Краткое содержание страницы № 1
R
P/I-P55TVP4
Pentium Motherboard
USER'S MANUAL
Краткое содержание страницы № 2
USER'S NOTICE No part of this product, including the product and software may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan- guage in any form by any means without the express written permission of ASUSTeK COMPUTER INC. (hereinafter referred to as ASUS) except documentation kept by the purchaser for backup purposes. ASUS provides this manual "as is" without warranty of any kind, either express or implied, including but not limited to the implie
Краткое содержание страницы № 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. Marketing Info: Address: 150 Li-Te Road, Peitou, Taipei, Taiwan, ROC Telephone: 886-2-894-3447 Fax: 886-2-894-3449 Email: info@asus.com.tw Technical Support: Fax: 886-2-895-9254 BBS: 886-2-896-4667 Email: tsd@asus.com.tw WWW: http://www.asus.com.tw/ Gopher: gopher.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL Marketing Info: Address: 721 Charcot Avenue, San Jose, CA 95131, USA Telephone: 1-408-474-0567 Fax: 1-408-474-0568 Ema
Краткое содержание страницы № 4
CONTENTS I. INTRODUCTION........................................................................... 1 How this manual is organized .......................................................... 1 Item Checklist .................................................................................. 1 II. FEATURES .................................................................................... 2 Features of This Motherboard .......................................................... 2 Parts of the Mot
Краткое содержание страницы № 5
CONTENTS Details of Chipset Features Setup.......................................37 Power Management Setup........................................................ 40 Details of Power Management Setup .................................40 PNP and PCI Setup .................................................................. 42 Details of PNP and PCI Setup ............................................ 42 Load BIOS Defaults ................................................................. 44 Load Setup
Краткое содержание страницы № 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Краткое содержание страницы № 7
I. INTRODUCTION How this manual is organized This manual is divided into the following sections: I. Introduction: Manual information and checklist II. Features: Information and specifications concerning this product III. Installation: Instructions on setting up the motherboard. IV. BIOS Setup: BIOS software setup information. V. DMI Utility: BIOS supported Desktop Management Interface VI. ASUS PCI-SC200: Installation of an optional Fast-SCSI card. VII. ASUS I-A16C: Installation of an optional 1
Краткое содержание страницы № 8
II. FEATURES (Features) II. FEATURES Features of This Motherboard The P/I-P55TVP4 is carefully designed for the demanding PC user who wants a great many features in a small package. This motherboard: • Easy Installation: Is equipped with BIOS that supports auto detection of hard drives and Plug and Play to make setup of hard drives and expansion cards virtually automatic. • Multi-Processor Support: Supports one Pentium (75MHz-200MHz), Cyrix 166+ (Rev 2.7 or later), or AMD-K5 (PR 75, 90, 100
Краткое содержание страницы № 9
II. FEATURES • Optional IrDA and PS/2 Mouse Connector: This motherboard supports an optional infrared port module for wireless interface and a PS/2 mouse cable set. • NCR SCSI BIOS: This motherboard has firmware that supports the optional ASUS PCI-SC200 SCSI controller cards. Parts of the Motherboard Programmable Flash ROM 3 ISA Slots 3 PCI Slots Super Multi-I/O 1 DIMM Slot PCI 4 or ASUS MediaBus 2.0 72-pin SIMM Sockets Intel's 430VX PCIset CPU ZIF Socket 7 L2 Upgrade Cache Expansion Slot Onb
Краткое содержание страницы № 10
DIMM Slot (Bank 2) SIMM Slot 4 (Bank 1) SIMM Slot 3 (Bank 1) SIMM Slot 2 (Bank 0) SIMM Slot 1 (Bank 0) Floppy Drives JP1 JP2 Secondary IDE JP3 Pipelined Burst Level 2 Cache Expansion Slot Primary IDE PCI Slot 1 PCI Slot 2 Multi I/O JP9 Boot Program JP10 PCI Slot 3 PCI Slot 4 / MediaBus 2.0 JP5 JP6 ISA Slot 1 ISA Slot 2 Infrared Con. Case Conn (CON 1) ISA Slot 3 III. INSTALLATION (Map of Board) III. INSTALLATION Map of the Motherboard Keyboard PS/2 Mouse COM 1 COM 2 Super Multi I/O Parallel Prin
Краткое содержание страницы № 11
III. INSTALLATION Jumpers 1) JP9 p. 7 Multi-I/O Selection (Enable/Disable) 2) JP10 p. 7 Flash ROM Boot Block Program (Enable/Disable) 3) JP4 p. 8 Total Level 2 Cache Size Setting 4) JP7 p. 8 CMOS RAM (Operation/Clear CMOS Data) 5) JP16-22 p. 9 Voltage Regulator Output Selection 6) JP1, 2, 3 p. 10 CPU External Clock (BUS) Frequency Selection 7) JP5, JP6 p. 10 CPU:BUS Frequency Ratio Expansion Slots 1) SIMM Slots p. 11 DRAM Memory Expansion slots 2) DIMM Slot p. 13 SDRAM Memory Expansion slot 3) C
Краткое содержание страницы № 12
III. INSTALLATION (Jumpers) III. INSTALLATION Installation Steps Before using your computer, you must complete the following steps: 1. Set Jumpers on the Motherboard 2. Install DRAM Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Cabinet Wires, and Power Supply 6. Setup the BIOS Software 1. Jumpers Several hardware settings are made through the use of jumper caps to connect jumper pins (JP) on the motherboard. See "Map of the Motherboar
Краткое содержание страницы № 13
JP10 JP9 JP9 JP10 III. INSTALLATION Jumper Settings 1. Onboard Multi-I/O Selection (JP9) You can selectively disable each onboard Multi-I/O item (floppy, serial, paral- lel, and IrDA) through Chipset Features Setup of BIOS SOFTWARE or dis- able all Multi-I/O items at once with the following jumper in order to use your own Multi-I/O card. Selections JP9 Enable [1-2] (Default) Disable [2-3] 1 1 2 2 3 3 Enable (Default) Disabled Multi I/O Setting (Enable / Disable) 2. Flash ROM Boot Block Programmi
Краткое содержание страницы № 14
JP4 JP4 III. INSTALLATION (Jumpers) III. INSTALLATION 3. Total Level 2 Cache Size Setting (JP4) This jumper sets the total amount of L2 cache that is present. If you have two cache chips onboard (see "Map of Motherboard" for locations), then you have 256KB. A cache module can be used to upgrade the 256KB version to 512KB. If there is no onboard cache, you may install a cache module of either 256KB or 512KB. IMPORTANT: See "External Cache" for installation procedures. Regardless of your cac
Краткое содержание страницы № 15
III. INSTALLATION 5. Voltage Regulator Output Selection (JP16-JP20) These jumpers set the voltage supplied to the CPU. Determine whether your CPU has a single power plane or dual power planes and then the voltage that it uses. Current Intel CPU's marked "Pentium" has only a single power plane and uses the standard 3.38 volts (STD) or 3.5 volts (VRE). When a single power plane CPU is installed, the dual power plane selections will be automatically disabled. When a dual power plane CPU is ins
Краткое содержание страницы № 16
JP5 JP6 JP5 JP6 JP5 JP6 JP5 JP6 III. INSTALLATION (Jumpers) JP1 JP2 JP3 JP1 JP2 JP3 JP1 JP2 JP3 JP1 JP2 JP3 III. INSTALLATION 6. CPU External (BUS) Frequency Selection (JP1, JP2, JP3) These jumpers tell the clock generator what frequency to send to the CPU. These allow the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock times the BUS Ratio equals the CPU's Internal frequency (the advertised CPU speed). 7. CPU to BUS Frequency Ratio (JP5, JP6) These jumpers set the fr
Краткое содержание страницы № 17
Related III. INSTALLATION 2. System Memory (DRAM/SDRAM & SRAM) This motherboard supports four 72-pin SIMMs (Single Inline Memory Modules) of 4MB, 8MB, 16MB, or 32MB to form a memory size between 8MB to 128MB. The DRAM can be either 60ns or 70ns Fast Page Mode (Asymmetric or Symmetric) or EDO. SIMMs must be installed in pairs so that each bank contains two of the same size memory modules. A new feature is the support of Dual Inline Memory Mod- ules (DIMM). One slot is available for a 3.3Volt
Краткое содержание страницы № 18
III. INSTALLATION (DRAM Memory) III. INSTALLATION DRAM Memory Installation Procedures: 1. The SIMM memory modules will only fit in one orientation as shown because of a "Plastic Safety Tab" on one end of the SIMM slots which requires the "Notched End" of the SIMM memory modules. 1234 DRAM Memory Module Example Notched End Bank 0 Bank 1 72 Pin SIMM DRAM Sockets & Module 2. Press the memory module firmly into place starting from a 45 degree angle making sure that all the contacts are aligned with
Краткое содержание страницы № 19
III. INSTALLATION SDRAM Memory Installation Procedures: Insert the module as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation as shown. DRAM SIMM modules have the same pin contact on both sides. SDRAM DIMM modules have different pint contact on each side and therefore have a higher pin density. 88 Pins 60 Pins 20 Pins Lock 168 Pin DIMM Socket & SDRAM Module The Dual Inline Memory Module (DIMM) memory module must be 3.3Vo
Краткое содержание страницы № 20
III. INSTALLATION (External Cache) III. INSTALLATION Static RAM (SRAM) for Level 2 (External) Cache The motherboard you purchase may have either 0KB, 256KB, or 512KB onboard. If you have both onboard cache chips (see "Map of Motherboard" for locations) and a Cache Expansion Slot, then you have 256KB. If you only have onboard cache chips, then you have 512KB. An "ASUS" or "COAST" cache module can be used to upgrade the 256KB version to 512KB. If there is no onboard cache, you may install a ca
