Краткое содержание страницы № 1
GA-K8NE
AMD Socket 754 Processor Motherboard
User's Manual
Rev. 1001
12ME-K8NE-1001
Краткое содержание страницы № 2
Motherboard GA-K8NE Motherboard GA-K8NE Apr. 11, 2005 Apr. 11, 2005
Краткое содержание страницы № 3
Copyright © 2005 GIGA-BYTE TECHNOLOGY CO., LTD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In
Краткое содержание страницы № 4
Table of Contents GA-K8NE Motherboard Layout ..................................................................................... 6 Block Diagram ............................................................................................................... 7 Chapter 1 Hardware Installation ................................................................................... 9 1-1 Considerations Prior to Installation ................................................................. 9 1-2 Feature
Краткое содержание страницы № 5
Chapter 3 Drivers Installation ..................................................................................... 45 3-1 Install Chipset Drivers ................................................................................... 45 3-2 Software Application ...................................................................................... 46 3-3 Software Information ..................................................................................... 46 3-4 Hardware Information ...........
Краткое содержание страницы № 6
GA-K8NE Motherboard Layout ATX_12V MS/KB SPDIF_I SPDIF_O Socket 754 ATX USB IDE1 IDE2 AUDIO1 CPU_FAN AUDIO2 Marvell 88E1111 FDD F_AUDIO GA-K8NE BAT PCIE_1 CLR_CMOS BIOS PCIE_2 ® CODEC nVIDIA TM nForce 4 - 4X PCIE_16 CI PCI1 CD_IN F_PANEL PCI2 IT8712 PCI3 SYS_FAN COMB - 6 - USB COMA LPT LAN DDR1 F_USB1 DDR2 F_USB2 DDR3 F_USB3 SATAII0_1 SATAII2_3
Краткое содержание страницы № 7
Block Diagram PCI-ECLK (100MHz) CPUCLK+/-(200MHz) AMD K8 (Note) DDR 400 /333/266/200MHz DIMM Socket 754 CPU DDR RAM Hyper Transport Bus PCI Express x 16 BIOS RJ45 2 PCI Express x 1 Marvell 4 Serial ATA 88E1111 ® nVIDIA ATA33/66/100/133 nForce4-4X IDE Channels PCI-ECLK (100MHz) x 1 x 1 Floppy LPC BUS PCI Express x 1 Bus LPT Port IT8712 PCI Bus COM Ports PS/2 KB/Mouse 24MHz CODEC 33MHz 10 USB Ports 3PCI PCICLK (33MHz) (Note) Because of CPU limitations, if you want to install DDR400 memory modules
Краткое содержание страницы № 8
- 8 -
Краткое содержание страницы № 9
English Chapter 1Hardware Installation 1-1 Considerations Prior to Installation Preparing Your Computer The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Thus, prior to installation, please follow the instructions below: 1. Please turn off the computer and unplug its power cord. 2. When handling the motherboard, avoid touching any metal leads or connectors. 3. It is best to wear an electrostatic d
Краткое содержание страницы № 10
1-2 Feature Summary TM CPU Socket 754 for AMD Athlon 64 processor (K8) 1600MH/z system bus Supports core frequencies in excess of 3000+ and faster ® Chipset nVIDIA nForce4-4X Chipset Supported on the Win 2000/XP operating systems Memory 3 DDR DIMM memory slots (supports up to 3GB memory) (Note 1) Supports DDR 400 /333/266/200 DIMM Slots 1 PCI Express x 16 slot 2 PCI Express x 1 slots 3 PCI slots IDE Connections 2 IDE connection (UDMA 33/ATA 66/ATA 100/ATA 133), allows connection of 4
Краткое содержание страницы № 11
English Hardware Monitor System voltage detection CPU temperature detection CPU / System fan speed detection CPU warning temperature CPU fan failure warning CPU smart fan control Onboard SATA RAID Onboard nForce4-4X chipset (SATAII0_1, SATAII2_3) - supports data striping (RAID 0) or mirroring (RAID 1) function or striping + mirroring (RAID 0+1) - supports data transfer rate of up to 150 MB/s - supports hot plugging function - supports a maximum of 4 SATA connections Supported on the Win
Краткое содержание страницы № 12
1-3 Installation of the CPU and Heatsink Before installing the CPU, please comply with the following conditions: 1. Please make sure that the motherboard supports the CPU. 2. Please take note of the one indented corner of the CPU. If you install the CPU in the wrong direction, the CPU will not insert properly. If this occurs, please change the insert direction of the CPU. 3. Please add an even layer of heat sink paste between the CPU and heatsink. 4. Please make sure the heatsink is installed o
Краткое содержание страницы № 13
English 1-3-2 Installation of the Heatsink Fig.1 Before installing the heat sink, please first add an even layer of heat sink paste on the surface of the CPU. Install all the heat sink components (Please refer to the heat sink manual for detailed installation instructions). Fig.2 Please connect the heat sink power connector to the CPU_FAN connector located on the motherboard so that the heat sink can properly function to prevent CPU overheating. The heat sink may adhere to the CPU as a result of
Краткое содержание страницы № 14
1-4 Installation of Memory Before installing the memory modules, please comply with the following conditions: 1. Please make sure that the memory used is supported by the motherboard. It is recommended that memory of similar capacity, specifications and brand be used. 2. Before installing or removing memory modules, please make sure that the computer power is switched off to prevent hardware damage. 3. Memory modules have a foolproof insertion design. A memory module can be installed in only on
Краткое содержание страницы № 15
English 1-5 Installation of Expansion Cards You can install your expansion card by following the steps outlined below: 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Remove your computer's chassis cover, screws and slot bracket from the computer. 3. Press the expansion card firmly into expansion slot in motherboard. 4. Be sure the metal contacts on the card are indeed seated in the slot. 5. Replace the screw to secure the slot br
Краткое содержание страницы № 16
1-6 I/O Back Panel Introduction PS/2 Keyboard and PS/2 Mouse Connector To install a PS/2 port keyboard and mouse, plug the mouse to the upper port (green) and the keyboard to the lower port (purple). Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. SPDIF_I (SPDIF In) Use SPDIF In feature only when your device has digital output function. SPDIF_O (SPDIF Out) The SPDIF output is capable of providing digital audio to external speakers or compres
Краткое содержание страницы № 17
English Side Speaker Out Connect the side surround speakers to this connector. You can use audio software to configure 2-/4-/6-/8-channel audio functioning. 1-7 Connectors Introduction 1 2 6 5 3 9 15 14 7 13 10 8 4 12 11 1) ATX_12V 9) F_AUDO 2) ATX (Power Connector) 10) CD_IN 3) CPU_FAN 11) F_USB1 / F_USB2/F_USB3 4) SYS_FAN 12) COMB 5) FDD 13) CI 6) IDE1 / IDE2 14) CLR_CMOS 7) SATAII0_1/SATAII2_3 15) BAT 8) F_PANEL - 17 - Hardware Installation
Краткое содержание страницы № 18
1/2) ATX_12V / ATX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed. Align the power connector with its proper location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies power to the CPU. If the ATX_12V power connector is not connected, the system will not
Краткое содержание страницы № 19
English 3/4) CPU_FAN / SYS_FAN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires. A red power connector wire indicates a positive connection and requires a +12V power voltage. The black connector wire is the ground wire (GND). Please remember to connect the power to the cooler to prevent system overheating and failure. C
Краткое содержание страницы № 20
6) IDE1 / IDE2 (IDE Connector) An IDE device connects to the computer via an IDE connector. One IDE connector can connect to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master and the other as Slave (for information on settings, please refer to the instructions located on the IDE device). 40 39 2 1 IDE2 IDE1 7) SATAII0_1 / SATAII2_3 (Serial ATA Connect
