Краткое содержание страницы № 1
Product Manual
®
Pipeline HD
ST2000VM002
ST1500VM002
100633414
Rev. B
January 2011
Краткое содержание страницы № 2
Document Revision History Revision Date Description of changes Rev. A 07/12/2010 Initial release. Rev. B 01/07/2011 Added to the feature list; updated specifications © 2011 Seagate Technology LLC. All rights reserved. Publication number: 100633414, Rev. B January 2011 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/ or other countries. Pipeline HD and SeaTools are either trademarks or registered trademarks of Seagate Tech
Краткое содержание страницы № 3
Contents Seagate Technology Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 About the Serial ATA Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.0 Drive Specifications . . . . . . . . . . . . . . . . . . . . . . .
Краткое содержание страницы № 4
Pipeline HD SATA Product Manual, Rev. B
Краткое содержание страницы № 5
Figures Figure 1 Typical Current Profiles (5V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Figure 2 Typical Current Profiles (12V) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Figure 3 Attaching SATA cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Figure 4 Mounting dimensions (2000 and 1500GB models) . . . . . . . . . .
Краткое содержание страницы № 6
Pipeline HD SATA Product Manual, Rev. B
Краткое содержание страницы № 7
Seagate Technology Support Services For information regarding online support and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: • Presales & Technical support • Global Support Services telephone numbers & business hours • Authorized Service Centers For information regarding Warranty Support, visit http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance For information regarding data recovery services, visit http://www.i365.com For
Краткое содержание страницы № 8
8 Pipeline HD SATA Product Manual, Rev. B
Краткое содержание страницы № 9
1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate ® Pipeline HD SATA model drives: ST2000VM002 ST1500VM002 These drives provide the following key features: � 5900 RPM spindle speed � High instantaneous (burst) data-transfer rates with a default of 3Gb/s. Limit settings to 1.5Gb/s are available via S.M.A.R.T. Command Transport command. � Support for S.M.A.R.T. drive monitoring and reporting � Perpendicular recording, Tunneli
Краткое содержание страницы № 10
Introduction www.seagate.com In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disk drive in your current system and expect all of your existing applications to work as normal. The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship with Serial ATA dev
Краткое содержание страницы № 11
2.0 Drive Specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following drive models: ST2000VM002 ST1500VM002 2.1 Specification summary tables The specifications listed in the following tables are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual. Tab
Краткое содержание страницы № 12
Drive Specifications www.seagate.com Table 1 Drive specifications summary for 2000GB and 1500GB Models (Continued) Drive specification ST2000VM002 ST1500VM002 <17s <17s Power-on to ready (max) <17s <17s Standby to ready (max) <1.0ms read; <1.0ms read; Track-to-track seek time (typical) <1.2ms write <1.2ms write <12ms read; <12ms read; Average seek (typical) <13ms write <13ms write 2.0A 2.0A Startup current (typical) 12V (peak) 5V: ± 5% 5V: ± 5% Voltage tolerance 12V: ±10% 12V: ±10% (including n
Краткое содержание страницы № 13
www.seagate.com Drive Specifications 2.2 Formatted capacity Formatted Guaranteed Model Bytes per sector capacity* sectors 2000GB 3,907,029,168 4096 (512 bytes per sector emulated at the ST2000VM002 interface) 1500GB 2,930,277,168 4096 (512 bytes per sector emulated at the ST1500VM002 interface) *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing these drives i
Краткое содержание страницы № 14
Drive Specifications www.seagate.com 2.5 Physical characteristics Maximum height 2000GB and 1500GB models 26.1mm / 1.028 in Maximum width 101.6mm / 4.0 in (± 0.010 in) Maximum length 147.00mm / 5.78 in Typical weight 2000GB and 1500GB models 635g / 1.39 lb Cache buffer 2000 and 1500GB models 64MB (65,536kb) 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined
Краткое содержание страницы № 15
www.seagate.com Drive Specifications � Spinup power Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed. � Read/write power and current Read/write power is measured with the heads on track, based on a 16-sector write followed by a 32-ms delay, then a 16-sector read followed by a 32-ms delay. � Operating power and current (CE profile) Operating power is measured by simulating a typical PVR operating environment, using a 50% write, 50% r
Краткое содержание страницы № 16
Drive Specifications www.seagate.com Figure 1 Typical Current Profiles (5V) Figure 2 Typical Current Profiles (12V) 16 Pipeline HD SATA Product Manual, Rev. B
Краткое содержание страницы № 17
www.seagate.com Drive Specifications 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12V line or an equivalent 15-ohm resistive load on the +5V line. � Using 12V power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10MHz. � Using 5V power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 1
Краткое содержание страницы № 18
Drive Specifications www.seagate.com 2.9 Environmental specifications 2.9.1 Drive case temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Drive case temperature should be measured at the location indicated in Figure 4. Operating 0° to 75°C (32° to 167°F) Nonoperating –40° to 70°C (–40° to 158°F) 2.9.2 Temperature gradient Operating 20°C per hour (68°F per hour max), without condensation Nonoperating 30°C per hour (86°F per hour
Краткое содержание страницы № 19
www.seagate.com Drive Specifications 2000GB and 1500GB models The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2ms duration. 2.9.6 Vibration All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis, wit
Краткое содержание страницы № 20
Drive Specifications www.seagate.com 2.10 Acoustics Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward. For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the following equatio
