Краткое содержание страницы № 1
BenQ FP767
LCD Color Monitor
17.0" (43.2cm) LCD Panel Size
User's Manual
Краткое содержание страницы № 2
BenQ LCD Color Monitor User's Guide Copyright © 2002 by BENQ Corporation. All rights reserved. No part of this publication may be Copyright reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation. BENQ Corporation makes no representations or warranties, either expressed or
Краткое содержание страницы № 3
BenQ LCD Color Monitor User's Guide ==== Unpacking .......................................................................................................................................... 3 ======Table Views of the Monitor ..................................................................................................................... 4 == ========of Front View ..................................................................................................................................
Краткое содержание страницы № 4
BenQ LCD Color Monitor User's Guide Unpacking Please check you have the following items. If they are missing or are damaged, please contact the dealer immediately at which you purchased the good. LCD monitor with undetachable signal cable Quick Start Guide CD-ROM Power Cord Audio Cable Extension Base Signal Cable English 3
Краткое содержание страницы № 5
BenQ LCD Color Monitor User's Guide Views of the Monitor Front View Back View (1) English 4
Краткое содержание страницы № 6
BenQ LCD Color Monitor User's Guide Back View (2): Locations of plugs & sockets 1 2 3 1. D-sub connector 2. Power AC input jack 3. Audio jack English 5
Краткое содержание страницы № 7
BenQ LCD Color Monitor User's Guide Installation Hardware Installation Make sure that the computer and monitor’s power are both turned off. Please follow the steps to install your LCD monitor. 1. Place the arrow on the base and the front side of the monitor in corresponding direc- tion. The arrow on the base indicates the front of the base. Place the monitor into the base until it locks into place. There will be a clicking sound. 2. Place the monitor face down on a soft sur- face. Hold the back
Краткое содержание страницы № 8
BenQ LCD Color Monitor User's Guide 4. Connect the power cord to your LCD monitor. Then connect audio cable to the Audio Input of BenQ LCD Monitor. 5. Connect the other end of signal cable to the signal connector of your computer. 6. Connect the audio cable to your computer. Connect the power cord to an AC power socket. Signal Cable Power Cord Audio Cable English 7
Краткое содержание страницы № 9
BenQ LCD Color Monitor User's Guide Software Installation A. Microsoft® Windows® 95 / 98 / 2000 / XP If you are using Windows 95, Windows 98, Windows 2000 or XP as an operating system, you have to set up the correct monitor driver. Windows 95 The first time you start Windows with a new monitor, the system will detect it and automatically install the driver for plug and play displays. To install the current driver from CD, proceed as follows: 1. Insert “BenQ LCD Monitor” CD-ROM into your CD
Краткое содержание страницы № 10
BenQ LCD Color Monitor User's Guide 4. From the “Display Properties” window, select the “Settings” tab. Click the “Advanced Properties" button in the bottom right corner. 5. Select the “Monitor” tab. Click the “Change” button in the top right corner. English 9
Краткое содержание страницы № 11
BenQ LCD Color Monitor User's Guide 6. Now click the “Have Disk” button in the bottom right corner. When the next window appears, select the “Browse” button. 7. Insert the supplied CD into your computer. Select the CD-drive from the drop-down menu. 8. In the field above the drive selection, change to the "Drivers” folder. The current driver files are located there. Press “OK” and the window closes. English 10
Краткое содержание страницы № 12
BenQ LCD Color Monitor User's Guide 9. By pressing “OK” again in the next window you will be given a list of compatible devices. Select “FP767” from the list and press “OK” again. 10. You are now back at “Advanced Display Properties”. Close this window by clicking “OK “ and confirm the following messages with “Yes”. Click “OK” and “Yes” again. The installation is now completed. You can close “Display Properties”. English 11
Краткое содержание страницы № 13
BenQ LCD Color Monitor User's Guide Windows 98 To manually install or update the driver, perform the following steps: 1. 1. Open the control panel and double-click "Display" icon. . 2. From the "Display Properties" window, select the "Settings" tab. Click the "Advanced..." button in the bottom right corner. . English 12
Краткое содержание страницы № 14
BenQ LCD Color Monitor User's Guide 3. Select the "Monitor" tab. Click the "Change" button in the top right corner. 4. The "Update Device Driver Wizard" opens. Confirm by clicking "Next". English 13
Краткое содержание страницы № 15
BenQ LCD Color Monitor User's Guide 5. Select "Display a list of all drivers in a specific location, so you can select the driver you want." and press "Next". 6. Now click the “Have Disk” button in the bottom right corner. Another window appears, select the “Browse” button. English 14
Краткое содержание страницы № 16
BenQ LCD Color Monitor User's Guide 7. Insert the supplied CD into your computer. Select the CD-drive from the drop-down menu. . 8. By pressing “OK” again in the next window you will be given a list of compatible devices. Select “FP767” from the list and press “Next” again. 9. An “Insert Disk” dialogue box appears. Click “OK”, and then click “Skip File.” English 15
Краткое содержание страницы № 17
BenQ LCD Color Monitor User's Guide 10. Close “Update Device Driver Wizard” by clicking “Finish” to complete the installation. English 16
Краткое содержание страницы № 18
BenQ LCD Color Monitor User's Guide Windows 2000 The first time you start Windows with a new monitor, the system will detect it and automatically start the “Add New Hardware Wizard”. Carry out the instructions beginning at step 4. 1. Insert “BenQ LCD Monitor” CD-ROM into your CD-ROM Driver. 2. Click “Start” then “Settings”. 3. Open the Control Panel and double click on the “Display” icon. English 17
Краткое содержание страницы № 19
BenQ LCD Color Monitor User's Guide 4. From the “Display Properties” window, select the “Settings” tab. Click the “Advanced...” button in the bottom right corner. 5. Select the “Monitor” tab, then click “Properties” . English 18
Краткое содержание страницы № 20
BenQ LCD Color Monitor User's Guide 6. Select the “Driver” tab, then click “Update Driver.” 7. The “Upgrade Device Driver Wizard” will pop up. Then Click “Next”. English 19
