Краткое содержание страницы № 1
User’s Manual
Краткое содержание страницы № 2
TABLE OF CONTENTS Special notes on LCD monitors ..............................................................................1 Introduction ...........................................................................................................2 Features ................................................................................................................ .2 Unpacking ............................................................................................................. .3 At
Краткое содержание страницы № 3
AL2002W SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0. 01% or les
Краткое содержание страницы № 4
AL2002W INTRODUCTION Congratulations for purchasing model AL2002W , a high performance 20-inch color TFT LCD monitor. The AL2002W monitor provides flicker-free and color images at optional resolutions. Through this user guide, we will introduce you step-by-step all the features, functions and technical specifications of the LCD monitor. Surely you will have a refreshing experience working with the monitor. FEATURES The AL2002W is a 20-inch TFT LCD monitor that is intelligent, microprocessor-b
Краткое содержание страницы № 5
AL2002W UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. • LCD Monitor • AC Power • DVI Cable • DSUB Cable (Only Dual-Input Model) • User Manual • Quick Start Guide Quick Start Guide E-3
Краткое содержание страницы № 6
AL2002W Attaching / Removing the Base Install: Remove: Align the four hooks on the bottom of Depress the hook as indicated first the monitor with the corresponding before removing the base and follow the slots on the bottom of the base. arrow direction to remove it. SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted
Краткое содержание страницы № 7
AL2002W CONNECTING THE POWER CORD • Check first to make sure that the power cord you use is the correct type required for your area. • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet. • For unit using at 120 V AC: Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V. • For unit using at 220/240 V
Краткое содержание страницы № 8
AL2002W PRESET MODES To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the Auto Setup under Windows “Full Screen” pattern or using the pattern in the floppy disk provided. When none of the mode is matched, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 9 user modes. The only condition to
Краткое содержание страницы № 9
AL2002W POWER SAVING The monitor will be driven into “Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. Power State LED Light Consumption ON Normal Green Power Saving Mode <2 W Amber The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 5 seconds. DDC To make your installation easier, the monitor is able t
Краткое содержание страницы № 10
AL2002W INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. 1-2 Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DVI video cable to the computer. 2. Connect power cord Connect the power cord to the monitor, then to a properly grounded AC outlet. 3.
Краткое содержание страницы № 11
AL2002W USER CONTROLS 4 56 12 3 Front Panel Controls 1. Power Switch: To turn ON or OFF the power. 2. Power LED : Lights up to indicate the power is turned ON. 3. Select MENU: To exit and enter OSD menu. 4. Select : To move downward in the OSD Item. ACt as Digital and Analog switching hot key when OSD is not displayed.(Only Dual-Input Model) 5.- : To decrease the value of the parameter in the OSD, which has been selected for adjustment. - : Choose the previo
Краткое содержание страницы № 12
AL2002W Basic Sections of a OSD Screen i i Language Brightness Factory Reset Contrast OSD Timeout Auto Contrast OSD Left/Right OSD Down/Up i i 5000K 6500K 7500K 8200K 9300K VGA Red 255 + - 1024 x 768 60Hz Green + 255 - Blue 255 + - i Auto Adjusting Please Wait Horizontal Size Fine Left/Right Down/Up No VGA Signal Auto Adjust Check VGA Cable E-10
Краткое содержание страницы № 13
AL2002W Standard OSD Operation 1. Press MENU key to activate the OSD menu, when OSD is not displayed. 2. Use Select key to move down through the menu cyclically. The parameter will be highlighted when selected. 3. Then use + or - to increase or decrease the value of the parameter, or make selection between different options. 4. To quit the OSD screen at any time during the operation, press MENU key. If no keys are pressed for a time period, the OSD automatically disappears. 5. When OSD is not
Краткое содержание страницы № 14
AL2002W • Auto Adjust Press “+” to turn on this function. The Auto-Adjust will automatically adjust V-Position, H-Position, Clock, and Clock-Phase, the whole process takes about 5 seconds. ------------------------------------------------------------ • Language Select among English, French, Italian, German, Spanish, , and . • Factory Reset To return the monitor to its default settings. • OSD TimeOut To adjust the period of OSD auto turn-off time. • OSD Left / Right To move the OSD position
Краткое содержание страницы № 15
AL2002W TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON • Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF Check the power switch. • No Check if AC power cord is properly connected • Picture to the monitor. LED displays • Check if video signal cable is properly amber color connected at the back of
Краткое содержание страницы № 16
AL2002W (DVI Mode) Problems Current Status Remedy LED ON • Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF Check the power switch. • No Check if AC power cord is properly connected • Picture to the monitor. LED displays • Check if video signal cable is properly amber color connected at the back of monitor. • Check if the power of computer system is ON. E-14
Краткое содержание страницы № 17
AL2002W SPECIFICATION LCD Display Display Type 20" TFT LCD Display Area (W x H) 433.4 x 270.9 mm Contrast Ratio 800:1 (Typ.) o o Viewing Angle 160 H 160 V (CR=10) Power Input Voltage 100-240Vac Frequency 50-60Hz Current Rating 1.5A Operational Features Display Colors 16.7M Resolution WSXGA (1680 x 1050) at 60 Hz maximum. 2 Brightness 300 cd/m (Typ.) Response Time 5 ms (Typ.) Interface Analog RGB, Digital(Only Dual-Input Model) Input Connector 15-pin D-sub, DVI-D Cable(Only Dual-Input Model) U
Краткое содержание страницы № 18
AL2002W Physical Specification Dimension (H x W x D) 383 x 479 x 188 (mm) Net Weight 4.5 Kg Power Power Saving Yes Power Consumption 40 W (Only Analog Input model) 49 W (Only Dual Input model) Regulation Safety & EMI UL, CUL, TUV-GS, TUV-Ergonomics, FCC-B, CE, TCO99 * All specifications are subject to change without notice. E-16
Краткое содержание страницы № 19
