. If you use a lower resolution (such as 640 x 480), the image is expanded to fill the screen. Your monitor supports many common video modes, as shown in “Video Modes” on page 24. Check the manuals supplied with your PC and video adapter card to find out which modes they support. To see what the vide
Краткое содержание страницы № 18
The menu flowchart of the Video mode *The menu can not be displayed when "NO SYNC" is displayed. 18
Краткое содержание страницы № 19
The menu flowchart of the PC mode *The menu cannot be displayed when "NO SYNC" is displayed. 19 ENGLISH
Краткое содержание страницы № 20
Basic Connection Example Notes: ・ Before connecting your system, make sure that all devices are turned off. ・ The illustration shows some examples of different connections. Terminal connections may differ depending on the devices. Be sure to refer to the manuals provided with the devices. Video Camera Video Camera Video Camera Video Camera PC PC Analog RGB Stereo audio VCR VCR VCR VCR output output (Component input) (
