Краткое содержание страницы № 1
®
Intel I/O Processors
Linux - Debian Installation Guide
June 2005
Order Number: 306507001US
June 2005
Краткое содержание страницы № 2
Legal Lines and Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNES
Краткое содержание страницы № 3
Contents—Linux - Debian Contents 1 Introduction......................................................................................................................................5 2 Host Setup.......................................................................................................................................6 2.1 Minicom Setup ......................................................................................................................8 2.2 Host Networking Setup ....
Краткое содержание страницы № 4
Linux - Debian—Contents Revision History Date Revision Description June 2005 001 Initial Release. ® June 2005 Intel I/O Processors Installation Guide 4 Order Number: 306507001US
Краткое содержание страницы № 5
Introduction—Linux - Debian Introduction 1 The following instructions were validated using an IA host system running Fedora Core 3. The target is an IQ80331 booted in a Cyclone Microsystems* PCI Backplane. These instructions are also useful to those using a different setup, however there may be slight changes to accommodate different hosts or targets. Updates will be made to these instructions as changes are reported. ® Linux-Debian Installation Guide Intel I/O Processors June 2005 Order Numb
Краткое содержание страницы № 6
Linux - Debian—Host Setup Host Setup 2 After the base install of the Linux distribution, ensure that the following packages are installed. minicom: This is a terminal emulation package for viewing the serial port console output of the Linux target system. lrzsz: X, Y, and Z modem support. Native Development Tools:For building the cross tool chain, a native version of GCC must be installed as well as various utilities needed by the build of the cross tool chain. During the Fedora installation,
Краткое содержание страницы № 7
Host Setup—Linux - Debian On my Fedora Core 3 system, I have the following packages installed to meet these requirements: • coreutils-5.2.1-31 dhcp-3.0.1-11 gawk-3.1.3-9 gcc-3.4.2-6.fc3 gcc-c++-3.4.2-6.fc3 grep-2.5.1-31.2 libgcc-3.4.2-6.fc3 lrzsz-0.12.20-19 make-3.80-5 minicom-2.00.0-19 openssh-3.9p1-7 openssh-clients-3.9p1-7 openssh-server-3.9p1-7 nfs-utils-1.0.6-44 sed-4.1.2-4 system-config-nfs-1.2.8-1 telnet-0.17-30 tftp-0.39-1 tftp-server-0.39-1 Note: When
Краткое содержание страницы № 8
Linux - Debian—Host Setup 2.1 Minicom Setup Follow these steps to configure the minicom terminal emulator: 1. Log in as root 2. Start minicom setup (“minicom -s”) 3. Select [Serial port setup] a. Change Serial Device to the appropriate com port (/dev/ttyS0 is COM1, /dev/ttyS1 is COM2 etc.) b. Change Bps/Par/Bits to 115200 8N1, this is the default setting for all the Customer Reference Board Evaluation Platforms. c. Change all flow control settings to No/Off 4. Select [Modem and dialing paramet
Краткое содержание страницы № 9
Host Setup—Linux - Debian 2.3 DHCPD Server Setup Create or edit the file /etc/dhcpd.conf. The actual dhcpd.conf file may be different than this depending on the needs, however, this is a reasonable starting point. deny unknown-clients; ddns-update-style ad-hoc; allow bootp; subnet 192.168.0.0 netmask 255.255.255.0 { } group { option broadcast-address 192.168.0.255; option domain-name "xscale-iop.net"; option routers 192.168.0.1; option subnet-mask 255.255.255.0; host myiop.xscale.net { # put yo
Краткое содержание страницы № 10
Linux - Debian—Host Setup 2.4 NFS Server Setup ® When Intel XScale microarchitecture-Linux target is using NFS for its root file system, it is necessary to export the appropriate directory via the NFS Server. These instructions assume the NFS mounted root file system is located on the server as “/exports/fs.xscale”. Edit the file “/etc/exports” and add the following line: /exports/fs.xscale *(rw,no_root_squash,sync) Create the NFS shared directory: # mkdir /exports/fs.xscale Start NFS server
Краткое содержание страницы № 11
Target Firmware Setup—Linux - Debian Target Firmware Setup 3 ® Connect the ethernet port of the Intel XScale microarchitecture CRB to the server secondary ethernet controller via a crossover cable or connect them both to a GbE hub. Connect the serial port of the CRB to the serial port of the server. Running “minicom” should allow viewing of the RedBoot console output from the board. Ensure that the latest RedBoot is installed on the CRB. Currently the 20050321 IOP RedBoot release is the late
Краткое содержание страницы № 12
Linux - Debian—Target Firmware Setup When preferred, use the TFTP server to download the images. This is much faster that XModem. Copy the {board}-rom\install\bin\redboot.srec and {board}-ram\install\bin\redboot.srec to the TFTP server under unique names such as redboot-rom.srec and redboot-ram.srec. Then issue the following command sequence: RedBoot> load -m tftp redboot-ram.srec RedBoot> fis unlock -f {flash-addr-ram-img} -l {img_len} RedBoot> fis create RedBoot[backup] -f {flash-addr-ram-im
Краткое содержание страницы № 13
Cross Toolchain—Linux - Debian Cross Toolchain 4 ® The next step in building a Linux system for running on Intel XScale microarchitecture is to generate a cross-toolchain for building the kernel and applications from the IA Linux host. Currently, we use a toolchain built using the crosstool build scripts (http://kegel.com/crosstool). We currently build for the armv5l-linux target. After the latest version of the script is downloaded a couple changes need to be made: 1. Edit the arm-xscale.dat
Краткое содержание страницы № 14
Linux - Debian—Kernel Kernel 5 The next step is to build an appropriate kernel. IOP Kernel patches are available at http:// sourceforge.net/projects/xscaleiop/. Grab the latest 2.6 kernel patch, and the corresponding kernel source tarball from http://www.kernel.org/. The following commands will configure the 2.6.10 IOP kernel for an IQ80331 platform. $ mkdir ~/work $ cd ~/work $ wget http://aleron.dl.sourceforge.net/sourceforge/xscaleiop/patch-2.6.10-iop1.bz2 $ wget http://www.kernel.org/pub/l
Краткое содержание страницы № 15
Kernel—Linux - Debian Now test that the kernel boots. It is OK for there to be no root file system at this point. This is only a trial test of the kernel. Table 2 gives the parameter values for each of the SCD CRBs. Table 2. Kernel Parameter Values for CRBs {board} {kernel-load-addr} {kernel-run-addr} {ramdisk-load-addr} {ramdisk-run-addr} iq8033x 0x01008000 0x01008000 0x00800000 0x00800000 iq80321 0x01008000 0xa1008000 0x00800000 0x00800000 ep80219 0x01008000 0xa1008000 0x00800000 0x00800000
Краткое содержание страницы № 16
Linux - Debian—Kernel Built 1 zonelists Kernel command line: ip=boot root=nfs console=ttyS0,115200 cachepolicy=writeallc PID hash table entries: 1024 (order: 10, 16384 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB = 128MB total Memory: 126720KB available (2289K code, 445K data, 320K init) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Testing wr
Краткое содержание страницы № 17
Distributions—Linux - Debian Distributions 6 There are numerous choices for the root file system or distribution. Some distributions, such as Debian, are desktop-type distributions that have been ported to the ARM processor family. These distributions will give much flexibility in terms of application availability and an active developer community. These distributions will typically take a reasonably large amount of disk space and will likely be inappropriate for installation into a flash d
Краткое содержание страницы № 18
Linux - Debian—Distributions 6.1 Installing Debian See http://www.debian.org for more information on the Debian distribution. There are three main branches of Debian: stable (currently codenamed Woody), testing (currently codenamed Sarge), and unstable (currently codenamed Sid). (See http://www.debian.org/releases/ for more information). Installers for both Testing and Unstable exist; however, there were issues installing directly. When interested in either of these releases, install the stab
Краткое содержание страницы № 19
Distributions—Linux - Debian 6. There is an issue with the dpkg program that is part of the Debian installer. It fails to create lock files correctly when they are located on an NFS drive. The particular lock files are located in /target/var/lib/dpkg, so we will address this issue by creating a RAM disk and mounting it as /target/var/lib. Execute the following commands: # mke2fs /dev/ram1 # mkdir -p /target/var/lib # mount -t ext2 /dev/ram1 /target/var/lib # exit 7. Scroll to “Configure the h
Краткое содержание страницы № 20
Linux - Debian—Distributions At this point the Base Installation is complete and the board should reboot to the RedBoot prompt. When wanting to install to a locally attached hard disk, a similar procedure can be used with changes as follows: In step 2 above, the installer should detect the hard disk and prompt for a partition and format the disk rather than having to enter NFS information. Additional installation steps may be useful depending on the needs; swap disks, additional partitio
