Руководство по эксплуатации Renesas M32192T2-PTC

Краткое содержание страницы № 1

M32192T2-PTC
Converter for In-circuit Connection (for M32192FxxFP)
User’s Manual

Keep safety first in your circuit designs!
1. Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circu

Краткое содержание страницы № 2

1. Outline The M32192T2-PTC is a converter board for featuring the debugging function such as real-time tracing when using the SDI emulator, M32100T-SDI-E, M32170T-SDI, M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E with the M32192FxxFP. Compared with the M32100T3-SDI-E or M32100T5-SDI-E, more loss of trace information occurs when using with the M32100T-SDI-E, M32170T-SDI or M32100T2-SDI-E. For M32192T2-PTC, using with the M32100T3-SDI-E or M32100T5-SDI-E is recommended. 2. Package

Краткое содержание страницы № 3

5. Connection Procedure Connection to the M32100T-SDI-E or M32170T-SDI 5.1 For the M32100T-SDI-E, or M32170T-SDI. Interface cables of the pod probe (7) (1) Mount the NQPACK144SD on the user system (2) Connect the YQPACK144SD on the NQPACK144SD. (3) Secure the four corners of the YQPACK144SD with the YQ-GUIDE’s. M3T- PTC- CNV (6) (separately available) (4) Mount the M32192T2-PTC on the YQPACK144SD. Clock select switch (5) Set the clock select switch. (5) (6) Mount the M

Краткое содержание страницы № 4

Connection to the M32100 T 2- SDI - E, 5.2 For the M32100T2-SDI-E, M32100T3-SDI-E or M32100 T 3-SDI- E or M32100 T 5-SDI-E M32100T5-SDI-E. (1) Mount the NQPACK144SD on the user system Emulator main unit or (2) Connect the YQPACK144SD on the NQPACK144SD. Emulator probe (3) Secure the four corners of the YQPACK144SD with the YQ-GUIDE’s. (4) Mount the M32192T2-PTC on the YQPACK144SD. (6) (5) Set the clock select switch. Clock select switch (6) Connect the emulator prob

Краткое содержание страницы № 5

6. Selecting a Clock Mount an oscillator to X2 as shown in the diagram printed on the boar.d With the M32192T2-PTC, it is possible to select a clock supply X2 socket to the MCU by the clock select switch (SW1). Select a clock Connected to XIN pin of MCU supply as shown below. R1 0 However, when used with the M32192T2-PTC, the clock Connected to XOUT pin of MCU cannot be supplied from the user system. C1 C2 R4 (1) 20 MHz: R1 0 : 1M Ω R4 : 510 Ω Supplies the clock (X1: 20 MH

Краткое содержание страницы № 6

8. Precautions CAUTION Cautions to Be Taken for Emulator: For debugging, use this product in the combination with the SDI emulator, M32100-SDI-E, M32170T-SDI, M32100T2-SDI-E, M32100T3-SDI-E or M32100T5-SDI-E. When using with the M32100T-SDI-E or M32170T-SDI, the following restrictions are applied according to the MCU operating frequency. The M32192T2-PTC is recommended to use with the M32100T3-SDI-E or M32100T5-SDI-E. - More than 66 MHz: Compared with the M32100T2-SDI-E, M3210