Краткое содержание страницы № 1
SY-7IWM-X
Motherboard
Quick Start Guide
The SOYO CD
Quick BIOS Hardware Introduction
Setup Installation
Краткое содержание страницы № 2
SOYO ™ SY-7IWM-X Motherboard m y * These specifications are subject to amend without notice 2 7IWM-X Serial - Version 1.1 - Edition: November 2000 "http://www.soyo.com.tw". on the Internet. The address is Web Site For further information, please visit our is subject to amend without notice. to the correctness of the contents there is no guarantee given. The information in this document has been carefully checked for reliability; however, the Motherboard. Information in this guide This Quick S
Краткое содержание страницы № 3
1 Introduction 1 Congratulations on your purchase of the SY-7IWM-X Motherboard. This Quick Start Guide illustrates the steps for installing and setting up your new Motherboard. This guide provides all users with the basic steps of Motherboard setting and operation. For further information, please refer to the SY-7IWM-X Motherboard Uses ’ Guide that came with your Motherboard. Unpacking When unpacking the Motherboard, check for the following items: u The SY-7IWM-X FW82810E AGP/PCI/AMR Motherboard
Краткое содержание страницы № 4
SY-7IWM-X Motherboard Layout PS/2 KB PS/2 Mouse Nr Connector Connector 1 USB 1 USB 2 0 T COM1 USB 3 5 Intel ® E 1 1 A SDRAM FDC 3 JP2 1 JOYSTICK SDRAM T d F N W JP44 K L 1 2 3 r 11 M M M JP3 1 3 IDE 2 IDE 1 IR1 M M M 3 I I I R 5 D D D 1 1 4 1 Intel N 1 B B CODEC AC97 _ _ 4 J10 2 + Intel r AUX-IN I Fw82801_ + + 1 14 1 k PHONE-IN3 T _ 3V r Lithium t Battery1+ JP5 1 3 N r r 4 Introduction Jumpe CMOS Clea CHAFA LED Rese Powe (Optional) PWRB PCI Slot # Keyloc J1 LED ACP Speake LED PCI Slot
Краткое содержание страницы № 5
Key Features Ø Supports Intel® processors Ø Fan speed control - FSB 66MHz: Celeron™(400-700MHz) Ø Battery Low voltage Detect - FSB 100MHz: Pentium® III (500- 850MHz) Ø Support 7 sets of voltage monitoring - FSB 133MHz: Pentium® III (533MHz- Ø Supports multiple-boot function 1.13GHz) Ø Supports 66/100/133 MHz Front Side Ø Y2K Complaint Bus Frequency Ø Supports Audio Modem Riser slot (AMR Ø Auto-detect CPU voltage 1.0 compliant) * Ø 3D AGP Accelerator integrated into Ø 3 x 32-bit bus master PCI sl
Краткое содержание страницы № 6
2 Installation 2 To avoid damage to your Motherboard, please follow these simple rules while handling this equipment: l Before handling the Motherboard, ground yourself by touching on to an unpainted portion of the system's metal chassis. l Remove the Motherboard from its anti-static packaging. Hold the motherboard by the edges and avoid touching its components. l Check the Motherboard for damage. If any chip appears to be loose, press carefully to seat it firmly in its socket. Follow the direct
Краткое содержание страницы № 7
Install the Motherboard To perform the installation of your new SY-7IWM-X Motherboard, follow the steps below: CPU Installation Record the working frequency of your CPU that should be clearly marked on the CPU cover. FSB 66MHz FSB 100MHz FSB 133MHz TM To mount the Pentium® & Celeron processor that you have purchased separately, follow these instructions. 1 2 0 7 3 t e k c o S 0 7 3 t e k c o S 3 4 0 0 7 7 3 3 t t e e k k c c o o S S 1. Lift the socket handle up to a vertical position.
Краткое содержание страницы № 8
Connections to the Motherboard This section tells how to connect internal peripherals and the power supply to the Motherboard. The internal peripherals consist of IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (ACPI LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices. For more details on connecting internal and external peripherals to your new SY-7IWM-X Motherboard, please refer to SY-7IWM
Краткое содержание страницы № 9
Configure Memory Your board comes with three DIMM sockets, and provides support up to 512MB main memory using DIMM modules from 8MB to 256MB. 1 2 MHz 2. y y FSB For 66MHz Jumper Setting (JP2,JP3) If the Motherboard fails to detect 66MHz FSB when using Celeron FCPGA & Celeron PPGA CPU., Please check the CPU FSB jumper settings on the Motherboard. 1 2 3 1 2 3 123 123 9 Hardware Installation Open JP3 Open JP2 Automatic Short pin 1-2 Short pin 1-2 66MHz JP3 JP2 FSB S
Краткое содержание страницы № 10
CMOS Clear (JP5) In some cases the CMOS memory may contain wrong data, follow the steps below to clear CMOS memory. 1. Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. This jumper can be easily identified by its white colored cap. 2. Then put the jumper back to 1-2 to allow writing new of data into the CMOS memory. Short pin 2-3 for Short pin 1-2 to at least 5 seconds to retain new settings JP5 Setting clear the CMOS 1 2 3 1 2 3 10 Hardware Installation performing the CMOS Cl
Краткое содержание страницы № 11
3 Quick BIOS Setup 3 This Motherboard does not require any hardware jumpers to set the CPU operating frequency. Instead, CPU settings are software configurable through the BIOS [Frequency Control]. The [Frequency Control] menu combines the main parameters that you need to configure your system. They are all in one menu to enable a quick setup in BIOS. After completion of hardware installation, turn the power switch on, then press the key while the system diagnostic is checking to enter the
Краткое содержание страницы № 12
4 The SOYO CD 4 The SOYO-CD will NOT autorun if you use it on an Operating System other than Windows 9x or NT. Your SY-7IWM-X Motherboard comes with a CD-ROM labeled "SOYO CD." The SOYO CD contains (1) the user's manual file for your new Motherboard, (2) the drivers software available for installation, and (3) a database in HTML format with information on SOYO Motherboards and other products. Insert the SOYO CD into the CD-ROM drive The SOYO CD will auto-run, and the SOYO CD Start Up Menu will
Краткое содержание страницы № 13
The user's manual files included on the SOYO CD are in PDF (Postscript Document) format. In order to read a PDF file, the appropriate Acrobat Reader software must be installed in your system. Note: The Start Up program automatically detects if the Acrobat Reader utility is already present in your system, and otherwise prompts you on whether or not you want to install it. You must install the Acrobat Reader utility to be able to read the user's manual file. Follow the instructions on your screen
Краткое содержание страницы № 14
drive r revision: Intel Whitney VGA Drivers for Win 9x Intel Whitney VGA Drivers for NT 4.0 Intel .inf utility for Win 9x/2000 Intel Whitney security utility for Win 9x/N T Intel Ultra ATA Storage Driver for Win 98/98SE/98ME/NT/200 0 Sigmatel Audio Application Sigmatel Staggato Gold Application for Win 95/98/NT Whitney Winbond hardware doctor for win 95/98 Cance l O K (Driver Installation Menu) A short description of all available drivers follows: Ø Ø Ø Ø f T . Ø The Intel Ultra ATA S
Краткое содержание страницы № 15
Ø Ø Your motherboard comes with a hardware monitoring IC. By installing this utility Temperature, Fan speed and Voltages can be monitored. It is also possible to set alarms when current system values exceed or fall below pre-set values. Select which driver you want to install and click OK, or click Cancel to abort the driver installation and return to the main menu. Note: Once you have selected a driver, the system will automatically exit the SOYO CD to begin the driver installation program. W
Краткое содержание страницы № 16
? 1. Press “ ” • • – 16 card by using too much force. the AGP card to allow the card to go further down. Do take care not to damage the real hard, it should snap twice. You may have to unscrew card down into the socket did not get seated into the AGP slot fully and firmly. Please push your AGP card This is a common problem with AGP video cards. The reason is that your AGP card, it does not give me any video. Is my AGP slot bad? My PCI VGA card works fine with my system, but when I put in a n
Краткое содержание страницы № 17
17 is connected to the speaker out port on your sound card. Please make sure the speaker I do not get any sound from my sound card. What could be wrong? Audio Issues not properly recognize relatively new chipsets. install the south bridge driver from the SOYO CD, this is because Windows does has been installed correctly, then you need to If you are sure that the modem driver Why? modem to work. I have installed my modem drivers several times and I still cannot get my under integrated peripher
Краткое содержание страницы № 18
’ 18 http://www.soyo.com Please make sure you have the latest bios and driver from the SOYO web site at: I can not get my board to run properly. is enabled in the bios. Cyrix CPU, make sure the 'linear burst function' peripherals one by one to identify which one causes the lockup. If you are running a floppy drive controller, and see if it can boot from floppy. Then put back the the bios and exit. Next, unplug all other add-on cards except the video card and Please clear the CMOS via JP5 then c
Краткое содержание страницы № 19
n n . , : E - s : : m E - m l 19 support@soyo.n : ail Fax: +31-79-3637575 support@soyo.co.uk ail: E- Tel: +31-79-3637500 )181 569 4134 Fax: +44 (0 Technical Support: )181 569 4111 Tel: +44 (0 Technical Support: sales@soyo.nl : ail Em Fax: +31-79-3637575 sales@soyo.co.uk E-mail: Tel: +31-69-3637500 )181 569 4134 Fax: +44 (0 Sales )181 569 4111 Tel: +44 (0 europe.com Sales www.soyo- , www.soyo.nl Web Site: www.soyo.co.uk Web Site: Germany and United Kingdom Republic of Ireland Region Cover
Краткое содержание страницы № 20
u F m F ) m F S : T F F E T F E 20 support@soyo.co.jp E-mail: Fax: 81-3-33682199 81-3-33682188 : Tel Technical Support: soyo-jpn@soyo.co.jp E-mail: Fax: 81-3-33682199 81-3-33682188 : Tel Sales: info@soyo.co.kr -mail: www.soyo.co.jp Web site: ax: 82-2-712-5853 el: 82-2-717-4392 Japan Covered: Region Technical Support: SOYO Japan -mail: soyo@soyo.co.kr soyo@public.bta.net.cn E-mail: ax: 82-2-704-2619 ax: 86-10-62510388 el: 82-2-716-2850 : 86-10-62510089 Tel ales Technical Support: www.soyo.co
