Краткое содержание страницы № 1
USER MANUAL
Thank you very much for choosing the iiyama LCD monitor.
We recommend that you take a few minutes to read carefully
through this brief but comprehensive manual before
installing and switching on the monitor. Please keep this
manual in a safe place for your future reference.
Краткое содержание страницы № 2
FCC DECLARATION OF CONFORMITY Model Number: PLL400W Trade Name: iiyama Responsible party: IIYAMA North America, Inc. Address: 65 West Street Road, Suite 101B, Warminster, PA18974 U.S.A. Telephone number: 215-682-9050 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This de
Краткое содержание страницы № 3
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MON
Краткое содержание страницы № 4
Краткое содержание страницы № 5
BEFORE YOU OPERATE THE MONITOR FEATURES 40" Wide TFT Color LCD Monitor Supports Resolutions up to 1280 × 1024 (down scale) Super Wide Viewing Angle and High Contrast Digital Character Smoothing Automatic Set-up ® Plug & Play VESA DDC2B Compliant, Windows 95/98/2000/Me/XP Compliant ® Power Management (ENERGY STAR and VESA DPMS Compliant) Digital Input for Clear Display CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they
Краткое содержание страницы № 6
Краткое содержание страницы № 7
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable. (See page 16 for CONNECTOR PIN ASSIGNMENT.) B Connect the RS-232C cable to the computer while using the RS-232C control feature. (See page 16 for CONNECTOR PIN ASSIGNMENT.) C Connect the Power Cable to the monitor first and then to the power supply. D NOTE The signal cables used for connecting the computer and monitor may vary with the type of com
Краткое содержание страницы № 8
BASIC OPERATION Turn on the monitor Press the Main Power Switch on the monitor. The monitor is turned ON [ Remote Control ] when you press the Power Switch on the monitor or the Remote Control. Press the Power Switch. Press again to turn OFF the monitor. [ Monitor ] Press the Power Switch. Even when using the power management mode, the monitor consumes electricity. Turn off the NOTE Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consu
Краткое содержание страницы № 9
Краткое содержание страницы № 10
Краткое содержание страницы № 11
Menu : 3 Menu:3 (Analog) OSD -+ 1280 768 H: 44 KHz V: 56 Hz Adjustment Item Problem / Option Button to Press Input 1 Select the INPUT 1. Signal Select 1 * Optional input only, see APPENDIX B. Select the INPUT 2. Input 2 1 Select the VIDEO input. Video 1* Direct Direct 1 Video 2* Select the S VIDEO input. You can skip the Menu pages and display an 1 2 3 4 5 OSD Position or adjustment scale directly by using the following button operations. You can mo
Краткое содержание страницы № 12
Digital Input Menu : 1 Menu:1 (Digital) 1280 × 768 H: 44 KHz V: 56 Hz Adjustment Item Problem / Option Button to Press Too dark 1 * Adjust the Brightness when you are using 1 or Brightness * Direct Too bright the monitor in a dark room and feel the Too dull screen is too bright. or Contrast Direct Too intense Color1 Approx. 9300K Color Temp. Color2 Approx. 7500K Direct Red User Too dull You can skip the Menu pages and display an or Green Too intense adjustment scale dir
Краткое содержание страницы № 13
Menu : 2 Menu:2 (Digital) OSD -+ 1280 × 768 H: 44 KHz V: 56 Hz Adjustment Item Problem / Option Button to Press Input 1 Select the INPUT 1. Signal Select 1 * Optional input only, see APPENDIX B. Select the INPUT 2. Input 2 1 Select the VIDEO input. Video 1* Direct Direct 1 Video 2* Select the S VIDEO input. You can skip the Menu pages and display an 1 2 3 4 5 OSD Position or adjustment scale directly by using the following button operations. You can
Краткое содержание страницы № 14
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1280 × 768, but can not provide the best at resolution s of less than 1280 × 768 because the picture is automatically stretched to fit the full screen
Краткое содержание страницы № 15
2) Stretch the right side of the picture frame to the right edge of the display area by adjusting the Clock. or NOTE When the left side of the picture frame moves apart from the left edge of the display area during the Clock adjustment, adjust steps 1) and 2). Another way to make the Clock adjustment is to correct the vertical wavy lines in the zebra pattern. The picture may flicker during the Clock, H-Position and V-Position adjustment. In case the picture frame is bigger or smaller tha
Краткое содержание страницы № 16
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, di
Краткое содержание страницы № 17
APPENDIX A SPECIFICATIONS LCD Panel Driving system a-Si TFT Active Matrix Size Diagonal: 102cm / 40" Pixel pitch 0.681mm H × 0.681mm V 2 Brightness 450cd/m (Typical) Contrast ratio 600 : 1 (Typical) Viewable angle Right / Left / Up / Down: 85 degrees each Response time 23ms (Black, white, black) Display Colors 16,777,216 maximum Sync Frequency Horizontal: 31.47-60.24kHz, Vertical: 56-75Hz Dot Clock 102.98MHz maximum Maximum Resolution 1280 × 768 Input Connector D-SUB mini 15pin (ANALOG) DVI-D 2
Краткое содержание страницы № 18
COMPLIANT TIMING Horizontal Vertical Video Mode Dot Clock Frequency Frequency 31.469kHz 59.940Hz 25.175MHz VGA 640 × 480 37.861kHz 72.809Hz 31.500MHz 37.500kHz 75.000Hz 31.500MHz 37.879kHz 60.317Hz 40.000MHz SVGA 800 × 600 48.077kHz 72.188Hz 50.000MHz 46.875kHz 75.000Hz 49.500MHz VESA 48.363kHz 60.004Hz 65.000MHz XGA 1024 × 768 56.476kHz 70.069Hz 75.000MHz 60.023kHz 75.029Hz 78.750MHz 44.409kHz 56.000Hz 73.895MHz WXGA 1280 × 768 47.701kHz 60.000Hz 80.136MHz 60.150kHz 75.000Hz 102.977MHz VGA TEXT
Краткое содержание страницы № 19
RS-232C INTERFACE Baud Rate 9600bps Data Format Start: 1-bit Data: 8-bit Parity: 0 (no Parity) Stop: 1-bit Command Command Name Function Turn off power POF PON Turn on power NOTE Transmit POF and PON commands one by one. Allow an interval of 20 or more seconds between commands. Protocol STX(02hex) ID(2Byte) COMMAND(3Byte) ETX(03hex) COMMAND 3Byte(ASCII) APPENDIX A 17
Краткое содержание страницы № 20
APPENDIX B Optional Video Input This OSD Menu is available only when the optional video adapter is installed in the monitor. Video input is not selected automatically from Analog or Digital input. Switch to video input by “Signal Select” on OSD Menu or the Input Button. Under the power management mode, “Signal Select” page is displayed directly by pressing the Menu Button when the Menu is not displayed. Menu : 1 (Video) Menu:1 H: 16 KHz V: 60 Hz NTSC 1 * Adjust the Brightness and Contrast so Ad
