Краткое содержание страницы № 1
For Microsoft Windows CE 2.12
Version C
LCD Monitor integrated
Windows-based Terminal
Touch Panel
LCD Monitor integrated
Windows-based Terminal
Please confirm the version of the software built in eClient, and refer to
the suited User's Manual (Refer to the User's Manual Version List on
next page).
This is the manual for the following software version.
* Microsoft Windows CE: 2.12 Rev.3.53 or later
* Microsoft Terminal Server Client: Ver.5.60 or later
* ICA Client: Ver.6.30 [Build 1078] or l
Краткое содержание страницы № 2
User’s Manual Version List A handling description changes with versions of the software built in eClient. Please refer to below. NOTE • The version of software built in eClient can be checked with a [System]-[ICA] tab of [Terminal Properties]. OS: Microsoft Windows CE 2.12 Software Microsoft ICA Client Microsoft Windows CE Windows Software Manual Terminal Server C Version 6.30 2.12 Rev.3.53 or later Version 5.60 or later (This Manual) [Build1078] or later Version 6.20 B 2.1
Краткое содержание страницы № 3
English SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2002-2003 EIZO NANAO CORPORATI
Краткое содержание страницы № 4
English TABLE OF CONTENTS 1. INTRODUCTION..................................................................................... 5 1-1. General Description ......................................................................................5 1-2. Features ........................................................................................................6 1-3. Package Contents..........................................................................................6 1-4. Controls & Con
Краткое содержание страницы № 5
English 1. INTRODUCTION Thank you very much for purchasing the EIZO eClient 530L/531L/531LT-GR. 1-1. General Description The eClient is a terminal which displays applications on a Windows Terminal Server (WTS) or a web site and conveys input by a keyboard or a mouse to the WTS. To operate the eClient, please connect it to a WTS with Microsoft Window NT Terminal Server Edition or Windows 2000 Server / Advanced Server / Datacenter Server. Windows Terminal Server (WTS) eClient Out
Краткое содержание страницы № 6
English 1-2. Features • Lower TCO* *TCO (Total Cost of Ownership) Expense for managing and administrating computer systems. • Saves Space and Power Consumption • Less Heat, Less Noise • 531L/531LT-GR * Serial Port for Modem/PDA (*Hayes AT Compatible Modem Supported) * Portrait resolution supported [In use of the Citrix ICA Client (ICA)] • 531LT-GR * A Touch Panel and a Stylus Provided 1-3. Package Contents Please contact your local dealer for assistance if any of the li
Краткое содержание страницы № 7
English 1-4. Controls & Connectors Front (1) (2) (1) Power Switch (2) Power Indicator Power Indicator Unit Green Operation Screen saver mode Yellow Power save mode NOTE • When turning off/on the unit, leave the unit off for a few seconds before turning it on again. 1. INTRODUCTION 7
Краткое содержание страницы № 8
English Rear (10) (8) (9) (11) (3)(4) (5) (6) (7) (3) Mouse Connector (4) Keyboard Connector (5) Ethernet Connector (10 Base-T) (6) Parallel Connector (7) Power Connector (8) Serial Connector (RS-232C) (531L/531LT-GR) 1 (9) Security Lock* 2 (10) Holes for Mounting an Arm Stand* (11) Stand 1 * This allows for connection of a security cable. This lock supports Kensington's MicroSaver security system. For further information, please consult: Kensington Technology Group 28
Краткое содержание страницы № 9
English 1-5. Overview Directions for the eClient’s Setup 2. CONNECTING THE p.10 3. SETTING UP THE eClient 3-1. WBT Setup Wizard p.13 3-2. Dial-Up Connection p.27 4. ADDING & CHANGING A CONNETION NAME 4-1. Adding a Connection Name p.34 4-2. Deleting a Connection p.52 4-3. Editing a Connection p.53 4-4. Setting an Autostart Connection p.55 Directions for the eClient’s Operation. 5. LOGON & LOGOFF 5-1. Logon to a WTS p.56 5-2. Logoff from the WTS p.59 Directions for Changin
Краткое содержание страницы № 10
English 2. CONNECTING THE eClient This chapter shows how to connect the eClient to a WTS. 2-1. Setting up the eClient Please observe the following cautions when connecting the eClient. WARNING Place the eClient on a strong, stable surface. A unit placed on an inadequate surface may fall, resulting in injury or equipment damage. If the unit falls, disconnect the power immediately and have the unit checked by a qualified service engineer before using it again. Using a unit after
Краткое содержание страницы № 11
English 2-2. Connecting the eClient NOTE • Before connecting the eClient, confirm the following: • The eClient is turned off. • The WTS is turned on. • Connect the peripherals to the appropriate connectors of the unit. 1. In case of connecting the WTS through LAN: Connect the eClient to the network with an ethernet cable. In case of a dial-up or dial-in connection (531L/531LT-GR only): Connect the eClient to a modem or a modem card. Modem Card Power Cord Printer Network K
Краткое содержание страницы № 12
English 3. Plug the power cord into the power connector. WARNING Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may cause in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may cause in fire or electric shock. 12 2. CONNECTING THE eClient
Краткое содержание страницы № 13
English 3. SETTING UP THE eClient This chapter presents how to prepare for a connection with a WTS when the eClient starts up for the first time. 3-1. WBT Setup Wizard 1. Turn on the power switch. The power indicator turns green. NOTE • When no picture is displayed, or when the following message is shown on the screen, please refer to “8. Troubleshooting” on page 92. - Message - In use of a stylus or a finger as an input device, “No Mouse Connected!!” caution does not
Краткое содержание страницы № 14
English 2. “Touch panel calibration” is displayed (531LT-GR only). Five targets are displayed on the screen. Press the targets with a stylus or a fingertip to locate the center of the touch panel. If you accidentally touched the screen in the wrong spot during calibration, you will distort the touch panel calibration. 3. “Calibration measured” window is displayed when you finished (531LT-GR only). Click the “Enter” key to accept the settings. 14 3. SETTING UP THE eClient
Краткое содержание страницы № 15
English 4. “WBT Setup Wizard” is displayed. Click [Next>]. 5. End User License Agreement page is displayed. Read the content and click [Accept] to continue. 3. SETTING UP THE eClient 15
Краткое содержание страницы № 16
English 6. IP address setting page is displayed. [Yes, use the IP information supplied by DHCP.] ...................................Select this when using DHCP service. All the necessary information of the eClient including the IP address will be obtained by the DHCP. [No, I will enter static IP information.] ...................................Select this when not using DHCP service. Enter the IP address of the eClient. If DHCP service is not in operation, following message
Краткое содержание страницы № 17
English 7. IP address page is displayed. [IP Address] ........................Type the IP address of the unit. [Subnet Mask] ....................Type the subnet mask of the network. [Gateway] ...........................Type IP address of the Gateway machine if necessary. Click [Next>] when finished. 3. SETTING UP THE eClient 17
Краткое содержание страницы № 18
English 8. DNS and WINS settings page is displayed. This check box should be marked when DNS or WINS is used. NOTE • Skip the page by clicking [Next>] if DNS or WINS is not used. If using DNS Click the [Enable DNS] check box to activate this box. [Default Domain Name] .....Type the default domain name. [Primary Server IP]..............Type the DNS primary Server IP address. [Secondary Server IP] ..........Type the DNS secondary Server IP address. If using WINS Click the [
Краткое содержание страницы № 19
English 9. Desktop area resolution and color settings page is displayed. Select the preferable display mode from the two available modes: · 1024 x 768 (256 colors) · 1024 x 768 (65,536 colors) · 768 x 1024 (256 colors) (531L/531LT-GR only) · 768 x1024 (65,536 colors) (531L/531LT-GR only) NOTE • The orientation of 768 x 1024 is a portrait. (768 x 1024 available for Citrix ICA. When RDP is used, 640 x 480 is displayed on center of the screen.) To use the portrait orientat
Краткое содержание страницы № 20
English 10. Local Printer Setup page is displayed. NOTE • The following is required to install a local printer; * A printer is connected to the printer port or the serial connector of the eClient. * An RDP protocol is used for connection to a WTS. * Microsoft Windows 2000 Server / Advanced Server / Datacenter Server is installed in a WTS • A Local Printer mentioned here is a printer connected directly to the Parallel Connector of the unit. Select [Yes] when using a local printe
