Краткое содержание страницы № 1
B4100336 / 02
December 2002
© 2002 BARCO NV. All rights reserved
BarcoView
Theodoor Sevenslaan 106
MFGD 2320
8500 Kortrijk, Belgium
Phone: +32(0)56 23 32 44
Fax: +32(0)56 23 33 74
E-mail: sales.medical@barco.com
User Manual
http://www.barcoview.com
BarcoView Inc
3059 Premiere Parkway
Duluth, Georgia, 30097,USA
Phone: +1 678 475 8000
Fax: +1 678 475 8100
E-mail: sales.medical@barco.com
http://www.barcoview.com
BarcoView LTD
16F-1, Cheng Loong Plaza 33, Min Sheng Road
Section 1, Pan Chiao, Taipei
Краткое содержание страницы № 2
Contents Safety instructions ............................................................................................... 5 1. Overview ......................................................................................................... 6 1.1. Introduction ............................................................................................... 6 1.2. Package contents ..................................................................................... 7 1.3. Controls and connector
Краткое содержание страницы № 3
3.7. Selecting inputs ...................................................................................... 22 To enter the Inputs menu: ........................................................................... 22 You can select the following input selection settings: ................................. 23 3.8. Settings ................................................................................................... 23 To enter the Settings menu: ..............................................
Краткое содержание страницы № 4
SAFETY INSTRUCTIONS Power cord with CEE 7 plug ( ): The colors of the mains lead are colored in accordance with the following code: Green-and-yellow: Earth (safety earth), Blue: Neutral, Brown: Line Power cord with ANSI 73.11 plug ( ): The wires of the power cord are colored in accordance with the following code: Green/ Read the safety and operating instructions yellow: ground, White: neutral, Black: line before operating the apparatus. (live) Retain safety and operating instructions for P
Краткое содержание страницы № 5
1. OVERVIEW 1.1. Introduction The MFGD 2320, BARCO’s 20” 2 megapixel grayscale LCD display, guarantees perfect image quality in medical imaging applications. The display combines a TFT (thin film transistor) liquid crystal display panel structure and a built-in backlight with inverter for a better picture quality. It is designed to meet the users’ needs for performance, consistency, and outstanding image quality through a streamlined development process. If the Portrait Accelerator option is in
Краткое содержание страницы № 6
Best resolution The optimum and recommended resolution is 1600 x 1200 or 1200 x 1600 (if the Portrait Accelerator option is installed). The recommended refresh rate is 60 Hz. Would you have trouble selecting a proper display setting in Windows, please refer to the Troubleshooting section further. BARCO’s BarcoMed 2MP2FH imaging board is the best choice to drive the MFGD 2320 display. Power saving (DPMS) The MFGD 2320 is equipped with a power saving system. When left idle for a certain time, the
Краткое содержание страницы № 7
1.3. Controls and connectors Front (1) Ambient Light Compensation (ALC) sensor (2) Power LED - The LED is off when the display is off. - The LED is green when the display is on (when enabled in the on- screen menus). - The LED is orange when the display is in Stand-by power-saving mode. 1 2 Side (3) USB downstream connector (4) Control wheel for navigating through the on-screen display (OSD) menus and changing values in the menus 4 3 User manual MFGD 2320 6
Краткое содержание страницы № 8
Rear (5) Digital DVI (video and data) input (6) D15 (VGA) video connector (7) Vertical sync input (8) Composite / Horizontal sync input (9) Composite video input (10) USB downstream connector (11) USB upstream connector (12) DC 12V power input DVI D15 VS CS/HS VIDEO 56 789101112 User manual MFGD 2320 7
Краткое содержание страницы № 9
2. INSTALLATION 2.1. Precautions Keep your original packaging. It is designed for this display and is the ideal protection during transport. Avoid reflections in the flat panel to reduce eye strain. Place the display on a strong and stable table or desk. Keep the display away from heat sources and provide enough ventilation in case it is built in a rack or console. Make sure all equipment is switched off before connecting the signals. 2.2. Before installing the display Important: In th
Краткое содержание страницы № 10
2.3. Portrait or landscape position You can change the orientation of the panel at any time, but it is more convenient to select landscape or portrait orientation before connecting the cables. To change the panel orientation: 1 Stand at the front side of the panel and take the panel at both sides. 2 Very important: Tilt the panel before changing the orientation. Should you change the panel orientation without tilting it first, you might irreversibly damage the tilt & swivel mechanism. 3 To cha
Краткое содержание страницы № 11
To connect analog video & sync signals on BNC: Connect the video & sync output of the signal source to the video and sync inputs (9), (8) and (7) of the display. The inputs accept the following signals: Video with separate horizontal and vertical sync. - The connection consists of 3 cables. - Connect the video signal to the connector Video (9). - Connect the horizontal sync signal to the connector HS/CS (8). - Connect the vertical sync signal to the connector VS (7). - Make sure the signal con
Краткое содержание страницы № 12
3 Connect the other end of the power cord to a grounded power outlet. 4 Route the cable so that it enters the connector compartment at the place where the cover is bulged. Connect to DC Connect one end of input of the display power cable 2.5. Routing the signal cables After connecting all cables, fix them in the cable tie at the rear of the connector compartment. Bind the cables together above and under the foot, by means of the 2 velcro strips included in the package. After fixing the cables, p
Краткое содержание страницы № 13
2.6. Using the USB hub To use the display in a configuration controlled by MediCal Pro, connect the display to the PC using the USB connector. Also, the USB interface inside the display allows you to connect USB devices, such as a keyboard, mouse or digital camera, to the display. To use the USB hub: 1 Connect the display’s USB upstream connector (11) to the USB port of the PC. 2 Connect any USB device to any of the display’s USB downstream connectors (3) or (10). 2.7. Tilt and swivel positionin
Краткое содержание страницы № 14
3. OPERATION 3.1. Switching to stand-by position When the display is on and no on-screen menus are visible, press the control wheel (4) for a few seconds to switch the display in stand-by. When the display is in stand-by, press or turn the control wheel to switch it back on. 3.2. Controlling the display The control wheel (4) at the bottom (landscape orientation) or at the side (portrait orientation) allows you to perform controls. The control wheel is a rotation - click system. It provides the f
Краткое содержание страницы № 15
To browse or scroll through the menus on the current level, turn the wheel clockwise or counterclockwise. To enter into a menu or move to a lower level of the menu structure, turn the control wheel to select the desired menu. Next, click the wheel shortly. To exit from a menu or move to a higher level of the menu structure, turn the control wheel to select EXIT. Next, click the control wheel shortly. If you do this when you are in the Main Menu, you exit the menu system. Some adjustments
Краткое содержание страницы № 16
3.3. Using the Autoset* functions * Not in DVI mode The Autoset menu provides a set of functions to adjust the display automatically. When do you need to use the Autoset functions? It is necessary to perform the Auto Gain and Auto Phase calibrations in the following cases: The first time you use the display on an analog video After connecting or selecting another analog video source It is necessary to perform the Automatic Geometry function in case you notice the image geometry or positionin
Краткое содержание страницы № 17
2 Click the control wheel. The Autoset menu appears. AUTOSET Full Autoset Automatic Geometry Automatic Phase Automatic Gain EXIT 3 Turn the control wheel to select the function you wish to execute. 4 Execute the function as described below. The Autoset menu contains the following items: Full Autoset .................Click the control wheel to perform all Autoset functions one after another. Automatic Geometry ...Click the control wheel to adjust the image geometry automatically Automatic Phase
Краткое содержание страницы № 18
2 Click the control wheel to enter the Video Contrast or Video Brightness menu. You can change the current setting manually or select the calibrated position. To change Video Contrast or Video Brightness manually: 1 Turn the control wheel to select the manual Contrast (Brightness) control. VIDEO CONTRAST Contrast CAL position Man Contrast adj EXIT 2 Click the control wheel to enter the control. 3 Turn the control wheel to change the Video Contrast or Video Brightness value. 4 Click the control w
Краткое содержание страницы № 19
3.5. Setting the Luminance value With this function, the backlight value is stabilized by the I-Guard sensor. The value you enter is the target backlight luminance, ex- pressed in Cd/m². Proceed as follows: 1 In the main menu, turn the control wheel to select the Luminance menu. MFGD 2320 MAIN MENU Autoset Video Contrast* Video Brightness* Luminance Adjustments Input Selection Auto Settings Scan Mode Information EXIT 2 Click the control wheel. The Luminance menu appears. 3 Turn the control whee
Краткое содержание страницы № 20
2 Click the control wheel. The Adjustments menu appears. ADJUSTMENTS Geometry Phase* EXIT * Not in DVI mode 3 Turn the control wheel to select the adjustment menu you wish to enter: Geometry or Phase. 4 Click the control wheel to enter the menu. 5 Turn the control wheel to select the adjustment you wish to execute. 6 Click the control wheel. 7 Execute the adjustment as described below. Geometry adjustments The Geometry menu contains the following items: Automatic Geometry* .... Click the control
