Краткое содержание страницы № 1
SAFETY SYMBOLS
PRECAUTIONS
1. Introduction
1-1. Features
1-2. Package Contents
1-3. Controls &
Connectors
2. CABLE CONNECTION
2-1. Before Connecting
2-2. Connecting the
Signal Cable
2-3. Connecting Two PCs
to the Monitor
2-4. Sound Connections
3. ScreenManager
3-1. How to use the
ScreenManager
This manual is checked under the browser settings
3-2. ScreenManager
shown below. Text size can change for another one
Adjustments and Settings
through browser setting.
3-3. FineContrast
Microsoft
Краткое содержание страницы № 2
APPENDIX/ANHANG/ANNEXE About TCO'03 (Applicable white) About TCO'99 (Applicable black and silver) FCC Declaration of Conformity Hinweis zur Ergonomie / Recycle Auskunft / Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Краткое содержание страницы № 3
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2004 EIZO NANAO CORPORATION All rights reserved
Краткое содержание страницы № 4
PRECAUTIONS IMPORTANT! ● This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. ● To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of the Caution Statements] If the unit begins to emit smoke, smells lik
Краткое содержание страницы № 5
Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. Place the unit at the strong and stable place. A unit placed on an inadequate surface may fall and result in inju
Краткое содержание страницы № 6
Use the correct voltage. ● The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User's Manual may cause fire, electric shock, or equipment damage. ● Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord with care. ● Do not place the cord underneath the unit or other heavy objects. ● Do not pull on or tie the cord. If the power cord becomes damaged, stop using it. Us
Краткое содержание страницы № 7
When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. ● Do not place any objects on the ventilation slots. ● Do not install the unit in a closed space. ● Do not use the unit laid down or upside down. Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equi
Краткое содержание страницы № 8
product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or damage your LCD panel. Leave the screen white to decrease the prints. When the screen image
Краткое содержание страницы № 9
1. Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features ● Dual inputs compliant (DVI-D and D-Sub mini 15 pin connecters) ● DVI Digital input (TMDS) compliant ● [Horizontal scanning frequency] Analog: 24.8 - 80 kHz Digital: 31 - 64 kHz [Vertical scanning frequency] Analog: 50 - 75 Hz Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz) [Resolution] 1280 dots x 1024 lines ● Auto Screen Adjustment function incorporate ● FineContrast modes, to select the most
Краткое содержание страницы № 10
● Stereo mini-jack Cable (2 pcs) ● Please retain the packing materials for future transference. 1-3. Controls & Connectors Front (1) Sensor* 1 (2) Speaker (3) ScreenManager ® (4) Input Signal Selection Button (5) Mode Button* 2 (6) Auto Adjustment Button (7) Enter Button (8) Control Buttons (Left, Down, Up, Right) (9) BrightRegulator Button* 1 * 2 (10) Power Button (11) Power Indicator* 3 Blue Operation Yellow Power saving
Краткое содержание страницы № 11
Off Power off *1 When using the BrightRegulator function, the sensor detects the surrounding brightness. Refer to Bright Regulator Function. *2 Directly pressing the Mode button allows you to select a FineContrast Mode. The ScreenManager Main Menu and the FineContrast/BrightRegulator Menu cannot be displayed at the same time. *3 Regarding the power indicator for the "Off Timer", see Off Timer function. Rear and Side (12) USB Downstream port (13) Security Lock Slot* 4 (14) ArcSwing Stand *
Краткое содержание страницы № 12
*4 Allows for connection of a security cable. This lock supports Kensington's MicroSaver security system. For further information, please consult: Kensington Technology Group 2855 Campus Drive, San Mateo, CA 94403 USA Tel.: 800-650-4242, x3348, Intl: 650-572-2700, x3348 Fax: 650-572-9675 http://www.kensington.com *5 The LCD monitor can be used with an optional arm stand by removing the stand. (See 6. ATTACHING AN ARM)
Краткое содержание страницы № 13
2. CABLE CONNECTION 2-1. Before Connecting Before connecting your monitor to the PC, change the display screen settings (Resolution and frequency) in accordance with the charts below. ● When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. Analog Input Resolution Frequency Dot Clock Remarks 640 × 480 67 Hz Apple Macintosh 640 × 480 ~ 75 Hz VGA, VESA 720 × 400 70
Краткое содержание страницы № 14
2-2. Connecting the Signal Cable ● Be sure that the power switches of both the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Analog Input Signal Cable Connector of the PC PC Video Output Connector / ● Standard graphics card D-Sub mini 15 pin Signal Cable (MD-C87 enclosed) ● Power Macin
Краткое содержание страницы № 15
Signal Cable (FD-C39 enclosed) ● Digital graphics board Video Output Connector/ DVI ● Power Mac G4/G5 (DVI) Input Connector (monitor) / DVI ● The monitor is not compatible with a Power Mac G4/G5 ADC (Apple Display Connector). 2. Plug the power cord into the power connector on the rear of the monitor. Then, plug the other end of the cord into a power outlet. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the
Краткое содержание страницы № 16
displayed for a few seconds on the right top corner of the screen. ● Adjust brightness of the screen depending on the brightness of your environment. The "BrightRegulator function" enables to adjust the brightness of the screen automatically depending on the surrounding brightness. ● Be sure to take adequate rests. A 10-minute rest period each hour is suggested. Bright Regulator Function BrightRegulator function adjusts the brightness of the screen automatically depending on the surro
Краткое содержание страницы № 17
Selecting the Active Input The Input Signal Selection Button on the control panel can be used to select either DVI or D-SUB as the active input at any time. Every time the button is pressed, the input changes. When switching the signal, the kind of the input signal (Analog or Digital) is displayed for a few seconds on the right top corner of the screen. ● The sound from the speaker is also switched when switching the input signal. 2-4. Sound Connections ● Always switch the
Краткое содержание страницы № 18
● About the sound control, please refer to "Sound Setting".
Краткое содержание страницы № 19
3. ScreenManager 3-1. How to use the ScreenManager ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. ● Main Menu and FineContrast Menu cannot be activated at the same time. 1. Entering the ScreenManager Press the Enter button once to display the main menu of the ScreenManager. 2. Making Adjustments and Settings 1. Select the desired sub menu icon using the Control buttons and press the Enter button. The sub menu appea
Краткое содержание страницы № 20
3-2. ScreenManager Adjustments and Settings The following table shows all the ScreenManager's adjustment and setting menus. "*" indicates adjustments of analog input only. Main menu Sub menu Reference Clock * Phase * 4-1.Screen Adjustment Screen Position * Range Adjustment * Smoothing Brightness Temperature Gamma Saturation Color (Custom)* 4-2.Color Adjustment 1 Hue Gain C-Booster Reset Volume Mute Surround 4-3.Sound Setting Sound Tone Balance PowerSave Reset Set the input
