Краткое содержание страницы № 1
Dell™ E2009W/E2209W Flat Panel Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this docume
Краткое содержание страницы № 2
Back to Contents Page About Your Monitor Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Package Contents Product Features Identifying Parts and Controls Monitor Specifications Plug and Play Capability Maintenance Guidelines Package Contents Your monitor ships with the components shown below. Ensure that you have received all the components and contact Dell if something is missing. NOTE: Some items may be optional and may not ship with your Monitor. Some features or media may not be availa
Краткое содержание страницы № 3
Product Features The Dell™ E2009W/E2209W flat panel display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ E2009W:20-inch (508 mm) viewable area display. ■ E2209W:22-inch (558.68 mm) viewable area display. ■ 1680 x 1050 resolution, plus full-screen support for lower resolutions. ■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side. ■ Tilt adjustment capabilities. ■ Plug and play capab
Краткое содержание страницы № 4
Back view Back View with monitor stand Label Description/Use VESA mounting holes (100mm) 1 Use to mount the monitor. (Behind attached VESA plate) 2 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 3 Security lock slot Use a security lock with the slot to help secure your monitor. 4 Dell Soundbar mounting brackets Attach the optional Dell Soundbar. 5 Stand removal button Press to release the stand. 6 Regulatory rating label Lists the regulatory
Краткое содержание страницы № 5
Bottom view Label Description 1 AC power cord connector 2 Stand lock 3 DVI connector 4 VGA connector Monitor Specifications Flat Panel Specifications Model E2009W E2209W Screen type Active matrix - TFT LCD Active matrix - TFT LCD Panel type TN TN Screen dimensions 20 inches (20-inch viewable image size) 22 inches (22-inch viewable image size) Preset display area: Horizontal 433.44 mm (17.06 inches) 473.76 mm (18.7 inches) Vertical 270.90 mm (10.67 inches) 296.1 mm (11.7 inches) Pixel pitch 0.2
Краткое содержание страницы № 6
Video Supported Modes Model E2009W/E2209W Video display capabilities (DVI playback) 480i/480p/576i/576p/720p/1080i/1080p (Support HDCP) Preset Display Modes Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Display Mode (kHz) (Hz) (MHz) (Horizontal/Vertical) VESA, 720 x 400 31.5 70.0 28.3 -/+ VESA, 640 x 480 31.5 60.0 25.2 -/- VESA, 640 x 480 37.5 75.0 31.5 -/- VESA, 800 x 600 37.9 60.0 40.0 +/+ VESA, 800 x 600 46.9 75.0 49.5 +/+ VESA, 1024 x 768 48.4 60.0 65.0 -/- VESA, 1024 x 7
Краткое содержание страницы № 7
Depth 6.24 inches (158.5 mm) 6.44 inches (163.7 mm) Weight Weight with packaging 14.15 lbs (6.42 kg) 16.76 lbs (7.62 kg) Weight with stand assembly and cables 10.80 lbs (4.90 kg) 13.16 lbs (5.98 kg) Weight without stand assembly (For wall mount or VESA mount 8.10 lbs (3.68 kg) 11.92 lbs (5.41 kg) considerations - no cables) Weight of stand assembly 2.64 lbs (1.20 kg) 2.73 lbs (1.24 kg) Environmental Characteristics Model E2009W/E2209W Temperature Operating 5° to 35°C (41° to 95°F) Storage: -2
Краткое содержание страницы № 8
Pin 15-pin Side of the Connected Signal NumberCable 1 Video-Red 2 Video-Green 3 Video-Blue 4 GND 5 Self-test 6 GND-R 7 GND-G 8 GND-B 9 Computer 5V/3.3V 10 GND-sync 11 GND 12 DDC data 13 H-sync 14 V-sync 15 DDC clock DVI Connector Pin 24-pin Side of the Connected Signal Number Cable 1 TMDS RX2- 2 TMDS RX2+ 3 TMDS Ground 4 Floating 5 Floating 6 DDC Clock 7 DDC Data 8 Floating 9 TMDS RX1- 10 TMDS RX1+ 11 TMDS Ground 12 Floating 13 Floating 14 +5V/+3.3V power 15 Self test
Краткое содержание страницы № 9
16 Hot Plug Detect 17 TMDS RX0- 18 TMDS RX0+ 19 TMDS Ground 20 Floating 21 Floating 22 TMDS Ground 23 TMDS Clock+ 24 TMDS Clock- Plug and Play Capability You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select
Краткое содержание страницы № 10
Back to Contents Page Setting Up the Monitor Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing the Cables Attaching the Soundbar (optional) Removing the Stand Wall Mounting (Optional) Attaching the Stand NOTE: The stand is detached from monitor when they are shipped from the factory. Place the stand on a flat surface and follow these steps to attach the monitor stand: 1. Fit the groove on the back of the monitor to the two tab
Краткое содержание страницы № 11
Connecting the Blue VGA Cable CAUTION: The graphics are used for the purpose of illustration only. Appearance of the computer may vary. Organizing the Cables After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above. Attaching the Soundbar(optional)
Краткое содержание страницы № 12
NOTICE: Do not use with any device other than Dell Soundbar. 1. Working from the rear of the monitor, attach the Dell Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor. 2. Slide the Dell Soundbar to the left until it snaps into place. 3. Connect the Soundbar with the power brick. 4. Plug the power cables of the power brick into a nearby outlet. 5. Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack. R
Краткое содержание страницы № 13
1. Press and hold the stand release button. 2. Lift the stand up and away from the monitor . Wall Mounting (Optional) (Screw dimension: M4 x 10mm). Refer to the instructions that come with the VESA compatible base mounting kit. 1. Place the monitor panel on soft cloth or cushion on stable flat table. 2. Remove the stand 3. Use a screwdriver to remove the four screws securing the plastic cover. 4. Attach the mounting bracket from the wall mounting kit to the LCD. 5. Mount the LCD on the wall by f
Краткое содержание страницы № 14
Back to Contents Page Operating the Monitor Dell™ E2009W/E2209W Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On-Screen Display (OSD) Menu Setting the Optimal Resolution Using the Dell Soundbar (Optional) Using the Tilt Using the Front Panel Controls Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows the numeric values of the characterist
Краткое содержание страницы № 15
D Use this button to select the input source or select an OSD menu option. Use the Input source button to select one of the two different video signals that may be connected to your monitor: VGA input DVI-D input If both VGA and DVI cables are connected to one Computer, this monitor displays an image automatically as long as a video signal is OK / Input Source present in either VGA or DVI outputs. On a display connected to two Computers, set equal time for both screen savers. The video input Sel
Краткое содержание страницы № 16
or Main Menu for Digital (DVI-D) Input NOTE: AUTO ADJUST is only available when you use the analog (VGA) connector. 2. Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor. 3. Push the button once to activate the highlighted option. 4. Push the and buttons to select the desired parameter. 5. Push to enter the slide bar and then
Краткое содержание страницы № 17
Submenus Use this menu to activate Brightness/Contrast adjustment. BRIGHTNESS & CONTRAST Back Push to go back to the main menu. Brightness adjusts the luminance of the backlight. Brightness Push the button to increase brightness and push the button to decrease brightness (min 0 ~ max 100). Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary. Contrast Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100).
Краткое содержание страницы № 18
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular AUTO ADJUST setup. NOTE: In most cases, Auto Adjust produces the best image for your configuration. NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector. Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor. INPUT SOURCE Back Push to go back to the ma
Краткое содержание страницы № 19
Back Push to go back to the main menu. Input Color Allows you to set the video input mode to. Format RGB: Select this option if your monitor is connected to a computer or DVD player using the VGA and DVI cable or the HDMI to DVI adapter. YPbPr: Select this option if the your DVD player supports only YPbPr output. Mode Selection Allows you to set the display mode to: Graphics: Select this mode if your monitor is connected to your computer. Video: Select this mode if you monitor is connected to a
Краткое содержание страницы № 20
NOTE: Hue adjustment is available only for video input. Saturation This feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100'. Push to increase the monochrome appearance of the video image Push to increase the colorful appearance of the video image NOTE: Saturation adjustment is available only for video input. Color Reset Resets your monitor's color settings to the factory defaults. Exit Menu Push to exit the OSD main menu. DISPLAY
