Краткое содержание страницы № 1
English
User's Manual
®
F67/FX·D7
T68/TX·D7
Color Display Monitor
Краткое содержание страницы № 2
CONTENTS PRECAUTIONS__________________________ 4 INTRODUCTION _________________________ 9 About This Manual ................................................... 9 Package Contents ................................................... 9 1 INSTALLATION ______________________ 10 1-1 Controls & Connectors .................................... 10 Front ................................................................................. 10 Rear ................................................................
Краткое содержание страницы № 3
2-5 Other Settings ................................................. 33 E Degaussing ..................................................................... 33 Input Priority .................................................................... 33 Beep ................................................................................ 34 Menu Position, Menu Contrast ........................................ 35 Signal Filter ..................................................................... 35 Reset
Краткое содержание страницы № 4
PRECAUTIONS IMPORTANT! * This product has been adjusted specifically for use in the region to which it was originally shipped. The performance of the product, (i.e. picture geometry, picture positioning and color convergence and purity in the case of color monitors) is optimally adjusted to the earth's magnetic field of the specific destination. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. * The manufacturer is
Краткое содержание страницы № 5
WARNING E • If the monitor begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning monitor can be dangerous. • Do not dismantle the cabinet or modify the monitor. Dismantling the cabinet or modifying the monitor may result in electric shock or burn. • Keep small objects away from the monitor. Small objects may accidentally fall through the ventilation slots
Краткое содержание страницы № 6
• Use the enclosed power cord. If using the power cord other than the enclosed one, use the following cord. In USA and Canada: *Rating: min. 125 V, 10 A *Length: max. 2.1 m *Type: SVT *Plug type:NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A In Europe: *Rating: min. 250 V, 10 A *Length: max. 2.1 m 2 *Type: H05VV-F 3G 1 mm Use a plug type approved by the country where you use. Failure to do so may cause fire or electric shock. • Do not overload your power circuit, as this may result in
Краткое содержание страницы № 7
• Handle with care when carrying the monitor Note that the monitor is heavier at the front than at the rear. Do E not move it alone. Always work with another person. The screen is optically coated to reduce glare. Keep hard objects OK (such as buttons, tie pins, and other clothing accessories) away from the screen surface to prevent scratches. • Set the monitor in an appropriate location. *Do not install in a dusty or humid environment. *Do not place in a location where light shines directly
Краткое содержание страницы № 8
For users of the EIZO optional i·Sound sound unit and i·Station USB hub • When adjusting the viewing angle of the monitor, do not do so by handling the sound unit or USB hub. Adjusting the monitor in this way may break the unit or cause bodily injury. Others • Do not install the monitor within an area subject to strong magnetic fields (for example, in the vicinity of a speaker, except the optional i·Sound unit, or a high-voltage transformer). Magnetic fields can cause noise, ima
Краткое содержание страницы № 9
INTRODUCTION About This Manual E This manual explains the precautions, features, specifications, and operation of your EIZO monitor. For convenience, a “ScreenManager Quick Reference” guide has been included which shows how to implement basic adjustments with the ScreenManager utility. • This manual applies to the EIZO monitor models: T68, TX·D7, F67 and FX·D7. Please note that there are some points which vary according to the model. Package Contents: Monitor Power Cord Signal Cable EIZO USB C
Краткое содержание страницы № 10
1 INSTALLATION 1-1 Controls & Connectors Front (1) ScreenManager menu The ScreenManager is used to adjust the image of the monitor. Adjust- ments are made using the Control Pad (6) shown in diagram. See page 14 for further details. (2) USB port with a drop down access lid (Downstream port x 1) See page 44 for further details. (3) BNC/D-SUB selection button Selects BNC or D-Sub connector as active input. This feature is only used when two computers are connected to the monitor. (4) AUTO-SIZING b
Краткое содержание страницы № 11
(7) Power indicator Indicates the power-on status, as follows: E Solid green: Power is ON (normal mode) Flashing green: PowerManager Mode 1 (power-saving mode) Yellow: PowerManager Mode 2 (maximum power-saving) (8)Power switch Switches the monitor’s power ON and OFF. Rear (1)Power connector Use the supplied power cord only. (2)D-Sub mini 15 pin input connector (3)BNC input connector (4) Termination switch Allows multiple monitors to be chained together (Default termination is 75 Ω). (5) Maintena
Краткое содержание страницы № 12
1-2 Connecting the monitor to the PC 1) Be sure that the power switches of both the PC and the monitor are OFF. 2) Plug the power cord into the power connector at the rear of the monitor. Then plug the other end of the cord into a power outlet. 3) Plug the signal cable into the connector at the rear of the monitor. • When connecting the signal cable or cable adapter, first check that the shape at the cable side matches the shape at the connecting side. After connecting, secure the connection wit
Краткое содержание страницы № 13
Macintosh E You must connect an optional Macintosh adapter to the PC before connecting the signal cable. D-Sub 15 pin D-Sub D-Sub mini 15 pin Macintosh mini 15 pin MD-C87 (enclosed) Macintosh Adapter (Optional) 5) Turn on the monitor power first, then switch on the PC power. The monitor’s power indicator (LED) will light up (green). The monitor will warm up briefly, then display an image. Whenever you finish your operation, turn off the PC and the monitor. • If an image does not appear, make
Краткое содержание страницы № 14
2 SCREEN ADJUSTMENT 2-1 How to use the ScreenManager ScreenManager Menus ScreenManager consists of a main menu and six sub menus: “Screen”, “Color”, “PowerManager”, “Others”, “Information” and “Language.” Animated icons on each menu allow for easy adjustment. Main menu • The menu message for the ScreenManager can be displayed in six languages: English, German, French, Italian, Spanish and Swedish. First, select the preferred language through the “Language” menu. This will become the default l
Краткое содержание страницы № 15
Menus Functions Reference E Page 28 Power saving settings. Page 33 Degauss, Input-signal priority selection for two signal connections, Beep ON/OFF, ScreenManager menu position, Contrast adjustment, Signal filter setting and Reset to defaults. This menu shows the current ScreenManager settings. The menu contains four pages. Pressing the ENTER key displays the following information: • Page 1: Input port, horizontal and vertical frequencies, moiré reduction
Краткое содержание страницы № 16
Press the ENTER key to display the ScreenManager Main menu. Enter the Settings Use the Control pad (the four arrow keys and the ENTER key) to make the required adjustments and settings. ENTER key Arrow keys Save & Exit To return to the previous menu, select the Return icon (or push the “down” arrow key twice), then push the ENTER key. To save settings and exit the ScreenManager, select the Exit icon and press the ENTER key. Shortcut Keys 16 2 SCREEN ADJUSTMENT
Краткое содержание страницы № 17
Before entering the ScreenManager, brightness and contrast can be E adjusted directly by moving the Control pad. To record the new setting and exit the ScreenManager, press the Enter key. (The brightness and contrast functions are also available in the ScreenManager “Screen” menu.) See the diagram described below for adjustment directions. Brightness Up Contrast Contrast Down Up Brightness Down 2 SCREEN ADJUSTMENT 17
Краткое содержание страницы № 18
2-2 Imaging adjustment Using the AUTO-SIZING button After connecting the monitor to the PC, first press the AUTO-SIZING button on the front panel. The AUTO-SIZING function centers the displayed image, aligning the image’s borders with respect to the monitor frame. In general, press the AUTO-SIZING button whenever changing the graphics board or the resolution or when image size and/or position is incorrect. If further adjustment is required, adjust the picture size/position as desired using the
Краткое содержание страницы № 19
- Screen menu - E All of the icons shown in the ScreenManager “Screen” menu are described below. • Allow the monitor to stabilize for at least 30 minutes before making image adjustments. Brightness, Contrast, Size, Position These functions are used to adjust the brightness, contrast, size and position of the screen. Proper adjusting for brightness & contrast 1) Set the brightness and contrast to their maximum settings. 2) Set the display area to the minimum size. A black-and-white back- ground
Краткое содержание страницы № 20
• If you use the white text against a black background like DOS text, we recommend that you set the brightness to its maximum setting because the dark setting will result in eye strain due to high character contrast. Geometry, Tilt, Uniformity Image distortion, tilting and/or the imbalance of brightness/whiteness over the entire screen may be caused by the Earth’s magnetic field depending on the direction the monitor is facing. Use the “Screen” menu’s geometry (Side-Pincushion, Side-Pin Balance
