Краткое содержание страницы № 1
FUJITSU SEMICONDUCTOR
SS01-26015-1E
SUPPORT SYSTEM
2
F MC-8FX Family
LQFP-52P (0.65 mm pitch) HEADER BOARD
MB2146-261
OPERATION MANUAL
Краткое содержание страницы № 2
PREFACE 1 Thank you for purchasing the LQFP-52P (0.65 mm pitch) * header board (model number : 2 2 MB2146-261) for the F MC * -8FX family. MB2146-261 is a header board used to connect the MCU board (model number : MB2146-301, 2 MB2146-303) which mounts the F MC-8FX family evaluation MCU to a user system. This manual explains the handling of the MB2146-261. Before using MB2146-261, be sure to read this manual. Consult the Sales representatives or the Support representatives of Fujitsu Limited for
Краткое содержание страницы № 3
• The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. • The information, such as descriptions of function and application circuit examples, in this document are presented sole- ly for the purpose of reference to show examples of operations and uses of FUJITSU semiconductor device; FUJITSU does not warrant proper operation of the device with respect to use based on such information. When you devel
Краткое содержание страницы № 4
1. Product Outline ■ Product outline MB2146-261 is a header board (referred to as header board) used to connect the MCU board (model 2 number : MB2146-301, MB2146-303) which mounts an evaluation MCU in the F MC-8FX family 2 of Fujitsu 8-bit microcontrollers to a user system. To build an F MC-8FX evaluation environment, combine the three products as shown in Figure 1: the header board, a MCU board, and a BGM adapt- er (model number : MB2146-09). MCU board BGM adapter Header board Figure 1 System
Краткое содержание страницы № 5
2. Checking the Delivered Product Before using the MB2146-261, confirm that the following components are included in the box: 1 • LQFP-52P (0.65 mm pitch) header board * : 1 • Screws for securing header board (M2 × 10 mm, 0.4 mm pitch) : 4 2 • NQPACK052SB * : 1 3 • HQPACK052SB * : 1 • Operation manual (English version, this manual) : 1 *1 : Header board manufactured by Tokyo Eletech Corporation, referred to as “YQPACK”, mounts YQPACK052SB. *2 : IC socket manufactured by Tokyo Eletech Coporation
Краткое содержание страницы № 6
4. Notes on Designing ■ Notes on designing printed circuit board for the user system When the header board is connected to the user system, some part mounted around the NQPACK in the user system may be contacting the header board if the height of the part is tall. To prevent this, design the printed circuit board for the user system so that the components do not exceed the height shown in Figure 2. Figure 2 shows the dimension figure of the header board. PCW-1-1-1PW 40.0 mm :MAC EIGHT 30.0 m
Краткое содержание страницы № 7
■ MCU footprint design notes Figure 3 shows the recommended footprint dimensions of the NQPACK mounted on the printed cir- cuit board for the user system. Take the footprint in Figure 3 into consideration as well as the foot- print of the mass production MCU when designing the printed circuit board for the user system. To follow the most updated information, be sure to contact Tokyo Eletech Corporation whenever de- signing the printed circuit board. 0.4 mm 0.65 mm No.1 Pin Figure 3 Recommended
Краткое содержание страницы № 8
5. Connecting to the User System ■ Connecting Mount the supplied NQPACK on the user system before using the MB2146-261. 1. To connect the header board to the user system, match pin 1 indicated by the index mark (▲) on the NQPACK mounted on the user system with pin 1 indicated by the index mark (an angle cut linearly at one place only in silk screen) on the header board and then insert it (see “Figure 4”) . The pins of YQPACK are thin and easy to bend. Insert NQPACK after confirming that the pi
Краткое содержание страницы № 9
MCU board Evaluation MCU MCU board Screws for securing header board Header board Connected at shipment YQPACK NQPACK User system Figure 5 Connecting MCU Board/Header Board to User System ■ Disconnection 1. Remove the MCU board from the header board. Detach the four corners slowly in sequence, not excessively forcing the junction with the NQPACK. 2. Remove all of the four screws from the header board. Pull out the header board vertically from the NQPACK. Remove the header board slowly not exces
Краткое содержание страницы № 10
6. Mounting Mass Production MCUs ■ Mounting To mount a mass production MCU on the user system, use the supplied HQPACK (IC socket cover) (see “Figure 6”) . 1. To mount a mass production MCU on the user system, match the index mark (▲) on the NQ- PACK mounted on the user system with the index mark (●) on the mass production MCU. 2. Confirm that the mass production MCU is correctly mounted on the NQPACK. Next, match the index mark of HQPACK with the index mark of NQPACK and insert it (angle cut l
Краткое содержание страницы № 11
7. Product Specifications ■ General specifications Table 3 lists the general specifications of the header board. Table 3 General Specifications Item Description Operating temperature and storage temperature 5 °C to 35 °C (operation) , 0 °C to 40 °C (storage) Operating humidity and storage humidity 20 % to 80 % (operation) , 20 % to 80 % (storage) Approximately 40 mm × 40 mm × 16 mm Dimensions (Height contains that of YQPACK and NQPACK) ■ Main part The main part of a header board is shown
Краткое содержание страницы № 12
■ MCU board I/F connector (CN1, CN2, and CN3) CN1 and CN2 are MCU board I/F connectors. CN3 is the incorrect insertion prevention socket of a MCU board. The pin assignment of the MCU board I/F connector CN1 is shown in Table 5, and the pin assignment of the MCU board I/F connector CN2 is shown in Table 6. Table 5 Pin Assignment of the MCU Board I/F Connector CN1 Connector Connector Connector Evaluation Evaluation Evaluation Signal Signal Signal Pin MCU Pin Pin MCU Pin Pin MCU Pin name name n
Краткое содержание страницы № 13
Table 6 Pin Assignment of the MCU Board I/F Connector CN2 Connector Connector Connector Evaluation Evaluation Evaluation Signal Signal Signal Pin MCU Pin Pin MCU Pin Pin MCU Pin name name name Number Number Number Number Number Number 1 A10 PC5 41 E17 NC4 81 P16 P34 2 B10 PD0 42 E18 SEL0 82 P15 P35 3 C10 PC6 43 F15 SEL3 83 R18 P44 4 D10 PC7 44 F16 SEL4 84 R17 P36 5 A11 PD1 45 F17 SEL1 85 R16 P31 6 B11 PD2 46 F18 P04C 86 R15 AVcc3 7 C11 PD3 47 - GND 87 T18 P40 8 D11 PD4 48 - GND 88 T17 P32 9 A1
Краткое содержание страницы № 14
■ User system I/F YQPACK (U1) The pin assignment of user system I/F YQPACK in the header board is shown in Table 7. Table 7 Pin Assignment of the User System I/F YQPACK in Header Board Connector Connector Signal name Signal name Pin Number Pin Number 1 P61/S09/PPG11 27 VCC 2 P62/S10/TO10 28 Cpin 3 P63/S11/TO11 29 X1A 4 P64/S12/EC1 30 X0A 5 P65/S13/SCK 31 RSTX 6 P66/S14/SOT 32 P90/V3 7NC 33 NC 8 P67/S15/SIN 34 P91/V2 9 P14/PPG0 35 P92/V1 10 P13/TRG0/ADTG 36 P93/V0 11 P12/UCK0 37 P94/C0 12 P11/UO0
Краткое содержание страницы № 15
SS01-26015-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSTEM 2 F MC-8FX Family LQFP-52P (0.65 mm pitch) HEADER BOARD MB2146-261 OPERATION MANUAL April 2006 the first edition Published FUJITSU LIMITED Electronic Devices Edited Business Promotion Dept.
Краткое содержание страницы № 16
