Краткое содержание страницы № 1
®
USE AND CARE GUIDE
MANUAL DEFROST
COMBO® MODELS
ICE MAKERS
CO29 CO1175 BI2115
SP18 BI95 BI98
The Built-In Undercounter Leader Since 1962 U-LINE.COM
Краткое содержание страницы № 2
Introduction Please Record Your Model Information You will need your product model and serial number when you request additional information or services. You can find this information on the serial plate located on the upper right or back Congratulations on your purchase of a U-Line refrigeration wall in the interior of your product. This information also appears product. on the warranty registration card. Building on 45 years, U-Line has captivated those with an appreciation for the finer
Краткое содержание страницы № 3
U-Line Use and Care Guide ii
Краткое содержание страницы № 4
1 Table of Contents U-LineCombo® Models and Ice Makers i - Introduction .................................................................................................................................................................i Read and save this Use and Care Guide. .........................................................................................................i Please Record Your Model Information ..................................................................................
Краткое содержание страницы № 5
2 Safety Precautions General Precautions Use this appliance for its intended purpose only and follow these IMPO IMPOR RT TANT ANT general precautions with those listed throughout this guide: • PLEASE READ all instructions before installing, operating, or servicing the appliance. DANGER RISK OF CHILD ENTRAPMENT. Before you throw away your • Proper installation procedures must be followed when old refrigerator or freezer, take off the doors and leave shelves completing an installation or relo
Краткое содержание страницы № 6
3 Product Features Ice Makers Feature: Combo® Models Feature: High ice production and storage. BI2115 and BI98 models Mechanical Temperature Control. Provides ability to set the produce up to 25 pounds of ice per day and store 25 pounds. BI95 temperature. and SP18 models produce up to 23 pounds of ice per day and ® Models produce up to 18 pounds of store 12 pounds. Combo Adjustable tempered glass shelves. Sleek, streamlined ice per day and store 13 pounds and provide both ice production
Краткое содержание страницы № 7
1 Product Operation Initial Startup Air Flow All U-Line controls are preset at the factory. Initial startup requires no adjustments. IMPO IMPOR RT TANT ANT The unit requires proper airflow to perform at its highest IMPO IMPOR RT TANT ANT efficiency. Do not block the front grille, found at the U-Line recommends allowing the unit to run overnight bottom of the unit, at any time, or the unit will not before loading refrigerator or freezer with product. perform as expected. Do not install the
Краткое содержание страницы № 8
C O L Adjusting AirTemperature Checking Product Temperature Combo Models IMPO IMPOR RT TANT ANT • Adjust the set point temperature in single increments, and wait 24 hours for the temperature to stabilize before rechecking. • Factory recommended set-point is MID setting on dial control. To adjust the set point temperature: Adjust the temperature by turning the numbered dial (1) in small increments. To check the actual product temperature in the unit. 1. Partially fill a plastic (nonbreakable)
Краткое содержание страницы № 9
5Ice Maker Ice Maker Operation Ice Maker Adjustment Ice Cube Thickness Adjustment. When the ice bucket is full, the ice making mechanism will shut off. Interval - As Required However, the refrigeration system will continue to cool and maintain the cube supply. Frost-free ice maker units have lower ice On ice maker equipped models, adjust the cube size by changing production than manual defrost units. water amount injected into the ice maker assembly as follows: IMPO IMPOR RT TANT ANT Do not
Краткое содержание страницы № 10
6 Maintenance Removing and Installing Interior Shelves Leveling IMPO IMPOR RT TANT ANT Unit must be level, for proper door and ice maker (if equipped) operation. For models equipped with glass shelves having shelf supports, remove the shelves as follows: 1 1. Open door completely. 2. Grasp the shelf edge in the center and slide the shelf from the unit. For Models with adjustable leveling feet: Insert the shelves as follows: 1. Use a level to check the levelness of the unit from front to back
Краткое содержание страницы № 11
Ice Maker Models Removing and Installing Grille 1 WARNING 2 Disconnect electric power to the unit before removing the grille. WARNING 4 DO NOT touch the condenser fins(4). The condenser fins are SHARP and can be easily damaged. 6 1 Removing the grille. 1. Disconnect power to the unit. 2. Remove control knob (6) if equipped. 3. Loosen the two screws (1). Some models may have only one screw in the center. 4. Remove grille (2) and grille cap (if equipped)(3) from unit. Installing the grille: 2 5
Краткое содержание страницы № 12
To reverse the door: 7 Standard Doors Remove grille: Remove the grille see MAINTENANCE section of this guide. Door Alignment and Adjustment Align and adjust the door if it is not level, or is not sealing properly. If the door is not sealed the unit may not cool properly, or excessive frost may form in the interior. IMPO IMPOR RT TANT ANT Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket
Краткое содержание страницы № 13
1 Install bottom hinge: Prepare door for reinstallation: 1. If you have a plate hinge, reorient the pivot screw so it protrudes the opposite direction form the hinge. Remove the For black or white doors: pivot screw from the hinge. Turn the plate over and reinstall 1. Remove plastic hole plug from top of door handle and reinstall the screw. on opposite side. 2. Align hinge outer edge with cabinet. For models with a plate 2. Remove plastic hinge bushing on bottom of door and reinstall on hi
Краткое содержание страницы № 14
8 Self-Closing Doors Door Alignment and Adjustment Align and adjust the door if it is not level, or is not sealing properly. If the door is not sealed the unit may not cool properly, or excessive frost may form in the interior. IMPO IMPOR RT TANT ANT • Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door 4 (no gaps). Carefully examine the door’s gasket to ensure that it is firmly in contact with the cabinet. Also 5. After adjustment i
Краткое содержание страницы № 15
To reverse the door: Remove existing bottom hinge. Remove the existing bottom hinge (three screws) (2). Reinstall hinge to top opposite. 3 1 Install the hinge just removed from the bottom to the TOP opposite side of the cabinet (three screws) (2). Reinstall Hole Plugs. Install plastic screw plugs (three each, top and bottom) (3) into holes where hinge hardware was removed. 2 Remove door: 1 1. Hold door to keep it from falling. 2. Remove hinge screw pin (1) from top hinge using a Phillips scre
Краткое содержание страницы № 16
. 9 Cleaning Defrosting Manual Defrost Models Exterior Cleaning Unit is a manual defrost model that will require occasional Vinyl Clad (Black or White) Models: defrosting. When there is build-up of 1/4” or more, manually defrost the unit. Defrost every two months minimum. • Clean surfaces with a mild detergent and warm water solution. Do not use solvent-based or abrasive cleaners. Use a soft • Ensure the door is closing and sealing properly. sponge and rinse with clean water. Wipe with a so
Краткое содержание страницы № 17
Condensor Cleaning Storage, Vacation and Moving Interval - Every Six Months If not using the unit for an extended period, or otherwise stored, follow these steps completely: To maintain operational efficiency, keep the front grille free of dust and lint, and clean the condenser every three months. Depending WARNING on environmental conditions, more or less frequent cleaning may be necessary. Electrical Shock Hazard. Disconnect power before servicing. Before operating, replace all panels. Fa
Краткое содержание страницы № 18
10 Service Troubleshooting Guide Before Calling for Service DANGER If you think your U-Line product is malfunctioning, read the OPERATION section of this guide to understand clearly the ELECTROCUTION HAZARD. Never attempt to repair or function of the control. perform maintenance on the unit until disconnecting the If the problem persists, read the NORMAL OPERATING main electrical power. SOUNDS and TROUBLESHOOTING GUIDE section of this guide Troubleshooting - What to check when problems oc
Краткое содержание страницы № 19
U-Line Corporation Limited Warranty 1. U-Line Corporation ("U-Line") warrants each U-Line continue to be covered by the warranty terms set forth in product to be free from defects in materials and Paragraphs 1 and 2 above, to the extent such models: workmanship for a period of one year from the date of purchase. U-Line further warrants the sealed system A. Are subjected to temperatures between 50 and 100 (consisting of the compressor, the condenser, the degrees Fahrenheit. Although thes
Краткое содержание страницы № 20
® USE AND CARE GUIDE PRODUCT INFORMATION Installation Guides with complete installation information, Custom Wood Panel Size Specifications & Installation Instructions, CAD Drawings, Use and Care Guides, Specifications & Feature Benefits are available for viewing and download on-line at www.u-line.com/specs/. SERVICE INFORMATION If you have a problem with this appliance, your use and care guide has troubleshooting information to help you quickly identify common problems and provide informatio
