Краткое содержание страницы № 1
HP TFT7210R
User Guide
Part Number 349953-002
August 2007 (Second Edition)
Краткое содержание страницы № 2
© Copyright 2003, 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Краткое содержание страницы № 3
Contents Component identification............................................................................................................... 5 Front Panel LEDs and Buttons ...................................................................................................................... 5 Installation ................................................................................................................................... 6 Installation Checklist ...........................
Краткое содержание страницы № 4
Regulatory compliance notices ..................................................................................................... 26 Regulatory compliance identification numbers............................................................................................. 26 Federal Communications Commission notice............................................................................................... 26 FCC rating label................................................................
Краткое содержание страницы № 5
Component identification Front Panel LEDs and Buttons Item Description Function 1 Power On/Off button Powers the monitor on and off. 2 Power Indicator LED Indicates the power states of the HP TFT7210R. • Green—full power • Amber—Sleep mode (on page 11) and Input Signal Out of Range (on page 11) 3 Plus (+) button Scrolls up in the OSD menus and adjusts the functions. 4 Minus (-) button Scrolls down in the OSD menus and adjusts the functions. 5 Menu Select button Launches the f
Краткое содержание страницы № 6
Installation Installation Checklist Before installation, refer to the following list to be sure that all of the listed components were received. Kit contents • HP TFT7210R • HP 1U Adjustable Toolless Rails • Brace rail assembly o Brace rail o Cable management arm • Lock plates • M6 screws • 6-32 screws • High-voltage power cord (10 ft), C13-C14 This kit might contain extra hardware for your convenience. Installing the HP TFT7210R 1. Align the lower edge of the rack template
Краткое содержание страницы № 7
3. Extend the inner slides until they lock into place. 4. Align the HP TFT7210R with the extended inner slides, and pull the release mechanisms toward you while inserting the HP TFT7210R into the rack. WARNING: To reduce the risk of personal injury, release the release mechanisms after pushing the HP TFT7210R slightly forward. 5. Slide the brace rail assembly into the HP 1U Adjustable Toolless Rails from the rear of the rack, ensuring that the cable access hole faces the
Краткое содержание страницы № 8
6. Align the screw holes on the brace rail with the screw holes on the HP 1U Adjustable Toolless Rails. Installation 8
Краткое содержание страницы № 9
7. Secure the brace rail to the HP 1U Adjustable Toolless Rails by inserting three screws and tightening them. Installation 9
Краткое содержание страницы № 10
8. Attach the cable management arm to the rear of the HP TFT7210R with two screws. 9. Route the cables and plug in the HP TFT7210R. Installation 10
Краткое содержание страницы № 11
Operational overview Powering On and Off the HP TFT7210R Press the Power On/Off button. Accessing the OSD main menu 1. Press the Menu Select button on the front panel ("Front Panel LEDs and Buttons" on page 5). The OSD Main menu appears and the default settings are shown when first accessing this menu. 2. Scroll down by pressing the Minus (-) button, or scroll up by pressing Plus (+) button. 3. Press the Menu Select button to activate the highlighted menu item. If the Menu Select, Mi
Краткое содержание страницы № 12
OSD main menu functions Auto Setup When selected, the Auto Setup menu activates the Image Control process and performs four functions automatically: • Auto Level—Automatically adjusts the black and white levels of the display • Auto Position—Automatically adjusts the position of the display • Auto Phase—Automatically adjusts the phase • Auto Clock—Adjusts the output clock per line to match input Brightness When selected, the Brightness menu activates the Brightness Adjustment screen
Краткое содержание страницы № 13
• Exit Within the menu: • Plus (+) moves up a selection. • Minus (-) moves down a selection. • Menu Select activates one of the actions. Horizontal Position When selected, a slider bar appears to allow the adjustment of the display horizontal position. • Plus (+) moves window to the right. • Minus (-) moves the window to the left. • Menu Select accepts the location and exits back to the sub-menu. Vertical Position When selected, a slider bar appears to allow the adjustment of th
Краткое содержание страницы № 14
• Plus (+) moves up a selection. • Minus (-) moves down a selection. • Menu Select activates one of the actions. Color Temp The Color Temp menu contains the following choices: • Cool—A Gamma table for Cool temperatures loads all three-color channels • Neutral—A Gamma table for Neutral temperatures loads all three-color channels • Warm—A Gamma table for Warm temperatures loads all three-color channels • Exit Within the menu: • Plus (+) moves up a selection and activates that choice.
Краткое содержание страницы № 15
RGB Adjust Blue When selected, a slider bar appears to allow the adjustment of the Blue color in the display. • Plus (+) increases the current value. • Minus (-) decreases the current value. • Menu Select accepts the current value and exits the slider bar. Black Level Adjust The Black Level Adjust menu contains the following sub-menus: • Black Level Adjust Red (on page 15) • Black Level Adjust Green (on page 15) • Black Level Adjust Blue (on page 15) • Exit Within the menu: • Plu
Краткое содержание страницы № 16
• Phase Adjust (on page 16) • Clock Adjust (on page 16) • Exit Within the menu: • Plus (+) moves up a selection. • Minus (-) moves down a selection. • Menu Select activates one of the actions. Phase Adjust When selected, a slider bar appears to allow the adjustment of the analog phase signal. • Plus (+) increases the current value. • Minus (-) decreases the current value. • Menu Select accepts the current value and exits the slider bar. Clock Adjust When selected, a slider bar
Краткое содержание страницы № 17
OSD Settings The OSD Settings menu contains the following sub-menus: • OSD Position (on page 17) • OSD Size (on page 18) • OSD Timeout (on page 18) • Exit Within the menu: • Plus (+) moves up a selection. • Minus (-) moves down a selection. • Menu Select activates one of the actions. OSD Position The OSD Position menu contains the following sub-menus: • OSD Horizontal Position (on page 17) • OSD Vertical Position (on page 17) • Exit Within the menu: • Plus (+) moves up a sele
Краткое содержание страницы № 18
OSD Size The OSD Size menu contains the following choices: • OSD Size Normal—Sets the character to normal size • OSD Size Double—Sets the character to double size Within the menu: • Plus (+) moves up a selection and activates that choice. • Minus (-) moves down a selection and activates that choice. • Menu Select exits, leaving the last selection as the new default. OSD Timeout The OSD Timeout menu allows the adjustment of the OSD Timeout feature. The timeout ranges from 5 to 55 se
Краткое содержание страницы № 19
• Micro Code Version • Exit OSD main menu functions 19
Краткое содержание страницы № 20
Maintenance Maintenance guidelines To protect the HP TFT7210R from overheating and other types of damage: • Use only a power source and connection appropriate for the HP TFT7210R, as indicated on the agency label. • If an extension cord or power strip is used, be sure that the cord or strip is rated for the product. Also, be sure that the total ampere ratings of all products plugged into the extension cord or power strip do not exceed 80% of the extension cord or strip ampere ratings la
