Краткое содержание страницы № 1
Parallel PCI 1P
Quick Installation Guide
Introducing the Parallel PCI 1P
The Parallel PCI 1P high-speed parallel card provides one
additional parallel port to your system. Depending on
the model purchased, this board will fit into either Full or
Low Profile chassis.
Features and Benefits
• Conforms to PCI v2.2 Plug and Play
• Supports 32-/64-bit, 3.3V/5V PCI and PCI-X slots
• Full support for Windows-based software
• Reduces CPU load and improves system
performance dramatically
• Support
Краткое содержание страницы № 2
Layout Depending on the model purchased, the bracket mounted on your board may vary from the image displayed. Full profile bracket Parallel Port Figure 1. Layout Hardware Installation General instructions for installing the card are provided below. Since the design of computer cases and motherboards vary, refer to your computer’s reference manual for further information, if needed. Static Electricity Discharge may permanently damage your system. Discharge any static electricity build up in yo
Краткое содержание страницы № 3
3. Remove your computer’s cover. 4. Remove the slot bracket from an available PCI slot. 5. To install the card, carefully align the card's bus connector with the selected PCI slot on the motherboard. Push the board down firmly, but gently, until it is well seated. 6. Replace the slot bracket holding screw to secure the card. 7. Replace the computer cover and reconnect the power cord. Driver Installation This section provides information on how to install the CyberParallel PCI drivers. Windows 9
Краткое содержание страницы № 4
3. Select Specify a location, uncheck the other boxes, insert the driver CD, type in D:\9x, then click Next. (Change D: to match your CD-ROM drive letter) 4. Click Next, then Finish. If prompted, at the Insert Disk box click OK. Insert your Windows 98 Installation CD-ROM then click OK. 5. Restart Windows to complete the installation. Windows ME 1. At the Add New Hardware Wizard, select Specify the location of the driver (Advanced), then click Next. 2. Check Specify a location, uncheck the othe
Краткое содержание страницы № 5
3. At the Welcome window, click Next. 4. Choose Install, then click Next. 5. Click Yes, then click Exit. 6. Click Yes to restart to complete the installation. To Verify Windows NT 4.0 Installation 1. Click Start, Programs, Administrative Tools, then Windows NT Diagnostics. 2. Click Resources tab, SIIGpar should be displayed. Windows 2000 1. At the Found New Hardware Wizard, click Next. 2. Select Search for a suitable driver for my device (recommended), then click Next. 3. Select Specify a locati
Краткое содержание страницы № 6
32-bit Windows XP/Server 2003 1. At the Found New Hardware Wizard, insert the driver CD. For XP w/SP1 or earlier/ Server 2003: go to step #2. For XP w/SP2 or later/Server 2003 wSP1 or later: select No, not this time, click Next. 2. Select Install the software automatically (Recommended, then click Next. 3. Click Finish. 4. Repeat steps 1-3 two more times. 5. Restart Windows to complete the installation. 64-bit Windows XP/Server 2003 1. At the Found New Hardware Wizard, insert the driver CD. For
Краткое содержание страницы № 7
™ Windows Vista 1. At the Found New Hardware window, insert the driver CD, click Locate and install driver software (recommended), then click Continue. Note: Windows Vista driver installation process may take several minutes to complete. 2. Click Next, then click Close to complete the installation. To Verify Windows Vista Installation 1. Right click Computer, click Manage, click Continue, then click Device Manager. 2. Click on the + (plus sign) in front of Ports (COM & LPT), SIIG CyberPro Paral
Краткое содержание страницы № 8
Blank Page 8
Краткое содержание страницы № 9
Blank Page 9
Краткое содержание страницы № 10
Blank Page 10
Краткое содержание страницы № 11
Technical Support and Warranty QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at www.siig.com and click Support. Our online support database is updated daily with new drivers and solutions. Answers to your questions could be just a few clicks away. You can also submit questions online and a technical support analysts will promptly respond. SIIG offers a lifetime manufacturer warranty with this product. Please see our web site for more warranty details. If you enco
Краткое содержание страницы № 12
About SIIG, Inc. Founded in 1985, SIIG, Inc. is a leading computer upgrade manufacturer of I/O connectivity products, including PCI & ISA serial and parallel ports, USB, Serial ATA & UltraATA controllers, FireWire (1394a/b), networking, sound cards, and other accessories. SIIG is the premier one-stop source of upgrades. SIIG products offer comprehensive user manuals, many user-friendly features, and are backed by an extensive manufacturer warranty. High-quality control standards are evident by
