Краткое содержание страницы № 1
CASE 5600 Series
USER Manual
www.rosewill.com
Краткое содержание страницы № 2
CASE 5600 series User Manual Contents Configuration P.2 Features Descriptions P.3 Installation 1. Opening Chassis P.5 2. Installing Motherboard P.6 P.8 3. Installing 3.5" HDD 4. Installing 5.25" Device P.9 5. Installing Add on Card P.10 6. Installing Floppy P.11 7. Cleaning Filters-Air guide Filter P.13 8. Cleaning Filters-Front panel Filter P.13 9. USB port P.14 10. IEEE1394 Port P.15 11. Audio Port P.16 12. System Control Connectors P.17 Inform
Краткое содержание страницы № 3
CASE 5600 series User Manual Confi guration (W x H x D) Dimension 7.9" x 17.3" x 19.4" M/B Size ATX, Micro ATX External : 4 x 5.25" + 2 x 3.5" Drive Bay Internal : 5 x 3.5" Expansion Slots 7Slots 1 x 12 cm fan in rear and 1 x 12 cm fan holder in front Thermal Solution Air Filter One air fi lter on the front panel ( only in R6A34) I/O Port Bracket Supports one I/O port bracket for standard ATX M/B Megal Material 0.8 mm thickness SECC rustproof & galvanized JIS Steel 2 © 2004-2006 Rosewill Inc. All
Краткое содержание страницы № 4
CASE 5600 series User Manual Features Descriptions Front 120mm Fan Rear 120mm Fan Sliding Rails for 5.25" Sliding Rails for 3.5" HDD device Screw-less Add-on Card Door opening up to 270 Easy-clean fi lter Easy-clean fi lter assembly Degree (in left side panel) (in front panel) 3 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 5
CASE 5600 series User Manual Screw-less and lockable Adjustable air inflow Front IO Ports Convenient Accessory box left side panel 4 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 6
CASE 5600 series User Manual Installation 1.Opening Chassis 1.1 1.3 1.4 Take off the thumb screws on the back plane Roll the side cover anticlockwise to open Push hooks marked in red circle to detach the 1.2 front panel from the chasis Push the Key-button 5 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 7
CASE 5600 series User Manual 2.Installing Motherboard ATX Motherboard Special motherboard stand-off 2.2 2.1 Sit the motherboard on our special Due to our special design of motherboard stand-off and screw in all the motherboard stand-off,copper screws into the motherboard stand-offs. motherboard stand-off not needed when you install the ATX motherboard. NOTE : The copper motherboard stand-off not needed when you install the ATX motherboard. DON'T SCREW THE COPPER MOTHERBOARD STAND-OFF INT
Краткое содержание страницы № 8
CASE 5600 series User Manual Micro ATX Motherboard 2.1 2.2 Locate and align the screw holes on the Sit the motherboard on themotherboar motherboard and chasis; place the stand-offs and screw in all the screws motherboard at the correct position, into the motherboard stand-offs. and then screw copper motherboard stand- offs brass studs onto chassis's metal shell. Note: Screw holes marked with "M" are motherboard stand-off positions for micro ATX motherboard. 7 © 2004-2006 Rosewill Inc. All r
Краткое содержание страницы № 9
CASE 5600 series User Manual 3.Installing 3.5" HDD 3.1 3.2 3.3 Insert the screw into the rubber pad hole on the rail Attach rails to bothe sides of Insert the railed HDD into the 3.25" HDD bay and push to the buttom your HDD NOTE : Screws for HDD have no thread, no screwdriver needed when you work step 3.2 8 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 10
CASE 5600 series User Manual 4.Installing 5.25" Device 4.1 4.3 Disassemble the front panel (please refer to step 1.4 ) Insert the railed 5.25" device into the 5.25" 4.2 drive bay Attach rails to both sides of your 5.25" device PS: You can also fasten rails on your 5.25" device by screws 9 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 11
CASE 5600 series User Manual 5.Installing Add on Card 5.1 5.2 5.3 Push out to loosen add on card kit Insert your add on card into the right slot Push down add on card kit to fasten the add on card 10 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 12
CASE 5600 series User Manual 6.Installing Floppy 6.1 6.2 6.3 6.4 Detach the front panel Unscrew the screws holding the Slide out the fl oppy cage Remove the metal cover (Please refer to Step 1.4, Page 5) fl oppy cage 11 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 13
CASE 5600 series User Manual 6.5 6.6 6.7 6.8 Secure the fl oppy on cage by Slide the fl oppy cage back Secure the fl oppy cage by Attach the front panel screws screws 12 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 14
CASE 5600 series User Manual 7.Cleaning Filters - Air Guide Filter 8.Cleaning Filters - Front panel Filter 7.1 8.1 8.2 Turn anticlockwise to take off the fi lter Push front panel hooks to detach Detach the fi lter from the front the front panel from the chassis panel ( please refer to step 1.4 ) 13 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 15
CASE 5600 series User Manual 9.USB Port NOTE : 1.Make sure that your motherboard offers USB interface. NOT every motherboard offers it. 2.NEVER connect a IEEE1394 connector to the USB pins. It will damage the motherboard. 9.1 Read your motherboard’s user manual to find the pins for the USB connector. 9.2 Find the USB connector and connect it to the pins. M/B USB PINS USB+5V USB+5V USB_P5 - USB_P8 - USB_P5 + USB_P8 + GND GND ON 14 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 16
CASE 5600 series User Manual 10.IEEE1394 Port NOTE : 1.Make sure that your motherboard offers IEEE1394 interface. NOT every motherboard offers it. 2.NEVER connect a USB cable to the IEEE1394 connectors. It will damage the motherboard. 10.1 Read your motherboard’s user manual to find the pins for the IEEE1394 connector. 10.2 Find the IEEE1394 connector and connect it to the pins. M/B IEEE1394 PINS GND TPA2+ +12V GND TPB2 TPB2+ GND +12V TPA2 15 © 2004-2006 Rosewill Inc. All rights reserved by R
Краткое содержание страницы № 17
CASE 5600 series User Manual 11.Audio Port NOTE : Make sure that your motherboard offers Audio interface for front panel. NOT every motherboard offers it. 10.1 Read your motherboard’s user manual to find the pins for the Audio connector. 10.2 Find the Audio connector and connect it to the pins. M/B Audio PINS MIC2 AGND MICPWR +5VA Line out_R Bline_out_R NC Line out_L Bline_out_L 16 © 2004-2006 Rosewill Inc. All rights reserved by Rosewill
Краткое содержание страницы № 18
CASE 5600 series User Manual 12.System Control Connectors 1. Read your motherboard’s user manual to find the pins for these system control connectors. 2. Refer to your motherboard’s user manual to connect these connectors correctly. Connectors System Warning Speaker SPEAKER PLED ATTENTION : ATX Power Switch The diagram is just an example. NOT every motherboard has the same layout of these system control pins. Please refer to your motherboard user’s manual to check the layout Reset Switch
Краткое содержание страницы № 19
CASE 5600 series User Manual Thank you for purchasing a High-Quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product. If you have any question while using our products, please visit our website : www.rosewill.com for latest driver & user manual or feel free to contact us at feedback@rosewill.com Support Phone Number: 800-575-9885 Support Email: techsupport@rosewill.com 18 © 2004-2006 Rosewill Inc. All righ
Краткое содержание страницы № 20
www.rosewill.com
