Краткое содержание страницы № 1
GVI dba Samsung CCTV
1621 West Crosby, Suite 104
Carrollton, TX 75006
Printed in Korea
PHONE : 866-492-8246
Part No. :14021-1282
Краткое содержание страницы № 2
B/W OBSERVATION SYSTEM Installation Manual SSC-12P
Краткое содержание страницы № 3
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
Краткое содержание страницы № 4
IMPORTANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor). 1. Read Instructions : All the safety and operating instructions should be read before E the appliance is operated. 2. Retain Instructions : The safety and operating instructions should be retained for future reference. 3. Heed Warnings
Краткое содержание страницы № 5
9. Ventilation : Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the monitor and to protect it from overheating, and these openings should never be blocked by placing the monitor on a bed, sofa, rug, or other similar surface. This monitor should never be placed near or over a radiator or heat register. This monitor should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or SAMSUNG’s instru
Краткое содержание страницы № 6
16. Servicing : Do not attempt to service this monitor yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 17. Damage Requiring Service : Unplug this monitor from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the monitor. c. If the monitor has b
Краткое содержание страницы № 7
FCC & ICES Information Warning This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interferen
Краткое содержание страницы № 8
Contents E IMPORTANT SAFEGUARDS..................................................... 3 1. System Components and Installation ........................................ 8 1-1. System Components........................................................... 8 1-2. System Configuration ........................................................ 9 1-3. Individual Component Installation................................... 10 1-4. Basic System Installation................................................. 21 2.
Краткое содержание страницы № 9
1. System Components and Installation 1-1. System Components STANDARD CAMERA MONITOR Mount-Corner PIR CAMERA CAMERA CABLE CAMERA MOUNT BRACKET INSTALLATION MANUAL Alarm Terminal-BLOCK 8
Краткое содержание страницы № 10
1-2. System Configuration Model Name Quantity Note Monitor SSC-12PM 1 Standard Camera SSC-12C 1 SCREWS (BH M3✕30,BH M3✕16), PIR Camera SMM-PIRCAM BW 1 Anchor (HUD5), Mount-Corner E Camera Mount Bracket SBR-110 1 SCREW 3EA(M4✕L15) MCB-60 1 Camera Cable MCB-100 1 Installation Manual 1 Alarm Terminal Block 1 9
Краткое содержание страницы № 11
1-3. Individual Component Installation 1) INSTALLING STANDARD CAMERA (SSC-12C) Caution to install SSC-12C outdoors 1. SSC-12C is designed to be protected from the water drops which are falling on the upper side of camera in a range of 15°. (Dust-water protection level : IP42) Therefore, be sure to install it in a location which is fit in above condition when you install it outdoor. SSC-12C camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-110). Choose an
Краткое содержание страницы № 12
2) CAMERA MOUNT BRACKET(SBR-110) & STANDARD CAMERA (SSC-12C) ! Overview CAMERA MOUNT BRACKET (SBR-110) is used to attach the camera to a wall, ceiling or shelf. @ Installation Explains the installation of CAMERA MOUNT BRACKET as well as the installation of the camera onto the CAMERA MOUNT BRACKET. E Choose an installation site that can sufficiently support the weight of the equipment to be installed. Attach the camera mount bracket to the wall using the supplied screws (M4 X L15). Adjus
Краткое содержание страницы № 13
Loosen the handle by turning it in a counter clockwise direction and then adjust the camera position. Tighten the handle, turning it clockwise, and lock the camera in position. Connect the camera cable to the camera. Handle # Specifications Use : Indoor Installation : Wall or Ceiling Dimensions : 57(W) ✕ 47.2(H) ✕ 100.5(L) Weight : 150g Operating Temperature : -10 °C ~ 50 °C $ Accessories SCREW (M4 ✕ L15) ............ 3 pcs 12
Краткое содержание страницы № 14
3) INSTALLING PIR CAMERA(SMM-PIRCAMBW) ! Camera installation Hints Do not install directly towards rising or setting sun. Can cause burn or damage to internal options. Do not limit desired detection zone by interference of curtains, screens, potted plants, etc. E Also, do not locate it in front of source of water/oilvapors. Avoid placement of heat source inside detection zone. Do not install outdoors. @ Installing the PIR Camera Choose an installation site that can sufficiently support
Краткое содержание страницы № 15
Remove the screw (BH M2. 6) at the bottom of the main unit by turning it counterclockwise, and then lift the assy-case front as you push it upward to detach it from the case-rear. (✳ Do not apply excessive force, as doing so may damage the inside assembly.) Assy-case front BH M2. 6 CASE-REAR Place the case-rear over the installation site and mark screw holes with a pencil (indicated by the red circles in the illustration). Drill a pilot hole for each pencil mark (5mm in diameter and at least
Краткое содержание страницы № 16
Connect the RJ-11 connector cable to the case-rear as well as the cable to be connected to the terminal. E Align the two holes of the case-rear to the holes of the plastic anchors, and then fasten the screw-tappings (BH M3 ✕ 30) SCREW-TAPPING (BH M3 ✕ 30) SCREW-TAPPING (BH M3 ✕ 30) 15
Краткое содержание страницы № 17
Adjust the direction of the lens. 1) Use the cross (+) screw driver to turn the screw (indicated by the arrow in the illustration) counterclockwise slightly. The lens body will move. 2) Tilt the lens body down about 10° from the horizontal, and then turn the screw clockwise to fasten it. SCREW Assemble the assy-case front onto the case-rear as shown in the illustration. Fasten the assy-case front to the case-rear with the screw (BH M2.6) you removed earlier. CASE-REAR ASSY-CASE FRONT BH M2.
Краткое содержание страницы № 18
# Installing the Camera using the Mount-Corner Choose an installation site that can sufficiently support 5 times the weight of the equipments to be installed. Place the mount-corner to the corner to which you want to install the camera and mark screw holes with a pencil (indicated by the blue circles in the illustration). Drill a pilot hole for each pencil mark (5mm in diameter and at least 35mm in depth), and then fully insert the supplied plastic anchors (HUD 5) into them. E Install the
Краткое содержание страницы № 19
Remove the screw (BH M2.6) at the bottom of the main unit by turning it counterclockwise, and then lift the assy-case front as you push it upward to detach it from the case-rear. (❊Do not apply excessive force, as doing so may damage the inside assembly.❊ ) Assy-case front Screw (BH M2.6) CASE-REAR Connecting Cables 1) Connecting the cables to the case-rear. Connect the RJ-11 cable to the RJ-11 connector on the case-rear and connect the camera cable to the cable terminal on the on the case-
Краткое содержание страницы № 20
2) Passing the cables through the hole on the mount-corner. Pass the cables through the hole on the mount-cornder as shown in the right picture below. E Assemble the case-rear onto the moun-tcorner by aligning the two holes of the case-rear to the protrusions of the mount-corner (indicated by the blue circles in the illustration) and fastening the screw-tappings (PH M3 X 16). SCREW-TAPPING (PH M3 x 16) SCREW-TAPPING (PH M3 x 16) 19
