Краткое содержание страницы № 1
AIR FILTRATION SYSTEM
WITH REMOTE CONTROL
Model 91393
ASSEMBLY AND OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
© ®
Copyright 2004 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Краткое содержание страницы № 2
PRODUCT SPECIFICATIONS 1 Motor / HP, 115 V, 60 Hz, 1 Phase 6 Overall Dimensions 30-1/8” x 24” x 12- 1/8” Outer and Inner Filter 5 Microns Noise 50-60 dB Air Flow High Speed - 360 CFM, Low Speed - 230 CFM Weight 66 Lbs. Power Cord 5’ 3” L, 3-Prong, UL Listed Remote Control Uses 2 “AAA” Batteries (included) SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assem- bly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. K
Краткое содержание страницы № 3
grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the product should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 5. Double insulated products are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does
Краткое содержание страницы № 4
16. Store idle products out of reach of children and other untrained persons. Products are dangerous in the hands of untrained users. 17. Maintain products with care. Keep products clean. Do not use a damaged product. Tag damaged products “Do not use” until repaired. 18. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the product’s operation. If damaged, have the product serviced before using. Many accidents are caused by poorly
Краткое содержание страницы № 5
ADDITIONAL WARNINGS GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the product. Never remove the grounding prong from the plug. Do not use the product if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet,
Краткое содержание страницы № 6
DOUBLE INSULATED PRODUCTS: PRODUCTS WITH TWO PRONG PLUGS 4. Products marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Stan- dard Association, and the National Electrical Code. (See Figure B.) 5. Double insulated products may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) FIG
Краткое содержание страницы № 7
6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. 8. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. FIGURE C SYMBOLOGY Double Insulated Canadian Standards Associatio
Краткое содержание страницы № 8
UNPACKING When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 13. CAUTION: Always make sure the Power Cord of the Air Filtration System is unplugged from it
Краткое содержание страницы № 9
FIGURE 1 FIGURE 2 Red Standby Mode Indicator Speed Indicators Timer Pull Indicators Chain (34) CONTROL OPERATION Note: These instructions apply to both the manual controls and the remote control. See Figures 1 and 2. 1. The Pull Chain (34) under the control panel switches between standby mode and totally off. When in standby mode the unit will operate when the on/off button on the remote or the panel is pressed. The Chain may break if pulled hard or abruptly. This Chain may be used to stop th
Краткое содержание страницы № 10
INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Make sure the Switch Box (19) of the Air Filtration System is in its “OFF” position and that the product is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. 2. BEFORE EACH USE, inspect the general condition of the Air Filtration System. Check for loose screws, misalignment or binding of moving parts, cracked or bro- ken parts, damaged electrical wiring, and any other condition tha
Краткое содержание страницы № 11
Troubleshooting Note: Any repairs suggested below should be completed by an authorized service technician. Trouble Probable Cause Correction Motor does not run 1. Blown fuse. 1. Replace fuse. when power switch 2. Switch is burned out. 2. Replace the Switch. is pressed on. 3. Connection wire is 3. Tighten or replace loose or damaged. the wire. Motor does not run 1. Power voltage is too low. 1. Test voltage. at full speed. 2. Motor is damaged. 2. Check and repai
Краткое содержание страницы № 12
PARTS LIST Pn artD. escriptio Qt tyPn arD. escriptio Qty 1rP2 leated Type Filte2w 0R4 ound Head Scre 2r32 -Pocket Type Filte 2w1H6 ex Scre 4wC8 ross Head Scre 2t2S1 afety Ne 5gF1 an Housin 2l 3O1 utlet Gril 6eF1 an Blad 2w4 S2 cre 7eA2 ir Guide Plat 2w 7H6 ex Head Scre 1 8dP1 ower Cor 2w 8R2 ound Head Scre 1t 0 N1 u 2r 9 W4 ashe 1g 2 B1 ushin 3t0 N4 u 1r 3C1 ondense 3e1 H2 andl 1r 4 M1 oto 3r 2 H4 ange 1g 5 B4 ushin 3t3 N4 u 1w 6S1 et Scre 3n 4P1 ull Chai 1t 7M1 ain Cabine 3l 5R1 emote Contro 1r
Краткое содержание страницы № 13
ASSEMBLY DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 91393 PAGE 13
