Краткое содержание страницы № 1
Touchmonitor User Guide
1739L 17¨ LCD Rear-mount Touchmonitor
3000 Series
Revision A
Краткое содержание страницы № 2
User Guide 17" LCD REAR-MOUNT TOUCHMONITOR 1739L Family 3000 Series Revision A P/N E247574
Краткое содержание страницы № 3
Copyright © 2006 Tyco Electronics Corporation. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written per- mission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems
Краткое содержание страницы № 4
Table of Contents Chapter 1 Regulatory Information 33 Introduction 7 Warranty 37 Product Description ...................................................7 Precautions ................................................................7 Index 39 About the Product ......................................................8 Chapter 2 Installation and Setup 9 Unpacking Your Touchmonitor...................................9 Touch Interface Connection .......................................10 Product Overview
Краткое содержание страницы № 5
C H A P T E R 1 INTRODUCTION Product Description Your new touchmonitor combines the reliable performance of touch technology with the latest advances in (LCD) display design. This combination of features creates a natural flow of informa- tion between a user and your touchmonitor. This LCD monitor incorporates a 17” color active matrix thin-film-transistor (TFT) to provide superior display performance. A maximum resolution of SXGA 1280x1024 is ideal for displaying graphics and images. Other outs
Краткое содержание страницы № 6
About the Product Your LCD rear-mount touchmonitor is a 17” SXGA TFT color display with the following features: The internal microprocessor digitally controls auto-scanning for horizontal scan frequencies between 31.5 KHz and 80 KHz, and vertical scan frequencies between 56.3 Hz and 75.0 Hz. In each frequency mode, the microprocessor-based circuitry allows the monitor to function at the precision-of a fixed frequency. High contrast color TFT LCD display supports resolutions up to SXGA 1280x1
Краткое содержание страницы № 7
C H A P T E R 2 INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install the driver software. Unpacking Your Touchmonitor Check that the following 9 items are present and in good condition: LCD monitor Video cable USB cable Serial cable European power cable Power cable US/Canada Touch Tools CD+Quick Install Guide Brick power supply 2-9
Краткое содержание страницы № 8
Touch Interface Connection Note: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 3 1 2 2 Adapter Video Cable Serial Cable USB Cable 1. Connect one end of the power adapter to the monitor and the other end to the connector of the power cord. 2. Connect one end of either the touchscreen serial (RS232) cable or the touchscreen USB cable (but not both) to the rear side of the computer and the other end to the LCD monitor. Tighten b
Краткое содержание страницы № 9
Product Overview Main Unit Rear View 2-11
Краткое содержание страницы № 10
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows XP Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 The latest versions of drivers and driver information for other operating systems are available on the Elo TouchSystems web site at www.elotouch.com. Your Elo touchmonitor is Plug-and-Play compliant. Infor
Краткое содержание страницы № 11
Installing the Serial Touch Driver Installing the Serial Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer's CD-ROM drive. 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. 3 Follow the directions on the screen to complete the driver setup for your version of Window
Краткое содержание страницы № 12
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert the CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD- ROM drive may be mapped to a different drive letter). 3 Type ins
Краткое содержание страницы № 13
Installing the USB Touch Driver Installing the USB Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows 98, Windows Me or Windows 2000 starts the Add New Hardware Wizard. 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next. 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use Browse to select the \EloUSB directory on the Elo CD-R
Краткое содержание страницы № 14
2-16 User Guide
Краткое содержание страницы № 15
C H A P T E R 3 OPERATION About Touchmonitor Adjustments Your touchmonitor will not likely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1280 x 1024 at 80k-75 Hz. Use the Display control panel in Windows to choose 1280 x 1024 resolution. Operating in other resolutions will degrade video performance. For fur
Краткое содержание страницы № 16
Rear Panel Controls SEL MENU 12 3 4 5 Control Function 1 Menu/Exit Display/exits the On Screen Display (OSD) menus. 2 1. Enter contrast of the OSD. 2. Increase value of the adjustment item. 3. Select item counter-clockwise. 3 1. Enter brightness adjustment. 2. Decrease value of the adjustment item. 3. Select item clockwise. 4 Select Selects the adjustment items from the OSD menus. 5 Power Switch Switches the power of the monitor. 3-18 User Guide
Краткое содержание страницы № 17
Controls and Adjustment On Screen Display (OSD) Menu Functions To Display and Select the OSD Functions: 1 Press the Menu key to activate the OSD menu. 2 Use or to move through the menu. Press the Select key, the parameter will be highlighted when selected. 3 To quit the OSD screen at any time during the operation, press the Menu key. If no keys are pressed for a short time period, the OSD automatically disappears. NOTE: The OSD screen will disappear if no input activities are detected
Краткое содержание страницы № 18
On Screen Display (OSD) Control Options Control Description Contrast Increases or decreases contrast. Brightness Increases or decreases brightness. V-Position Moves the screen up or down. H-Position Moves the screen left or right. Recall Defaults Returns the monitor to its default settings. RGB Press or to select 9300, 6500, 5500, 7500 and USER. Only when selecting USER can you make adjustments to the R/G/B content. Press Enter to restore to factory default setting. Exit Exit the menu.
Краткое содержание страницы № 19
Preset Modes To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. If any of these display modes are detected, the monitor automatically adjusts the picture size and centering. When no mode is matched, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 7 user modes. The only condition to store as a user mode is the new display information must have 1 KH
Краткое содержание страницы № 20
Power Management System The monitor is equipped with the power management function which automatically reduces the power consumption when not in use. Power Mode Consumption On <40W Sleep <4W Off <2W We recommend switching the monitor off when it is not in use for a long time. NOTE: The monitor automatically goes through the Power Management System (PMS) steps when it is idle. To activate the monitor, press any key on the keyboard or move the mouse. 3-22 User Guide
