Руководство по эксплуатации ZALMAN CNPS9500 AT

Краткое содержание страницы № 1

User’s Manual
CNPS9500 AT
Intel Socket 1156/775 CPU
Core i7
Core i5
Core 2 Quad
Core 2 Duo
Core 2 Extreme
Dual Core Pentium
Pentium D
Pentium 4
Celeron D
To ensure safe and easy installation,
please read the following precautions.
www.ZALMAN.com
V 2.0

Краткое содержание страницы № 2

1. Precautions 1) Use and keep product away from reach of children and pets. 2) D o not ingest the Thermal Grease, and avoid its contact with skin and eyes. If contact is made with skin, wash off with water. If ingested or irritation persists, seek medical attention. 3) To prevent possible injuries, gloves must be worn while handling this product. 4) Excessive force exerted on the fan may cause damage to the fan and/ or system. 5) Avoid inserting objects or hands into the fan while it is in

Краткое содержание страницы № 3

3. Components Cooler Thermal Grease User’s Manual Clip Support Clip Support Fixing Bolts Washers Clip Clip Fixing Bolts Nuts 2 .COM

Краткое содержание страницы № 4

4. Installation Requirements 1) Space Requirements The cooler’s installation requires unobstructed space with dimensions of 90 (width), 115(length), 135(height), and the CPU as a central reference point. Please check if components such as ODDs and PSU protrude into the required space. 2) Air Guide Removal Air guides on enclosures must be removed, before the cooler’s installation, for they protrude into the cooler’s required space. 90 135 115 3) Cooler Orientation It is recommended that the coo

Краткое содержание страницы № 5

5. Installation 1) Clip Support Installation Install the Clip Support to the motherboard according to the Socket-type. Bolt (silver) Socket 1156 Clip Support Socket 775 Washer Nut Caution Please make note of the Lever Slot’s direction when installing the Clip Support. 2) Thermal Grease Application Clear off any particles or residue from the CPU’s surface then spread (outwards from center) a thorough layer of Thermal Grease on the CPU and the base of the cooler. 4 .COM M/B

Краткое содержание страницы № 6

3) Cooler Installation Insert the Clip Fixing Bolts to the Clip’s Installation Holes and fasten with a screwdriver. 4) Fan Connector Connect the Fan Connector to the motherboard’s PWM fan header (4-Pin). 5 .COM M/B

Краткое содержание страницы № 7

GS1000 / GS1000SE • E-ATX / Standard ATX / microATX Compatible * Supports Intel Dual Xeon server motherboards • UP to 6 Hot Swap HDD Bays * GS1000(3 Standard / 3 Optional) * GS1000 SE(Optional) • Tool-Free HDD Installation • Airflow Optimized Design • Vibration Absorbing HDD Dampers and Feet • The World’s First Roller Rails for Smooth & Easy PSU Installation • Cable Compartment Behind the Motherboard for Cable Management • Dedicated Fan Compartment for Fanless PSU Users • Up to a