Краткое содержание страницы № 1
SyncMaster 275T
Install driver Install programs
Краткое содержание страницы № 2
Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images here are for reference only, and are not applicable in
Краткое содержание страницы № 3
This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which
Краткое содержание страницы № 4
This may cause electric shock or fire. Installation Be sure to contact an authorized Service Center when installing your set in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it will be operated for 24 hours continuously such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so
Краткое содержание страницы № 5
Keep any heating devices away from the power cable. A melted coating may cause electric shock or fire. Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualif
Краткое содержание страницы № 6
Cleaning and Using When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the
Краткое содержание страницы № 7
This may cause electric shock or fire. Refer to a qualified servicing company. If your monitor does not operate normally - in particular, if there is any unusual sound or smell coming from the monitor - contact an authorized dealer or the Service Center. This may cause electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. This may cause a malfunction, electric shock or fire. In particular, avoid opera
Краткое содержание страницы № 8
This may a malfunction, an electric shock or fire. If a foreign substance enters the monitor, unplug the power cord and contact the Service Center. Keep the product away from combustible chemical sprays or inflammable substances. This may cause an explosion or fire. Never insert anything metallic into the monitor openings. This may cause electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or
Краткое содержание страницы № 9
Dropping the product may cause damage to the product or the person carrying it. Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire. When moving the monitor, turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the monitor. Failure to disconnect cables may damage it and cause fire or electric shock
Краткое содержание страницы № 10
feet fall up from the floor. Adjust the arm position so that it is below the heart Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health
Краткое содержание страницы № 11
PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have an image retention when switching from one image to another especially after displaying a stationary image for a long time. This guide is to demonstrate a correct usage of LCD products in order to protect them from Image retention. Warranty Warranty does not cover any damage caused by image retention. Burn-in is not covered by the warranty. What is Image retention ? During normal operation of a LCD panel, pix
Краткое содержание страницы № 12
Ex) The best way to protect your monitor from Image retention is to set your PC or System to operate a Screen Saver program when you are not using it. Image retention may not occur when a LCD panel is operated under normal conditions. Normal conditions are defined as continuously changing video patterns. When the LCD panel is operated for a long time with a fixed pattern (-over 12 hours-), there may be slight difference in voltage between electrodes that work the liquid crystal (LC) in a
Краткое содержание страницы № 13
Package Contents Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without Stand Monitor With Stand Monitor & Sliding Stand Manual Warranty Card User's Guide, Monitor Driver,
Краткое содержание страницы № 14
(Not available in all Natural Color, Quick Setup Guide locations) MagicTune™ Cable Power Cord D-sub Cable DVI-D Cable USB Cable Sold separately S-Video Cable RCA Cable Component Cable Speaker package(option) Speaker RCA to stereo cable Your Monitor Front
Краткое содержание страницы № 15
Opens the OSD menu. MENU button [ ] Also use to exit the OSD menu or return to the previous menu. Adjust buttons [ ] These buttons allow you to adjust items in the menu. Analog/Digital(PC) : MagicBright™ is a new feature providing optimum viewing environment MagicBright™ button depending on the contents of the image you are watching. Currently [] seven different modes are available: Custom, Text, Internet, Game, Sports, Movie and Dynamic CR. Each mode has its own pre-configured
Краткое содержание страницы № 16
This will save power and reduce eye fatigue. 4) Custom Select this mode when you want to adjust the image according to your preferences. >> Click here to see an animation clip Brightness button [ ] When OSD is not on the screen, push the button to adjust brightness. >> Click here to see an animation clip Activates a highlighted menu item. / Enter button [ ] / SOURCE button Push the ' ', then selects the video signal while the OSD is off. (When the button is pressed to change the i
Краткое содержание страницы № 17
POWER : Connect the power cord for your monitor to the POWER port on the back of the monitor. DVI(HDCP) / RGB DVI(HDCP) : Connect the DVI cable to the DVI(HDCP) port on the back of your monitor. RGB : Connect the RGB terminal at the back of your monitor to your computer. VIDEO / S-VIDEO / AUDIO POWER VIDEO : External device (video) input terminal S-VIDEO : External device (S-video) input terminal AUDIO POWER : Connect the speaker power line connected to
Краткое содержание страницы № 18
The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. Stand Stopper Remove the fixing pin on the stand to lift the monitor up and down. See Connecting Cables for further information regarding cable connections.
Краткое содержание страницы № 19
Connecting Cables Connect the power cord for your monitor to the POWER port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the RGB (Analog) connector on the video card. - Connect the signal cable to the 15-pin, RGB port on the back of your monitor. [ RGB ] Using the DVI (Digital) connector on the video card. - Connect the DVI cable to the DVI(HDCP) port on the back of your monitor.
Краткое содержание страницы № 20
The USB port of the monitor supports High-Speed Certified USB 2.0. High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mbps 2.5W 2.5W 2.5W Power Consumption (Max., each port) (Max., each port) (Max., each port) Connect the UP port of the monitor and the USB port of the computer with the USB cable. To use DOWN port, you have to connect the UP (Upstream Cable) to the PC. Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port an
