Руководство по эксплуатации Philips PSC 604

Краткое содержание страницы № 1

PSC Windows 98SE Installation Notes


Installing a Philips Sound card (PSC 604 or 605) in a system that has Windows
98SE may require that a 98SE installation CD be inserted into a CD drive during
the sound card installation. This is a normal process required by the OS for the
purpose of loading additional sound processing files.

It is recommended that a Windows 98SE installation CD be made available
before installing a PSC. However if a 98SE install CD is not available an
alternate i

Краткое содержание страницы № 2

Installing “with” an available Windows 98SE installation CD. 1. Upon boot up, after installing the PSC hardware, cancel the “Found New Hardware Wizard” when it appears. 2. Insert the Philips installation CD. Note: If using a driver from the web double click the Web Driver .exe file and skip to step 4. 3. Select “Install Philips Sound Card Drivers” from the autolauncher panel when it appears. 4. Proceed with the installation normally until the following panel appears. 5. I

Краткое содержание страницы № 3

9. The following “Open” panel will appear after clicking the Browse button. 10. Select the appropriate CD drive, the drive that contains the Windows CD. 11. Select the “win98” folder. 12. The required file when located by the OS will be displayed as in the example base5.cab file above. 13. Click the OK button. The following “Copying files” panel will appear. 14. The “Copy files from:” location is now properly set. Click the OK button. 15. The installation will now p

Краткое содержание страницы № 4

Installing “without” a Windows 98SE installation CD NOTE: This is not the recommended installation method but is provided here as a work around solution until a Windows 98SE install CD can be obtained. 1. Upon boot up, after installing the PSC hardware, cancel the “Found New Hardware Wizard” when it appears. 2. Install the Philips installation CD. Note: If using a driver from the web double click the Web Driver .exe file and skip to step 4. 3. Select “Install Philips Sound Card

Краткое содержание страницы № 5

8. Continue clicking the “Skip File” button until all files have been skipped. The “Insert Disk” panel may re-appear, simply click the “OK” button then continue clicking the “Skip File” button until all files have been skipped. 9. The installation will now proceed normally, follow on-screen instructions to complete the PSC installation process. 10. Note: This method will result in the sound card being properly installed however the Game Port will not. 11. When a Windows

Краткое содержание страницы № 6

Canceling the PSC installation If during the PSC installation you determine that a Windows CD is not available you may cancel the installation. Follow the simple steps below to cancel. 1. When the Insert CD panel appears click the OK button. 2. We are assuming there is no 98SE CD to insert. 3. A “Copying Files” panel will appear: 4. Click the “Cancel” button. 5. After some delay (Installer is cleaning up) the following panel will appear:

Краткое содержание страницы № 7

6. The installer removes all installed PSC files and reverses all changes made during the installation. 7. Follow on-screen instructions to complete the abort process. NOTE: It is important to perform a reboot before attempting to reinstall the PSC drivers. 8. When a Windows 98SE CD is obtained the PSC installation process can be re- initiated. Please be aware that there is an alternative method in the event a 98SE installation CD cannot be obtained. See section Installing “without” a

Краткое содержание страницы № 8

Installing the Game Port driver During a PSC installation process if game port files were not loaded from the 98SE CD the game port will not be installed. The “Gameport Joystick” key in the Device Manager will have a warning symbol indicating the driver is not installed. See the example below. To install the Game Port driver follow the steps below. 1. Highlight the “Gameport Joystick” key then click the “Remove” button. 2. Click the “Refresh” button. 3. The Gameport Joysti

Краткое содержание страницы № 9

4. Insert the Windows 98SE CD into an available drive when prompted. Click the “OK” button. The following panel will appear. 5. Browse to the appropriate folder on the 98SE CD when the “Copying Files panel comes up. 6. Point to the correct drive and folder. 7. Make sure the file name is highlighted as above. 8. Click the “OK” button on the “Open” & “Copying Files” panels. 9. The Gameport installation will complete.

Краткое содержание страницы № 10

One Minute timeout message Early versions of installation software posted a message box (see below) that asked the user if more time is needed to insert the Windows 98SE CD. This method of operation is problematic and has been eliminated with V4.00 and above. If you encounter the above message we recommend that you download the latest driver for your PSC from the http://www.pcsound.philips.com/support.html webpage.