Краткое содержание страницы № 1
SAT2510U2E
SAT2510BU2E
Instruction Manual
Serial ATA Hard Drive
Enclosure
2.5” eSATA/USB External Hard
Drive Enclosure for Serial ATA
Hard Drives
Краткое содержание страницы № 2
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no g
Краткое содержание страницы № 3
Table of Contents Introduction ..................................................................... 1 Packaging Contents.....................................................................1 System Requirements .................................................................1 Installation ....................................................................... 2 Hardware Installation ...................................................................3 Driver Installation .......................
Краткое содержание страницы № 4
Introduction This External Hard Drive Enclosure transforms most 2.5” SATA hard drives into a cost-effective portable storage solution . The 2.5” SATA hard drive enclosure connects to a host computer using USB 2.0 or eSATA with support for data transfer rates of up to 3Gbps (using eSATA) or 480Mbps (through USB 2.0). Packaging Contents • 1 x SAT2510U2E or SAT2510BU2E enclosure • 1 x eSATA cable • 1 x USB cable • 1 x Driver CD • 1 x Instruction Manual System Requirements • Available USB
Краткое содержание страницы № 5
Installation Power eSATA USB Power/Activity connector LED WARNING: Hard drives require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution. WARNING: Hard drives, like all computer equipment can also be severely damaged by static electricity. Be sure that you are properly grounded before opening your computer case or touching any components. StarTech.com recommen
Краткое содержание страницы № 6
Hardware Installation 1. Remove the screws from the enclosure, and remove the rear panel cover. Pull the front panel out of the enclosure: 2. Attach the 2.5” SATA hard drive to the connector provided: 3. Insert the front panel (with drive attached) into the rear panel (enclosure). 3
Краткое содержание страницы № 7
4. Fasten the front panel (with drive attached) to the rear panel (enclosure), using the screws removed in step #1. 5. To connect the hard drive enclosure to a host computer using USB, simply insert the included USB cable into the USB type Mini B slot provided by the enclosure, and the remaining end into an available USB type A slot on the host computer. 6. To connect the hard drive enclosure to a host computer using eSATA, simply plug the included eSATA cable from the enclosure to the hos
Краткое содержание страницы № 8
Verifying Installation Windows 2000/XP/Server 2003/Vista From the main desktop, right-click on “My Computer” (“Computer” in Vista), then select Manage. In the new Computer Management window, select Device Manager from the left window panel. Double-click on the “Disk Drives” option. A new disk drive should be listed under this category. It will typically contain the make/model of the hard drive you have installed in the enclosure. How to Use Windows 2000/XP/Server 2003/Vista 1. Right-click o
Краткое содержание страницы № 9
3. Right-click on the Unallocated block, and select New Partition. 4. This will launch the New Partition Wizard. Please follow the instruction provided by the Wizard, to partition the drive for use. 5. Once the partition has been created, the drive installed within the hard drive enclosure will be recognized as a New Volume in Disk Management, as well as in My Computer: 6
Краткое содержание страницы № 10
Specifica tions USB 2.0 Bus Interface SATA 3Gb/s 1 x USB mini B External Connectors 1 x eSATA port 1 x DC power connector Chipset JMircon JM20316 LEDs 1 x Power/Activity USB: 480 Mb/s Maximum Data Transfer Rate eSATA: 3 Gb/s 2.5” SATA 1.5 and 3 Gb/s hard Hard Drive Compatibility drives, 9.5mm height Dimensions 133.0 mm x 72.0 mm x 13.0 mm Weight 90 g Compatible Operating Windows 2000/XP/Server 2003/ Systems Vista, Mac OS X, Linux 7
Краткое содержание страницы № 11
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the
Краткое содержание страницы № 12
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.com today for com
