Краткое содержание страницы № 1
A Sierra Monitor Company
Driver Manual
(Supplement to the FieldServer Instruction Manual)
FS-8700-102 Honeywell Zellweger IR-148
Manual
APPLICABILITY & EFFECTIVITY
Effective for all systems manufactured after May 1, 2001
Driver Version: 1.01
Document Revision: 9
Краткое содержание страницы № 2
FS-FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Table of Contents TABLE OF CONTENTS 1. HONEYWELL ZELLWEGER IR-148 DESCRIPTION...................................................... 3 2. DRIVER SCOPE OF SUPPLY ........................................................................................ 4 2.1. Supplied by FieldServer Technologies for this driver.................................................. 4 rd 2.2. Provided by the Supplier of 3 Party Equipment ...............
Краткое содержание страницы № 3
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 3 of 19 1. Honeywell Zellweger IR-148 Description The Honeywell Infrared Gas Monitor (Model IR-148) detects solvents and gases such as HCFCs, HFCs and PFCs. IR-148 can have 1, 4 or 8 sampling points. This InfraTox driver reports gas values, alarms and troubles from IR-148 having either 1 or 8 sampling points. The serial driver can emulate a client or a server. The FieldServer and IR-148 device are connected using a RS-4
Краткое содержание страницы № 4
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 4 of 19 2. Driver Scope of Supply 2.1. Supplied by FieldServer Technologies for this driver FieldServer Technologies Description PART # FS-8917-16 RJ45 to terminal connector cable. FS-8700-102 Driver Manual. rd 2.2. Provided by the Supplier of 3 Party Equipment rd 2.2.1. Required 3 Party Hardware Part # Description NONE FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServ
Краткое содержание страницы № 5
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 5 of 19 3. Hardware Connections The FieldServer is connected to the Honeywell Zellweger IR-148 Device as shown in connection drawing. Configure the device according to manufacturer’s instructions OR FS-X40 INFRATOX UNIT + - G OTHER DEVICES Serial ORANGE/WHITE FS-X20 BROWN INFRATOX UNIT FS-8917-16 + - G BLUE/WHITE (408)-262-2299 Honeywell Zellweger IR-148 Device FieldServer Connection Diagram BASE NAME:
Краткое содержание страницы № 6
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 6 of 19 4. Configuring the FieldServer as a Honeywell Zellweger IR-148 Client For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FieldServer). This section documents and describ
Краткое содержание страницы № 7
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 7 of 19 4.2. Client Side Connection Descriptors Section Title Connections Column Title Function Legal Values Specify which port the device is P1-P8 (with 232/485 converter), R1- Port 1 connected to the FieldServer R2 Protocol Specify protocol used InfraTox or Infra-Tox Baud* Specify baud rate 19200 (Vendor limitation) Parity* Specify parity None (Vendor limitation) Data_Bits* Specify data bits 8 (Vendor limitation) S
Краткое содержание страницы № 8
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 8 of 19 Example // Client Side Nodes Nodes Node_Name, Node_ID, Protocol, Port DEV1, 1, InfraTox, R1 4.4. Client Side Map Descriptors 4.4.1. FieldServer Related Map Descriptor Parameters Column Title Function Legal Values Name of this Map Up to 32 alphanumeric Map_Descriptor_Name Descriptor characters Name of Data Array One of the Data Array where data is to be Data_Array_Name names from “Data Arr
Краткое содержание страницы № 9
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 9 of 19 4.4.3. Map Descriptor Example. With the following Map Descriptor, the Driver will capture and store data for all the all (8) sensors for Node (DEV1). For detailed information about the data storage see 0. Driver will capture Gas value, Alarms, Trouble, Lock and Blank messages. // Client Side Map Descriptors Map Descriptor Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Na
Краткое содержание страницы № 10
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 10 of 19 5. Configuring the FieldServer as a Honeywell Zellweger IR-148 Server For a detailed discussion on FieldServer configuration, please refer to the FieldServer Configuration Manual. The information that follows describes how to expand upon the factory defaults provided in the configuration files included with the FieldServer (See “.csv” sample files provided with the FieldServer). This section documents and descri
Краткое содержание страницы № 11
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 11 of 19 5.2. Server Side Node Descriptors Section Title Nodes Column Title Function Legal Values Up to 32 alphanumeric Node_Name Provide name for node characters Commonly used parameter but irrelevant for this driver as Protocol is node-less. A unique Node_ID is, however, Node_ID recommended for each 1-255 Honeywell Zellweger IR-148 Unit as it may be useful in exposing Node status information Protocol Specify
Краткое содержание страницы № 12
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 12 of 19 5.3.2. Driver Specific Map Descriptor Parameters Column Title Function Legal Values One of the node names Name of Node to which data Node_Name specified in “Server Node has to be sent. Descriptor” - section 5.2 1-Maximum of Data Array Length Length of Map Descriptor length. Name of Data Array used to One of the Data Array lock the sensor. Driver will Da_Byte_Array_Name* names from “Data Array” report d
Краткое содержание страницы № 13
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 13 of 19 5.3.3. Map Descriptor Example 1 Server using Data Array: The following Map Descriptor enables this Driver to send data for all 8 sensors to the Node (DEV1) connected at the FieldServer. See Appendix A for the Data Array format. The Driver can send Gas value messages, Alarm messages, Trouble messages and lock point messages. The driver can also be locked to send data for only one particular sensor. In thi
Краткое содержание страницы № 14
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 14 of 19 5.3.4. Map Descriptor Example 2: - Server using INI file: nd This Map Descriptor will enable the Driver to send the 2 line from the SMD1.ini to the node DEV1 irrespective of the contents. The line may contain up to 2000 characters. // Server Side Map Descriptors Map Descriptors Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset, Function, Node_Name Length Infra_Func SMD1.ini, Dummy,
Краткое содержание страницы № 15
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 15 of 19 Appendix A. Advanced Topics Appendix A.1. Supported Functions at a glance Message Types Notes Gas Value Message Message reports a gas value and units. Trouble Message Message reports a trouble for one sensor Message used to flash Honeywell Zellweger Blank Message IR-148 display Message reports an alarm (C/W/A) for one Alarm Message sensor Locked Point Message Unit is locked onto a single sample. Other 49 byte
Краткое содержание страницы № 16
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 16 of 19 b) Extended storage : If the FieldServer is configured to use extended storage then data will be stored as below Offset Sensor Contents Description Non-zero if alarm or a trouble has been reported. 0 1 Alarm or Trouble Zero if neither are currently being reported. 1 1 Alarm Type 0 = None, 1 = Caution, 2 = Warning, 3 = Alarm 2 1 Trouble 0=None, 1=Trouble Gas value multiplied by 100 is stored here. When 3 1 Gas
Краткое содержание страницы № 17
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 17 of 19 Appendix A.3. Driver stats In addition to the standard FieldServer operating statistics the driver can expose certain key stats in a Data Array which can then be monitored by an upstream device. Adding the following to the configuration file will activate these stats for a driver configured as a Client. // Expose Driver Operating Stats. Data_Arrays Data_Array_Name, Data_Format, Data_Array_Length Infra-stat
Краткое содержание страницы № 18
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 18 of 19 Appendix B. Driver Error Messages Some configuration errors might produce an error every time a poll is generated. This will fill the error buffer quickly and not add any clarity. For this reason the driver suppresses subsequent similar messages. Thus it is possible for the same error produced by multiple Map Descriptors to produce only one error message. Subsequent error messages can be seen on the driver messag
Краткое содержание страницы № 19
FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual Page 19 of 19 THIS PAGE INTENTIONALLY LEFT BLANK FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
