Краткое содержание страницы № 1
SyncMaster 204Ts
Краткое содержание страницы № 2
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode.
Краткое содержание страницы № 3
Do not use a damaged or loose plug. ! This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. ! This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. ! An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. ! A bad connection may cause fire. Do not excessively bend the plug and wire
Краткое содержание страницы № 4
Do not drop the monitor when moving it. ! This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not project beyond the showcase or shelf. ! Dropping the product may cause damage to the product or personal injury. Do not place the product on an unstable or small surface area. ! Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically
Краткое содержание страницы № 5
Do not place the monitor face down. ! The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. ! Installation by unqualified personnel may result in injury. ! Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes. ! Poor ventilation may cause an increase in the internal temperature of the product, resu
Краткое содержание страницы № 6
Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. ! Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year. ! Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire. Others Do not remove cover (or
Краткое содержание страницы № 7
Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period of time. ! Failure to do so may cause an electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. ! This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. ! This may cause a breakdown, electric shock or fire due to damage to
Краткое содержание страницы № 8
If you view a fixed screen for an extended period of time, residual image or blurriness may appear. ! Change the mode to energy save or set a screensaver to moving picture when you need to be away from the monitor for an extended period of time. Adjust the resolution and frequency to the levels appropriate for the model. ! Inappropriate resolution may cause undesirable picture quality. 20 inch - 1600 X 1200 @60 Hz Watching the monitor continuously at a too close angle may res
Краткое содержание страницы № 9
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual User's Guide, Monitor Driver, Warranty Card Quick Setup Guide Natural Color, MagicTune, (Not available in all locations) MagicRotation software Cable
Краткое содержание страницы № 10
D-sub Cable Power Cord Sold separately DVI Cable Set-Bracket Screws (4EA) Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. button This buttons allow you to adjust items in the menu. Analog/Digital(DVI) : MagicBright button MagicBright is a new feature providing the optimum viewing [] environment depending on the contents of the image you are watching. Currently four different modes are available: Cust
Краткое содержание страницы № 11
Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) Entertain : High brightness For watching motion pictures such as a DVD or Video CD. 3) Internet : Medium brightness For working with a mixture of images such as text and graphics. 4) Text : Normal brightness For documentations or works involving heavy text. >>Cl
Краткое содержание страницы № 12
Rear (The configuration at the back of the monitor may vary from product to product.) POWER S/W : Switch the monitor on and off. POWER IN : Power cord, plugs into monitor and wall receptacle. DVI port (Source : Digital) : Connect the DVI cable to the DVI port on the back of your monitor. D-sub 15-pin port (Source : Analog) : Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. C-VIDEO (Source : Video) / S-VIDEO (Sou
Краткое содержание страницы № 13
C-VIDEO (Source : Video) / S-VIDEO (Source : S-Video) : C-VIDEO : External device (video) input terminal S-VIDEO : External device (S-video) input terminal Kensington Lock : The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) Stand Height Adjustment 1. Press the top side of the stand and then push the button at the rear bottom of the stand. 2. You can adjust the stand h
Краткое содержание страницы № 14
Connecting the Monitor 1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. 2-1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 2-2. Using the DVI (Digital) connector on the video card. Connect the DVI cable to the DVI port on the back of your monitor. 2-3. Connected to a Macintosh. Connect the mo
Краткое содержание страницы № 15
or a camcorder without disconnecting the PC. The configuration at the back of the monitor may vary from product to product. 1. Connecting AV Devices The monitor has AV connection terminals to connect AV input devices like DVD, VCR or Camcorder. You may enjoy AV signals as long as the monitor is turned on. 1. Input devices such as DVD, VCR or Camcorder are connected to the C-Video or S-Video terminal of the monitor using the C-Video or S-Video cable. C-Video, S-Video cable are opti
Краткое содержание страницы № 16
1. Input devices such as digital DVD is connected to the DVI terminal of the monitor using the DVI cable. DVI cable is optional. 2. Then, start the DVD with a DVD disc inserted. 3. Select Digital using the SOURCE button( ). Using the Stand Removing the base 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws(A) and then remove the Stand
Краткое содержание страницы № 17
Attaching a Base This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pad 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove four screws and then remove the stand from the LCD monitor. 4. Align the mounting interface Pad with the holes in the rear cover mounting pad and secure it with four screws that
Краткое содержание страницы № 18
4. Click the "Install" button in the "Warning" window. 5. Monitor driver installation is completed. Windows XP/2000 1. Insert CD into the CD-ROM drive. 2. Click "Windows XP/2000 Driver" 3. Choose your monitor model in the model list, then click the "OK" button. 4. If you can see following message window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certifying MS logo,and this installation don't damage y
Краткое содержание страницы № 19
Installing the Monitor Driver (Manual) Windows XP | Windows 2000 |Windows Me |Windows NT | Linux When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. ! Internet web site : http://ww
Краткое содержание страницы № 20
5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS
