Краткое содержание страницы № 1
2
Technisches Handbuch / Technical Manual
Mainboard D1419
Deutsch / English
Краткое содержание страницы № 2
Sie haben ... ... technische Fragen oder Probleme? Wenden Sie sich bitte an: • Ihren zuständigen Vertriebspartner • Ihre Verkaufsstelle Weitere Informationen finden Sie im Handbuch "Sicherheit und Ergonomie". Aktuelle Informationen zu unseren Produkten, Tipps, Updates usw. finden Sie im Internet: http://www.fujitsu-siemens.com Are there ... ... any technical problems or other questions you need clarified? Please contact: • your sales partner • your sales outlet You will find further info
Краткое содержание страницы № 3
Краткое содержание страницы № 4
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprimé sur du papier recyclé. Este manual ha sido impreso sobre papel reciclado. Questo manuale è stato stampato su carta da riciclaggio. Denna handbok är tryckt på recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Bestell-Nr./Order No.: A26361-D1419-Z120-1-7419 Printed in the Federal Republic of Germany AG 0303 03/03 A26361-D1419-Z120-1-7419 TECHNISCHES HANDBUCH
Краткое содержание страницы № 5
Deutsch English Mainboard D1419 Technisches Handbuch Technical Manual Ausgabe März 2003 March 2003 edition
Краткое содержание страницы № 6
Intel ist ein eingetragenes Warenzeichen der Intel Corporation, USA. PS/2 ist ein eingetragenes Warenzeichen von International Business Machines, Inc. Alle weiteren genannten Warenzeichen sind Warenzeichen oder eingetragene Warenzeichen der jeweiligen Inhaber und werden als geschützt anerkannt. Alle Rechte vorbehalten, insbesondere (auch auszugsweise) die der Übersetzung, des Nachdrucks, der Wiedergabe durch Kopieren oder ähnliche Verfahren. Zuwiderhandlungen verpflichten zu Schadenersatz. Alle
Краткое содержание страницы № 7
Contents Introduction........................................................................................................................................1 Notational conventions ..............................................................................................................1 Important notes..................................................................................................................................1 Information about boards.................................
Краткое содержание страницы № 8
Краткое содержание страницы № 9
Introduction This technical manual describes the mainboard D1419, which can be equipped with up to two Intel processors. You will find further information in the "BIOS Setup" description. Further information about drivers is provided in the readme files on the hard disk, on the supplied drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD. Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text mark
Краткое содержание страницы № 10
Important notes The shipped version of this board complies with the requirements of the EEC directive 89/336/EEC "Electromagnetic compatibility". Compliance was tested in a typical PC configuration. When installing the board, refer to the specific installation information in the operating manual or technical manual for the receiving device. Connecting cables for peripherals must be adequately shielded to avoid interference. Components can become very hot during operation. Ensure you do not touch
Краткое содержание страницы № 11
Features Features • ServerWorks GC LE533 chipset • two processor sockets for Prestonia or Nocona processors with 2.2 GHz and higher, socket 604, with 133 MHz Front Side Bus and quad pumped data bus • 512 Kbyte second level cache • 6 slots for main memory. PC2100 modules (registered DDR DIMM memory modules with 266 MHz and ECC) for 256 Mbyte up to 12 Gbyte main memory • one 64 bit PCI-X slot with 100/133 MHz • two 64 bit PCI-X slots with 100 MHz • one 64 bit PCI-X slot with 100 MHz (prepared for
Краткое содержание страницы № 12
Features Interfaces and connectors 1 2 3 4 5 6 23 22 7 8 9 10 11 12 13 21 20 19 17 16 15 14 1 = Floppy disk drive (TX300) 12 = IPMB 2 = Floppy disk drive (RX300) 13 = Connector NMI key 3 = Power supply ATX 14 = Reset 4 = PC98 15 = Cover monitoring 5 = Power supply 12 V 16 = SCSI channel B 6 = Fan connector for CPU 0 17 = SCSI channel A 7 = Fan connector for CPU 1 18 = Switch block 8 = Control panel 19 = Fan 2 (system) 9 = USB ports 2 / 3 20 = Fan 1 (system) 10 = IDE drives (primary) 21 = RSB (Re
Краткое содержание страницы № 13
Features External ports 1 2 3 8 7 6 5 4 1 = PS/2 mouse port 5 = VGA port 2 = Serial port COM2 6 = USB ports (2x) 3 = Parallel port LPT 7 = Serial port COM1 4 = LAN connector 8 = PS/2 keyboard port The components and connectors marked are not necessarily present on the mainboard. Temperature / System monitoring Temperature and system monitoring aim to reliably protect the computer hardware against damage caused by overheating. In addition, any unnecessary noise is also prevented by reducing the f
Краткое содержание страницы № 14
Features LAN connector This mainboard has a BCM5703C from Broadcom. This LAN controller supports the transfer rates of 10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The LAN controller is equipped with a 512 byte transmission and receiving buffer (FIFO) and supports WOL function through Magic Packet. It is also possible to boot a device without its own boot hard disk via LAN. Here Broadcom PXE is supported. The LAN RJ45 connector is equipped with an orange/green and a green LED (light emitting diode). 1 =
Краткое содержание страницы № 15
Features PCI bus resources PCI slots The following table shows an overview of the PCI slots: PCI slot 64bit/32b Frequency PCIX Description it in MHz 1 64 bit 100/133 yes 64 bit PCI bus slot 2 64 bit 100 yes 64 bit PCI bus slot 3 64 bit 100 yes 64 bit PCI bus slot, prepared for ZCR (= Zero Channel RAID) 4 64 bit 100 yes 64 bit PCI bus slot, prepared for riser card E313 5 64 bit 33 no 64 bit PCI bus slot PCI IRQ line x - Assignment of the PCI interrupts PCI IRQ Line x defines which ISA interrupts
Краткое содержание страницы № 16
Features A B C D Slot 1 PCI IRQ line 4 PCI IRQ line 5 PCI IRQ line 6 PCI IRQ line 7 Slot 2 PCI IRQ line 6 PCI IRQ line 7 PCI IRQ line 4 PCI IRQ line 5 Slot 3 PCI IRQ line 8 PCI IRQ line 9 PCI IRQ line 10 PCI IRQ line 11 Slot 4 PCI IRQ line 12 PCI IRQ line 13 PCI IRQ line 14 PCI IRQ line 15 Slot 5 PCI IRQ line 0 PCI IRQ line 1 PCI IRQ line 0 PCI IRQ line 1 VGA --- - SCSI* PCI IRQ line 10 PCI IRQ line 11 LAN** PCI IRQ line 2 - - - USB --- - A..D = Interrupt output of the PCI controller * : Interr
Краткое содержание страницы № 17
Features SCSI/Host RAID configuration utility The BIOS of the onboard U320 SCSI controller includes a menu-driven SCSI/Host RAID configuration program. This program allows you to change almost all of the option settings of the SCSI controller. When you boot the system a SCSI/Host RAID-BIOS message listing the SCSI devices connected is displayed. If an SCSI/Host RAID-BIOS error message appears or problems arise with SCSI devices, i please read the documentation of your SCSI device. If you are una
Краткое содержание страницы № 18
Features Ê To quit the Configuration program press the [ESC] key until a corresponding message is displayed. Select Yes to quit. Activating and Configuring Host RAID To configure Host RAID select the menu entry Configure/View Host RAID Settings. If this entry is not displayed you have to activate Host RAID with the entry Enable Host RAID Support. Now the existing SCSI hard disks and already configured RAID drives are displayed. Select one of the displayed hard disks and configure the RAID-System
Краткое содержание страницы № 19
Features Default Settings in the menu Configure/View SCSI Controller Settings SCSI Bus Interface Definitions Default setting SCSI Controller ID 7 SCSI Controller Parity Enabled SCSI Controller Termination Enabled Additional Options Default setting Boot Device Configuration Press Single Image Master SCSI Controller AIC-7902 at slot 00 00:04:00 Select SCSI peripheral from which to boot Boot SCSI Controller AIC-7902 at slot 00 00:04:00 Boot SCSI ID 0 Boot LUN number* 0 SCSI Device Configura
Краткое содержание страницы № 20
Features SCSI Bus Interface Definitions SCSI Controller ID All SCSI devices on one SCSI bus, including the SCSI controller, must be set to separate SCSI addresses. The SCSI controller is normally set to ID 7. You do not normally need to change the SCSI address, not even if you install several SCSI controllers. In this case each SCSI controller may be assigned address 7, because each is connected to it’s own SCSI bus. SCSI Controller Parity The U320-SCSI controller uses parity bits on the SCSI bu
